Уведомления

Отметить все как прочитанные
Mobile Menu

Цельные твердосплавные сверла

Выбрать фильтры
Filters
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (5630)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5144)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5144)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (5144)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (5144)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (5220)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (5603)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (5603)
  • M Stainless Steel (4055)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4055)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4055)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4055)
  • K Cast Iron (4418)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4418)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4322)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4322)
  • N Non-Ferrous Materials (3734)
    • N1
      Wrought Aluminum
      (3712)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3734)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3734)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3712)
  • S High-Temp Alloys (3895)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3705)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3705)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3705)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3895)
  • H Hardened Materials (2044)
    • H1
      Hardened Materials 44-48 HRC
      (2044)
    • H2
      Hardened Materials 48-55 HRC
      (1857)
    • H3
      Hardened Materials 56-60 HRC
      (76)
    • H4
      Hardened Materials >60 HRC
      (76)
  • C CFRP Materials (30)
    • C1
      CFRP, CFRP / CFRP
      (10)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (20)
    • C3
      CFRP / Titanium CFRP / High Temp
      (20)
    • C4
      CFRP / Stainless Steel
      (20)
Выбрать First Choice
  • BR (157)
  • CN (881)
  • DE (856)
  • GB (568)
  • IN (182)
  • SG (297)
  • US (1137)
Applications
Applications
  • Convex Drilling Convex Drilling (340)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (196)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1190)
  • Counterboring Counterboring (196)
  • Countersinking Countersinking (112)
  • Cross Hole Drilling Cross Hole Drilling (2793)
  • Drilling Drilling (6556)
  • Flat Bottom Drilling Flat Bottom Drilling (196)
  • Inclined Entry Drilling Inclined Entry Drilling (292)
  • Inclined Exit Drilling Inclined Exit Drilling (2713)
  • Stacked Plates Drilling Stacked Plates Drilling (5860)
  • X-Offset Drilling X-Offset Drilling (2)
Cutting Diameter
Cutting Diameter
  • 0.098 in (32)
  • 0.119 in (59)
  • 0.122 in (29)
  • 0.125 in (53)
  • 0.126 in (35)
  • 0.13 in (41)
  • 0.134 in (29)
  • 0.138 in (56)
  • 0.143 in (29)
  • 0.146 in (33)
  • 0.15 in (37)
  • 0.154 in (30)
  • 0.156 in (46)
  • 0.157 in (65)
  • 0.161 in (41)
  • 0.165 in (51)
  • 0.169 in (37)
  • 0.177 in (66)
  • 0.181 in (31)
  • 0.185 in (32)
  • 0.188 in (46)
  • 0.189 in (45)
  • 0.193 in (32)
  • 0.197 in (68)
  • 0.201 in (74)
  • 0.206 in (45)
  • 0.209 in (31)
  • 0.213 in (55)
  • 0.217 in (60)
  • 0.219 in (54)
  • 0.221 in (44)
  • 0.224 in (29)
  • 0.228 in (53)
  • 0.237 in (67)
  • 0.24 in (33)
  • 0.244 in (40)
  • 0.25 in (65)
  • 0.252 in (30)
  • 0.256 in (61)
  • 0.257 in (31)
  • 0.26 in (36)
  • 0.264 in (30)
  • 0.266 in (42)
  • 0.268 in (58)
  • 0.272 in (40)
  • 0.276 in (67)
  • 0.281 in (48)
  • 0.291 in (37)
  • 0.295 in (50)
  • 0.297 in (30)
  • 0.307 in (36)
  • 0.313 in (59)
  • 0.315 in (69)
  • 0.319 in (31)
  • 0.323 in (31)
  • 0.328 in (37)
  • 0.335 in (69)
  • 0.339 in (30)
  • 0.343 in (33)
  • 0.345 in (48)
  • 0.347 in (42)
  • 0.354 in (64)
  • 0.358 in (32)
  • 0.359 in (34)
  • 0.374 in (48)
  • 0.375 in (58)
  • 0.386 in (35)
  • 0.391 in (33)
  • 0.394 in (69)
  • 0.402 in (57)
  • 0.406 in (32)
  • 0.408 in (42)
  • 0.414 in (64)
  • 0.422 in (45)
  • 0.425 in (35)
  • 0.433 in (62)
  • 0.438 in (37)
  • 0.453 in (85)
  • 0.465 in (40)
  • 0.47 in (39)
  • 0.473 in (68)
  • 0.484 in (50)
  • 0.492 in (59)
  • 0.5 in (61)
  • 0.512 in (57)
  • 0.516 in (40)
  • 0.531 in (62)
  • 0.551 in (64)
  • 0.564 in (57)
  • 0.572 in (47)
  • 0.591 in (52)
  • 0.61 in (38)
  • 0.625 in (38)
  • 0.63 in (54)
  • 0.65 in (37)
  • 0.669 in (40)
  • 0.69 in (38)
  • 0.709 in (41)
  • 0.748 in (31)
  • 0.787 in (33)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.5 mm (32)
  • 3.0 mm (59)
  • 3.1 mm (29)
  • 3.176 mm (53)
  • 3.2 mm (35)
  • 3.301 mm (41)
  • 3.401 mm (29)
  • 3.5 mm (56)
  • 3.6 mm (29)
  • 3.7 mm (33)
  • 3.801 mm (37)
  • 3.901 mm (30)
  • 3.975 mm (45)
  • 4.0 mm (65)
  • 4.101 mm (41)
  • 4.2 mm (51)
  • 4.3 mm (37)
  • 4.5 mm (66)
  • 4.601 mm (31)
  • 4.7 mm (32)
  • 4.775 mm (46)
  • 4.801 mm (45)
  • 4.9 mm (32)
  • 5.0 mm (68)
  • 5.101 mm (74)
  • 5.2 mm (45)
  • 5.301 mm (31)
  • 5.4 mm (55)
  • 5.5 mm (60)
  • 5.551 mm (53)
  • 5.601 mm (37)
  • 5.7 mm (29)
  • 5.801 mm (53)
  • 6.0 mm (67)
  • 6.101 mm (33)
  • 6.2 mm (40)
  • 6.351 mm (65)
  • 6.4 mm (30)
  • 6.5 mm (61)
  • 6.525 mm (31)
  • 6.601 mm (36)
  • 6.7 mm (30)
  • 6.75 mm (42)
  • 6.801 mm (58)
  • 6.9 mm (40)
  • 7.0 mm (67)
  • 7.15 mm (48)
  • 7.4 mm (37)
  • 7.5 mm (50)
  • 7.551 mm (30)
  • 7.801 mm (36)
  • 7.95 mm (59)
  • 8.0 mm (69)
  • 8.1 mm (31)
  • 8.201 mm (31)
  • 8.326 mm (37)
  • 8.5 mm (69)
  • 8.6 mm (30)
  • 8.701 mm (33)
  • 8.725 mm (48)
  • 8.8 mm (42)
  • 9.0 mm (64)
  • 9.1 mm (32)
  • 9.125 mm (34)
  • 9.5 mm (48)
  • 9.525 mm (58)
  • 9.8 mm (35)
  • 9.925 mm (33)
  • 10.0 mm (69)
  • 10.201 mm (57)
  • 10.3 mm (32)
  • 10.326 mm (42)
  • 10.5 mm (64)
  • 10.726 mm (45)
  • 10.8 mm (35)
  • 11.0 mm (62)
  • 11.125 mm (37)
  • 11.5 mm (85)
  • 11.8 mm (40)
  • 11.9 mm (39)
  • 12.0 mm (68)
  • 12.3 mm (50)
  • 12.5 mm (59)
  • 12.701 mm (61)
  • 13.0 mm (57)
  • 13.101 mm (40)
  • 13.5 mm (62)
  • 14.0 mm (64)
  • 14.3 mm (57)
  • 14.5 mm (47)
  • 15.0 mm (52)
  • 15.5 mm (38)
  • 15.875 mm (38)
  • 16.0 mm (54)
  • 16.5 mm (37)
  • 17.0 mm (40)
  • 17.5 mm (38)
  • 18.0 mm (41)
  • 19.0 mm (31)
  • 20.0 mm (33)
Cutting Diameter Min до Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (22)
  • 9.0 mm (20)
  • 10.0 mm (22)
  • 11.0 mm (18)
  • 12.0 mm (35)
  • 14.0 mm (169)
  • 15.0 mm (7)
  • 17.0 mm (206)
  • 17.401 mm (8)
  • 20.0 mm (250)
  • 21.401 mm (33)
  • 22.0 mm (5)
  • 22.6 mm (6)
  • 23.0 mm (155)
  • 24.0 mm (168)
  • 25.0 mm (28)
  • 25.901 mm (12)
  • 28.3 mm (15)
  • 28.6 mm (35)
  • 29.0 mm (335)
  • 30.0 mm (10)
  • 33.0 mm (66)
  • 34.7 mm (12)
  • 34.9 mm (52)
  • 35.0 mm (551)
  • 36.0 mm (6)
  • 38.1 mm (14)
  • 39.6 mm (12)
  • 40.0 mm (271)
  • 40.301 mm (45)
  • 41.0 mm (65)
  • 43.0 mm (552)
  • 44.0 mm (23)
  • 45.0 mm (186)
  • 48.0 mm (105)
  • 48.7 mm (42)
  • 49.0 mm (328)
  • 51.0 mm (126)
  • 53.1 mm (34)
  • 55.0 mm (98)
  • 55.6 mm (26)
  • 56.0 mm (306)
  • 57.0 mm (79)
  • 59.0 mm (6)
  • 60.0 mm (248)
  • 63.0 mm (197)
  • 63.5 mm (7)
  • 64.0 mm (53)
  • 64.5 mm (11)
  • 68.0 mm (6)
  • 70.0 mm (7)
  • 71.0 mm (148)
  • 72.0 mm (6)
  • 73.0 mm (9)
  • 74.0 mm (6)
  • 75.0 mm (14)
  • 76.2 mm (8)
  • 77.0 mm (113)
  • 79.0 mm (12)
  • 80.0 mm (107)
  • 83.0 mm (10)
  • 85.0 mm (10)
  • 88.9 mm (8)
  • 89.0 mm (9)
  • 90.0 mm (9)
  • 96.0 mm (102)
  • 100.0 mm (6)
  • 101.601 mm (6)
  • 104.0 mm (10)
  • 106.0 mm (6)
  • 112.0 mm (62)
  • 117.0 mm (13)
  • 118.0 mm (12)
  • 119.0 mm (13)
  • 120.0 mm (17)
  • 128.0 mm (56)
  • 134.0 mm (9)
  • 137.0 mm (6)
  • 141.0 mm (6)
  • 142.0 mm (9)
  • 144.0 mm (46)
  • 149.0 mm (8)
  • 150.0 mm (9)
  • 160.0 mm (33)
  • 164.0 mm (7)
  • 165.0 mm (9)
  • 178.0 mm (7)
  • 180.0 mm (9)
  • 194.0 mm (7)
  • 200.0 mm (9)
  • 210.0 mm (6)
  • 219.0 mm (6)
  • 239.0 mm (6)
  • 240.0 mm (14)
  • 297.0 mm (6)
  • 300.0 mm (9)
  • 320.0 mm (6)
  • 360.0 mm (6)
  • 400.0 mm (6)
Maximum Hole Depth [L4] Min до Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (13)
  • 0.237 in (22)
  • 0.354 in (20)
  • 0.394 in (22)
  • 0.433 in (18)
  • 0.473 in (35)
  • 0.551 in (169)
  • 0.591 in (7)
  • 0.669 in (206)
  • 0.685 in (8)
  • 0.787 in (250)
  • 0.843 in (33)
  • 0.866 in (5)
  • 0.89 in (6)
  • 0.906 in (155)
  • 0.946 in (168)
  • 0.984 in (28)
  • 1.02 in (12)
  • 1.114 in (15)
  • 1.127 in (35)
  • 1.143 in (335)
  • 1.181 in (10)
  • 1.299 in (66)
  • 1.366 in (12)
  • 1.374 in (52)
  • 1.379 in (551)
  • 1.417 in (6)
  • 1.5 in (14)
  • 1.559 in (12)
  • 1.575 in (271)
  • 1.587 in (45)
  • 1.614 in (65)
  • 1.693 in (552)
  • 1.732 in (23)
  • 1.772 in (186)
  • 1.891 in (105)
  • 1.917 in (42)
  • 1.929 in (328)
  • 2.008 in (126)
  • 2.091 in (34)
  • 2.165 in (98)
  • 2.189 in (26)
  • 2.205 in (306)
  • 2.244 in (79)
  • 2.323 in (6)
  • 2.362 in (248)
  • 2.48 in (197)
  • 2.5 in (7)
  • 2.52 in (53)
  • 2.539 in (11)
  • 2.677 in (6)
  • 2.757 in (7)
  • 2.795 in (148)
  • 2.835 in (6)
  • 2.874 in (9)
  • 2.914 in (6)
  • 2.953 in (14)
  • 3.0 in (8)
  • 3.031 in (113)
  • 3.11 in (12)
  • 3.15 in (107)
  • 3.269 in (10)
  • 3.346 in (10)
  • 3.5 in (8)
  • 3.504 in (9)
  • 3.543 in (9)
  • 3.781 in (102)
  • 3.938 in (6)
  • 4.0 in (6)
  • 4.094 in (10)
  • 4.173 in (6)
  • 4.409 in (62)
  • 4.606 in (13)
  • 4.646 in (12)
  • 4.686 in (13)
  • 4.724 in (17)
  • 5.039 in (56)
  • 5.276 in (9)
  • 5.394 in (6)
  • 5.551 in (6)
  • 5.591 in (9)
  • 5.67 in (46)
  • 5.867 in (8)
  • 5.906 in (9)
  • 6.299 in (33)
  • 6.457 in (7)
  • 6.496 in (9)
  • 7.008 in (7)
  • 7.087 in (9)
  • 7.638 in (7)
  • 7.875 in (9)
  • 8.268 in (6)
  • 8.622 in (6)
  • 9.409 in (6)
  • 9.449 in (14)
  • 11.693 in (6)
  • 11.811 in (9)
  • 12.598 in (6)
  • 14.173 in (6)
  • 15.749 in (6)
Maximum Hole Depth [L4] Min до Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (13)
  • 0.354 in (22)
  • 0.473 in (21)
  • 0.512 in (10)
  • 0.63 in (19)
  • 0.669 in (33)
  • 0.709 in (15)
  • 0.787 in (158)
  • 0.866 in (32)
  • 0.906 in (8)
  • 0.946 in (169)
  • 1.024 in (7)
  • 1.063 in (31)
  • 1.102 in (414)
  • 1.143 in (8)
  • 1.181 in (18)
  • 1.299 in (10)
  • 1.339 in (181)
  • 1.379 in (33)
  • 1.417 in (188)
  • 1.496 in (28)
  • 1.575 in (68)
  • 1.614 in (148)
  • 1.655 in (6)
  • 1.693 in (50)
  • 1.713 in (7)
  • 1.732 in (259)
  • 1.811 in (12)
  • 1.85 in (290)
  • 1.929 in (65)
  • 1.969 in (42)
  • 2.008 in (23)
  • 2.047 in (19)
  • 2.087 in (353)
  • 2.126 in (17)
  • 2.165 in (276)
  • 2.205 in (103)
  • 2.362 in (241)
  • 2.382 in (7)
  • 2.402 in (331)
  • 2.48 in (9)
  • 2.559 in (178)
  • 2.598 in (35)
  • 2.618 in (8)
  • 2.638 in (87)
  • 2.677 in (8)
  • 2.757 in (26)
  • 2.777 in (6)
  • 2.795 in (286)
  • 2.87 in (7)
  • 2.874 in (127)
  • 2.914 in (55)
  • 2.992 in (21)
  • 3.031 in (212)
  • 3.11 in (96)
  • 3.15 in (7)
  • 3.228 in (13)
  • 3.269 in (206)
  • 3.307 in (9)
  • 3.346 in (9)
  • 3.386 in (16)
  • 3.46 in (8)
  • 3.622 in (109)
  • 3.661 in (139)
  • 3.701 in (9)
  • 3.819 in (6)
  • 3.858 in (6)
  • 3.898 in (8)
  • 3.976 in (112)
  • 4.016 in (7)
  • 4.021 in (8)
  • 4.252 in (7)
  • 4.331 in (104)
  • 4.409 in (14)
  • 4.449 in (6)
  • 4.488 in (6)
  • 4.57 in (6)
  • 4.686 in (7)
  • 4.764 in (9)
  • 5.039 in (60)
  • 5.118 in (10)
  • 5.354 in (7)
  • 5.394 in (8)
  • 5.433 in (11)
  • 5.748 in (59)
  • 5.984 in (6)
  • 6.024 in (7)
  • 6.063 in (7)
  • 6.142 in (6)
  • 6.417 in (41)
  • 6.654 in (6)
  • 6.694 in (10)
  • 7.126 in (27)
  • 7.441 in (6)
  • 7.638 in (6)
  • 7.795 in (8)