Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Пластины Kenloc™
Пластины Kenloc™
Пластины Kenloc™
Пластины Kenloc™

A-DDUN-KC 93°

Пластины Kenloc™

Использование и область применения

  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • Back BoringBack Boring
Выбрать фильтры
Filters
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (10)
    • N6
      Carbon, Graphite Composites, CFRP (10)
    • N7
      MMC's (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (10)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC (6)
    • H2
      Hardened Materials 48-55 HRC (6)
    • H3
      Hardened Materials 56-60 HRC (6)
    • H4
      Hardened Materials >60 HRC (6)
  • C CFRP Materials (10)
    • C1
      CFRP, CFRP / CFRP (10)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (10)
Выбрать First Choice
  • CN (7)
  • DE (7)
  • GB (2)
Applications
Applications
  • Back Boring Back Boring (10)
  • Multiple Direction Cutting Multiple Direction Cutting (10)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (10)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Interrupted (6)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (10)
  • 4.0 (10)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 7.875 in (2)
  • 9.843 in (4)
  • 11.811 in (2)
  • 13.781 in (2)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 200.0 mm (2)
  • 250.0 mm (4)
  • 300.0 mm (2)
  • 350.0 mm (2)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (10)
  • 0.008 in (4)
  • 0.014 in (6)
  • 0.016 in (10)
  • 0.031 in (10)
  • 0.047 in (10)
  • 0.063 in (6)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (10)
  • 0.2 mm (4)
  • 0.351 mm (6)
  • 0.4 mm (10)
  • 0.8 mm (10)
  • 1.201 mm (10)
  • 1.6 mm (6)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (6)
  • CL4 (6)
  • CM2 (6)
  • CM3 (6)
  • CPX (6)
  • CW2 (6)
  • HT2 (10)
  • K090 (6)
  • K10M (6)
  • K10P (6)
  • K10U (6)
  • K15U (6)
  • K20K (6)
  • K25M (10)
  • K25P (6)
  • K313 (10)
  • K35P (6)
  • K68 (6)
  • KB1340 (4)
  • KB9610 (6)
  • KB9640 (4)
  • KBH10 (6)
  • KBH10B (6)
  • KBH20 (6)
  • KBH20B (6)
  • KC210 (6)
  • KC5010 (10)
  • KC5025 (10)
  • KC5410 (6)
  • KC5510 (10)
  • KC5525 (10)
  • KC730 (4)
  • KC7310 (10)
  • KC8050 (10)
  • KC810 (10)
  • KC850 (10)
  • KC9010 (10)
  • KC9025 (10)
  • KC910 (6)
  • KC9105 (10)
  • KC9110 (10)
  • KC9120 (10)
  • KC9125 (10)
  • KC9140 (10)
  • KC9145 (6)
  • KC9210 (6)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (10)
  • KC9240NEW (10)
  • KC9245 (10)
  • KC9315 (10)
  • KC9320 (10)
  • KC9325 (10)
  • KC935 (10)
  • KC950 (6)
  • KC990 (10)
  • KCK05 (10)
  • KCK05B (10)
  • KCK15 (10)
  • KCK15B (10)
  • KCK20 (10)
  • KCK20B (10)
  • KCM15 (10)
  • KCM15B (10)
  • KCM25 (10)
  • KCM25B (10)
  • KCM35 (6)
  • KCM35B (6)
  • KCP05 (10)
  • KCP05B (10)
  • KCP10 (10)
  • KCP10B (10)
  • KCP25 (10)
  • KCP25B (10)
  • KCP25C (10)
  • KCP30 (10)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (6)
  • KCPK05 (10)
  • KCS10B (10)
  • KCU10 (10)
  • KCU10B (10)
  • KCU25 (10)
  • KCU25B (10)
  • KT125 (6)
  • KT175 (6)
  • KT315 (10)
  • KT325 (10)
  • KTP10 (10)
  • KU10T (10)
  • KU30T (10)
  • KY1320 (6)
  • KY1615 (6)
  • KY3000 (6)
  • KY3500 (6)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK35 (6)
  • NL200 (6)
  • NL250 (10)
  • NL300 (6)
  • NL920 (10)
  • PS5 (10)
  • SP0819 (6)
Hand Of Tool
Hand Of Tool
  • L (5)
  • R (5)
Wiper Insert
Wiper Insert
  • N (10)
  • Y (10)
F Dimension
F Dimension
  • 17.0 mm (2)
  • 22.0 mm (4)
  • 27.0 mm (2)
  • 35.0 mm (2)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.669 in (2)
  • 0.866 in (4)
  • 1.063 in (2)
  • 1.379 in (2)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (2)
  • 40.0 mm (4)
  • 50.0 mm (2)
  • 63.0 mm (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (2)
  • 1.575 in (4)
  • 1.969 in (2)
  • 2.48 in (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (2)
  • 5.039 in (4)
  • 6.299 in (2)
  • 7.875 in (2)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (2)
  • 128.0 mm (4)
  • 160.0 mm (2)
  • 200.0 mm (2)
Maximum Bore Depth Min до Maximum Bore Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (4)
  • B L (6)
  • C A (6)
  • C N (6)
  • D P (6)
  • H T (10)
  • H W (10)
backEnd
Back-End Diameter
Back-End Diameter
  • 25.0 mm (2)
  • 32.0 mm (4)
  • 40.0 mm (2)
  • 50.0 mm (2)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.984 in (2)
  • 1.26 in (4)
  • 1.575 in (2)
  • 1.969 in (2)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Измените видимые столбцы с помощью любого из перечисленных ниже параметров. Можно отобразить максимум 7 столбцов.
Показано 1- 10 . 10 результаты
Выбрать столбцы
Выбрать фильтры
Метрическая система
Дюймовая система
Показать
Метрическая система
Дюймовая система
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
2441940 A25RDDUNL11KC04 A25RDDUNL11KC04   25 .984 32 1.26 17 .669 200 7.874 1/4-18 NPT -5 DN..110408   15 IP
    Цена по прейскуранту:
    $365.96 /каждый
    Ваша цена::
    Кол-во
    2441939 A25RDDUNR11KC04 A25RDDUNR11KC04   25 .984 32 1.26 17 .669 200 7.874 1/4-18 NPT -5 DN..110408   15 IP
      Цена по прейскуранту:
      $365.96 /каждый
      Ваша цена::
      Кол-во
      2441942 A32SDDUNL11KC04 A32SDDUNL11KC04   32 1.26 40 1.575 22 .866 250 9.843 1/4-18 NPT -5 DN..110408 15 IP 15 IP
        Цена по прейскуранту:
        $413.29 /каждый
        Ваша цена::
        Кол-во
        2441946 A32SDDUNL15KC06 A32SDDUNL15KC06   32 1.26 40 1.575 22 .866 250 9.843 1/4-18 NPT -6 DN..150608 15 IP 15 IP
          Цена по прейскуранту:
          $413.29 /каждый
          Ваша цена::
          Кол-во
          2441941 A32SDDUNR11KC04 A32SDDUNR11KC04   32 1.26 40 1.575 22 .866 250 9.843 1/4-18 NPT -5 DN..110408 15 IP 15 IP
            Цена по прейскуранту:
            $413.29 /каждый
            Ваша цена::
            Кол-во
            2441945 A32SDDUNR15KC06 A32SDDUNR15KC06   32 1.26 40 1.575 22 .866 250 9.843 1/4-18 NPT -6 DN..150608 15 IP 15 IP
              Цена по прейскуранту:
              $413.29 /каждый
              Ваша цена::
              Кол-во
              2441948 A40TDDUNL15KC06 A40TDDUNL15KC06   40 1.575 50 1.969 27 1.063 300 11.811 1/4-18 NPT -5 DN..150608 15 IP 15 IP
                Цена по прейскуранту:
                $468.12 /каждый
                Ваша цена::
                Кол-во
                2441947 A40TDDUNR15KC06 A40TDDUNR15KC06   40 1.575 50 1.969 27 1.063 300 11.811 1/4-18 NPT -5 DN..150608 15 IP 15 IP
                  Цена по прейскуранту:
                  $468.12 /каждый
                  Ваша цена::
                  Кол-во
                  2441950 A50UDDUNL15KC06 A50UDDUNL15KC06   50 1.969 63 2.48 35 1.378 350 13.78 1/4-18 NPT -5 DN..150608 15 IP 15 IP
                    Цена по прейскуранту:
                    $601.45 /каждый
                    Ваша цена::
                    Кол-во
                    2441949 A50UDDUNR15KC06 A50UDDUNR15KC06   50 1.969 63 2.48 35 1.378 350 13.78 1/4-18 NPT -5 DN..150608 15 IP 15 IP
                      Цена по прейскуранту:
                      $601.45 /каждый
                      Ваша цена::
                      Кол-во
                      Цена по прейскуранту:
                      Скидка: %
                      Ваша цена::
                      Замена Данный товар недоступен
                      Продукция для замены Данный товар можно приобрести у дистрибьютора
                      Кол-во

                      Продается в упаковке из

                      Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
                      product-image
                      Please adjust the following properties from

                      Номер по каталогу ISO

                      Номер по каталогу ANSI

                      to find similar products.

                      The following files are available

                      Please select a file to download

                      Models

                      Product data

                      Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
                      Session expired due to inactivity, please login again
                      Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
                      товар(-ы) успешно добавлен(-ы) в корзину

                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                      Minimum quantity should be

                      SAP Material Number Номер по каталогу ISO Сплав    
                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                      You are about to leave the Solution building process.

                      Are you sure you want to leave?