KSSM™ 10 • End Mill • Weldon Shank • Inch

Name: KSSM™ 10 • End Mill • Weldon Shank • Inch
SKU: 1229096
Rating: 0 (0 reviews)

Shoulder milling cutter for multiple materials.

Metryczne

Calowe

SAP Material Number	1229096
ISO Catalog Number	KISR150SP10T30F
ANSI Catalog Number	KISR150SP10T30F
[D1] Effective Cutting Diameter	38.1 mm
[D1] Effective Cutting Diameter	1.5 in
[D] Adapter / Shank / Bore Diameter	38.1 mm
[D] Adapter / Shank / Bore Diameter	1.5 in
[L] Overall Length	102.36 mm
[L] Overall Length	4.03 in
[L2] Head Length	34.04 mm
[L2] Head Length	1.34 in
[AP1MAX] 1st Maximum Cutting Depth	6.57 mm
[AP1MAX] 1st Maximum Cutting Depth	.259 in
Number of Inserts	4
Weight Pounds	1.63
Max RPM	30300

Zobacz wszystkie warianty produktów

Zastosowania

Face Milling
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Shank - Cylindrical Weldon 2 Flat

Materiały przedmiotu obrabianego

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

Poradnik doboru płytek

KSSM™ 10 • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..GE	KCPM40	.S..GE	KCPM40	.S..GEM	KCPM40
P3–P4	.E..GE	KCPM40	.S..GE	KCPK30	.S..GEM	KCPK30
P5–P6	.E..GE	KC725M	.S..GE	KC725M	.S..GEM	KCPK30
M1–M2	.E..GE	KCSM40	.S..GE	KCSM40	.S..GEM	KCPM40
M3	.E..GE	KCPM40	.S..GE	KCPM40	.S..GEM	KCPM40
K1–K2	.S..GE	KCK20B	.S..GE	KCK15	.S..GEM	KCK20B
K3	.S..GE	KCK20B	.S..GE	KCK15	.S..GEM	KCK20B
N1–N2	.E..GEJ	KC422M	.E..GEJ	KC422M	.E..GEJ	KC422M
N3	.E..GEJ	KC422M	.E..GEJ	KC422M	.E..GEJ	KC422M
S1–S2	.E..GE	KC725M	.S..GE	KC725M	.S..GE	KC725M
S3	.E..GE	KCSM40	.S..GE	KCSM40	.S..GE	KCSM40
S4	.E..GE	KCSM40	.S..GE	KCSM40	.S..GE	KCSM40
H1	–	–	–	–	–	–

Zalecane wyjściowe wartości posuwu [mm]

KSSM™ 10 • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LE	0,12	0,42	0,70	0,08	0,30	0,50	0,06	0,23	0,38	0,06	0,20	0,33	0,05	0,18	0,30
.E..LD2	0,12	0,46	0,81	0,09	0,33	0,58	0,07	0,25	0,43	0,06	0,22	0,38	0,05	0,20	0,35
.E..GB2	0,23	0,53	0,89	0,17	0,38	0,64	0,13	0,29	0,48	0,11	0,25	0,41	0,10	0,23	0,38
.S..GB2	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

KSSM™ 10 • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LE	0.005	0.017	0.028	0.003	0.012	0.020	0.003	0.009	0.015	0.002	0.008	0.013	0.002	0.007	0.012
.E..LD2	0.005	0.018	0.032	0.004	0.013	0.023	0.003	0.010	0.017	0.002	0.009	0.015	0.002	0.008	0.014
.E..GB2	0.009	0.021	0.035	0.007	0.015	0.025	0.005	0.011	0.019	0.004	0.010	0.016	0.004	0.009	0.015
.S..GB2	0.009	0.023	0.037	0.007	0.017	0.027	0.005	0.013	0.020	0.004	0.011	0.017	0.004	0.010	0.016
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

Zalecane wyjściowe wartości prędkości skrawania [m/min]

KSSM™ 10 • Recommended Starting Speed [m/min]
Grade		KCPM20			KC410M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KTPK20
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	550	485	450	–	–	–	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	365	300	255
	2	340	310	275	–	–	–	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	265	220	200
	3	310	275	255	–	–	–	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	245	200	180
	4	230	215	190	–	–	–	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	210	180	160
	5	275	250	230	–	–	–	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	185	170	150
	6	190	170	145	–	–	–	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	160	130	100
M	1	225	200	175	–	–	–	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	240	195	165
	2	205	175	160	–	–	–	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	215	185	150
	3	160	145	125	–	–	–	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	160	135	110
K	1	360	325	295	–	–	–	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	230	195	160
	2	285	255	235	–	–	–	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	185	150	130
	3	240	215	200	–	–	–	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	150	130	105
N	1	–	–	–	1215	1080	995	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	1080	995	915	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	1080	995	915	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	–	–	–
	2	–	–	–	–	–	–	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	–	–	–
	3	–	–	–	–	–	–	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	–	–	–
	4	–	–	–	–	–	–	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	–	–	–
H	1	140	115	95	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

KSSM™ 10 • Recommended Starting Speed [SFM]
Grade		KCPM20			KC410M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KTPK20
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	1805	1590	1475	–	–	–	855	755	705	–	–	–	1495	1295	1215	–	–	–	970	855	805	1200	985	835
	2	1115	1015	900	–	–	–	720	625	525	–	–	–	920	835	755	–	–	–	820	705	590	870	720	655
	3	1015	900	835	–	–	–	655	560	460	–	–	–	835	755	675	–	–	–	755	640	525	805	655	590
	4	755	705	625	–	–	–	590	490	395	–	–	–	740	605	525	–	–	–	675	560	445	690	590	525
	5	900	820	755	–	–	–	490	445	395	–	–	–	625	560	490	–	–	–	560	510	445	605	560	490
	6	625	560	475	–	–	–	425	330	260	–	–	–	525	445	360	–	–	–	490	375	295	525	425	330
M	1	740	655	575	–	–	–	560	490	445	–	–	–	675	605	510	–	–	–	640	560	510	785	640	540
	2	670	575	525	–	–	–	510	425	360	–	–	–	605	525	460	–	–	–	575	490	410	705	605	490
	3	525	475	410	–	–	–	375	330	260	–	–	–	475	425	375	–	–	–	425	375	295	525	445	360
K	1	1180	1065	970	–	–	–	–	–	–	1380	1265	1115	970	870	785	1180	950	805	–	–	–	755	640	525
	2	935	835	770	–	–	–	–	–	–	1100	970	900	770	690	625	920	755	640	–	–	–	605	490	425
	3	785	705	655	–	–	–	–	–	–	920	820	755	640	575	525	690	575	460	–	–	–	490	425	345
N	1	–	–	–	3985	3545	3265	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	3545	3265	3000	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	3545	3265	3000	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	–	–	–
	2	–	–	–	–	–	–	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	–	–	–
	3	–	–	–	–	–	–	150	115	80	–	–	–	–	–	–	–	–	–	165	130	100	–	–	–
	4	–	–	–	–	–	–	165	150	100	–	–	–	165	150	115	–	–	–	180	165	115	–	–	–
H	1	460	375	310	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Oznaczenie katalogowe ISO	Gatunek

Witamy

Potwierdź swoje preferencje

Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kontakt z Zespołem Sprzedaży

Kontakt z Zespołem Sprzedaży

Edytuj

Dodaj

KSSM™ 10 • End Mill • Weldon Shank • Inch