Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

TT GP HPV-CVKV form B/AD - 50

Shrink Fit Toolholders General Purpose (GP)

Metryczne
Calowe
SAP Material Number 3860047
ISO Catalog Number CVKV50HPVTT025350
ANSI Catalog Number CVKV50HPVTT025350
[D1] Adapter / Shank / Bore Diameter 6.35 mm
[D1] Adapter / Shank / Bore Diameter .25 in
[D2] Body Diameter 1 Workpiece Side 21 mm
[D2] Body Diameter 1 Workpiece Side .8268 in
[D21] Body Diameter 2 Workpiece Side 26.9 mm
[D21] Body Diameter 2 Workpiece Side 1.059 in
[L1] Gage Length 88.9 mm
[L1] Gage Length 3.5 in
Gage Length Face Contact [L1FC] 87.4 mm
Gage Length Face Contact [L1FC] 3.44 in
[L2] Usable Length 53.15 mm
[L2] Usable Length 2.092 in
[L9] Clamping Length 26 mm
[L9] Clamping Hole Length 1.023 in
[V] Adjustment Range 10 mm
[V] Adjustment Range .3937 in
Stop Screw ID Drive Size 2.5 mm
Weight Kilograms 3.19
Zobacz wszystkie warianty produktów

Zastosowania

  • Shank - 1"–8 unc DrawbarShank - 1"–8 unc Drawbar
  • Accuracy - 3μm or LessAccuracy - 3μm or Less
  • Drilling - Through CoolantDrilling - Through Coolant
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Shank -  Cylindrical  Weldon® ≤h6Shank - Cylindrical Weldon® ≤h6
  • Shank - Cylindrical Whistle Notch ≤h6Shank - Cylindrical Whistle Notch ≤h6
  • Axial Adjustment - EndAxial Adjustment - End
  • Balance - G 2.5@15,000 min-1Balance - G 2.5@15,000 min-1
  • Shank - SK CAT(CV) Taper Face ContactShank - SK CAT(CV) Taper Face Contact
  • Shank - 5/8"–11 unc DrawbarShank - 5/8"–11 unc Drawbar
  • Balance - G 2.5@20,000 min-1Balance - G 2.5@20,000 min-1

Właściwości i zalety

  • Balanceable — fine tune with optional M6 set screws.

  • Suitable for carbide and HSS cutting tools (requirements below).

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?