successfully added to cart
View Cart

Обработка канавок и отрезка

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3535)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3535)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3535)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3535)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3535)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3535)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3535)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3535)
  • M Stainless Steel (3105)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3105)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3105)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3105)
  • K Cast Iron (3490)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3490)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3470)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3458)
  • N Non-Ferrous Materials (3266)
    • N1
      Wrought Aluminum
      (3258)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3063)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (364)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3266)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3071)
    • N6
      Carbon, Graphite Composites, CFRP
      (3063)
    • N7
      MMC's
      (356)
  • S High-Temp Alloys (3302)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3302)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3302)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3302)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3272)
  • H Hardened Materials (2044)
    • H1
      Hardened Materials 44-48 HRC
      (2044)
    • H2
      Hardened Materials 48-55 HRC
      (1799)
    • H3
      Hardened Materials 56-60 HRC
      (338)
    • H4
      Hardened Materials >60 HRC
      (338)
Select First Choice
  • CN (461)
  • DE (489)
  • GB (268)
  • IN (112)
  • US (586)
Applications
Applications
  • Back Boring Back Boring (143)
  • Boring Boring (1466)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (1174)
  • Deep Grooving Deep Grooving (72)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3123)
  • Facing Facing (297)
  • Grooving Grooving (3500)
  • ID Facing ID Facing (275)
  • ID Grooving ID Grooving (2394)
  • ID Thread Turning ID Thread Turning (108)
  • Multiple Direction Cutting Multiple Direction Cutting (493)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (2294)
  • Profiling Profiling (362)
  • TRN Boring TRN Boring (44)
  • Threading Threading (130)
  • Turning Turning (1577)
Cutting Length
Cutting Length
  • 26.0 mm (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (3037)
  • Lightly Interrupted Cut (3189)
  • Smooth Cut (3689)
  • Varying Depth of Cut (3492)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (20)
  • 90.0 (1392)
  • 92.25 (26)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (6)
  • Boring Bar Shank (186)
  • Cutoff Support Blade A1-A3 (80)
  • Toolholder (800)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1903)
  • 2.0 (2260)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 mm (27)
  • 0.051 mm (40)
  • 0.057 mm (38)
  • 0.066 mm (78)
  • 0.076 mm (187)
  • 0.08 mm (151)
  • 0.089 mm (166)
  • 0.09 mm (122)
  • 0.094 mm (78)
  • 0.097 mm (38)
  • 0.1 mm (166)
  • 0.102 mm (146)
  • 0.116 mm (40)
  • 0.117 mm (38)
  • 0.127 mm (78)
  • 0.131 mm (78)
  • 0.132 mm (78)
  • 0.133 mm (78)
  • 0.15 mm (134)
  • 0.155 mm (78)
  • 0.157 mm (78)
  • 0.16 mm (36)
  • 0.165 mm (114)
  • 0.173 mm (78)
  • 0.178 mm (78)
  • 0.185 mm (87)
  • 0.19 mm (399)
  • 0.191 mm (732)
  • 0.198 mm (78)
  • 0.2 mm (1152)
  • 0.202 mm (114)
  • 0.203 mm (228)
  • 0.224 mm (78)
  • 0.235 mm (78)
  • 0.244 mm (40)
  • 0.25 mm (125)
  • 0.251 mm (78)
  • 0.254 mm (167)
  • 0.269 mm (78)
  • 0.282 mm (78)
  • 0.284 mm (78)
  • 0.3 mm (424)
  • 0.315 mm (143)
  • 0.318 mm (155)
  • 0.33 mm (78)
  • 0.34 mm (78)
  • 0.343 mm (36)
  • 0.356 mm (78)
  • 0.38 mm (1)
  • 0.4 mm (1206)
  • 0.404 mm (78)
  • 0.406 mm (86)
  • 0.43 mm (78)
  • 0.445 mm (114)
  • 0.472 mm (40)
  • 0.49 mm (78)
  • 0.5 mm (75)
  • 0.508 mm (82)
  • 0.565 mm (23)
  • 0.57 mm (44)
  • 0.572 mm (294)
  • 0.575 mm (89)
  • 0.75 mm (70)
  • 0.787 mm (209)
  • 0.79 mm (190)
  • 0.794 mm (182)
  • 0.8 mm (843)
  • 0.826 mm (13)
  • 0.84 mm (52)
  • 0.902 mm (114)
  • 1.0 mm (338)
  • 1.06 mm (172)
  • 1.18 mm (30)
  • 1.19 mm (154)
  • 1.194 mm (186)
  • 1.195 mm (43)
  • 1.2 mm (150)
  • 1.21 mm (13)
  • 1.22 mm (18)
  • 1.25 mm (147)
  • 1.5 mm (465)
  • 1.525 mm (72)
  • 1.56 mm (234)
  • 1.585 mm (92)
  • 1.588 mm (316)
  • 1.59 mm (322)
  • 1.65 mm (232)
  • 1.75 mm (147)
  • 1.98 mm (41)
  • 1.981 mm (90)
  • 2.0 mm (360)
  • 2.025 mm (59)
  • 2.06 mm (189)
  • 2.25 mm (114)
  • 2.37 mm (183)
  • 2.38 mm (241)
  • 2.388 mm (155)
  • 2.39 mm (21)
  • 2.44 mm (188)
  • 2.5 mm (255)
  • 2.525 mm (49)
  • 2.56 mm (171)
  • 2.781 mm (1)
  • 3.0 mm (178)
  • 3.025 mm (45)
  • 3.06 mm (137)
  • 3.17 mm (136)
  • 3.175 mm (106)
  • 3.18 mm (63)
  • 3.24 mm (133)
  • 3.96 mm (35)
  • 3.969 mm (17)
  • 3.97 mm (16)
  • 4.0 mm (52)
  • 4.025 mm (23)
  • 4.03 mm (33)
  • 4.06 mm (37)
  • 4.76 mm (11)
  • 4.763 mm (12)
  • 5.0 mm (13)
  • 5.025 mm (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 in (27)
  • 0.002 in (40)
  • 0.0023 in (38)
  • 0.0026 in (78)
  • 0.003 in (187)
  • 0.0031 in (151)
  • 0.0035 in (220)
  • 0.0037 in (78)
  • 0.0038 in (38)
  • 0.004 in (166)
  • 0.0046 in (78)
  • 0.005 in (186)
  • 0.0052 in (78)
  • 0.0053 in (78)
  • 0.0059 in (84)
  • 0.006 in (131)
  • 0.0062 in (78)
  • 0.0065 in (114)
  • 0.0068 in (78)
  • 0.007 in (78)
  • 0.0075 in (1000)
  • 0.0076 in (225)
  • 0.0078 in (78)
  • 0.0079 in (270)
  • 0.008 in (1181)
  • 0.0088 in (78)
  • 0.0093 in (78)
  • 0.0096 in (40)
  • 0.0099 in (78)
  • 0.01 in (178)
  • 0.0106 in (78)
  • 0.0111 in (78)
  • 0.0112 in (78)
  • 0.0118 in (78)
  • 0.012 in (346)
  • 0.0124 in (78)
  • 0.0125 in (201)
  • 0.013 in (78)
  • 0.0135 in (114)
  • 0.014 in (78)
  • 0.015 in (110)
  • 0.0156 in (411)
  • 0.0157 in (578)
  • 0.0158 in (183)
  • 0.0159 in (78)
  • 0.016 in (1256)
  • 0.017 in (78)
  • 0.0175 in (114)
  • 0.0186 in (40)
  • 0.0193 in (78)
  • 0.0197 in (75)
  • 0.02 in (82)
  • 0.0225 in (317)
  • 0.0295 in (70)
  • 0.03 in (128)
  • 0.031 in (1008)
  • 0.0312 in (109)
  • 0.0313 in (182)
  • 0.0315 in (332)
  • 0.032 in (605)
  • 0.0325 in (13)
  • 0.033 in (52)
  • 0.0355 in (114)
  • 0.039 in (185)
  • 0.0394 in (153)
  • 0.042 in (172)
  • 0.046 in (30)
  • 0.047 in (459)
  • 0.048 in (31)
  • 0.0492 in (147)
  • 0.059 in (295)
  • 0.0591 in (234)
  • 0.06 in (72)
  • 0.062 in (301)
  • 0.0625 in (336)
  • 0.063 in (294)
  • 0.065 in (232)
  • 0.0689 in (147)
  • 0.078 in (93)
  • 0.0785 in (61)
  • 0.0787 in (116)
  • 0.079 in (235)
  • 0.0797 in (59)
  • 0.081 in (189)
  • 0.0886 in (114)
  • 0.093 in (183)
  • 0.0937 in (1)
  • 0.094 in (399)
  • 0.096 in (188)
  • 0.098 in (209)
  • 0.0984 in (85)
  • 0.0985 in (43)
  • 0.0994 in (49)
  • 0.101 in (171)
  • 0.106 in (38)
  • 0.1095 in (1)
  • 0.115 in (39)
  • 0.118 in (172)
  • 0.1181 in (43)
  • 0.1191 in (45)
  • 0.121 in (137)
  • 0.125 in (248)
  • 0.127 in (130)
  • 0.128 in (131)
  • 0.155 in (17)
  • 0.156 in (51)
  • 0.1565 in (17)
  • 0.157 in (31)
  • 0.1575 in (19)
  • 0.158 in (48)
  • 0.1585 in (23)
  • 0.159 in (30)
  • 0.16 in (37)
  • 0.1875 in (12)
  • 0.188 in (11)
  • 0.1969 in (11)
  • 0.197 in (13)
  • 0.1978 in (15)
  • 0.787 in (109)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (3110)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (3110)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (1591)
  • Lightly Interrupted Cut (1743)
  • Smooth Cut (2243)
  • Varying Depth of Cut (2046)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1 (5)
  • K1025 (106)
  • K2885 (146)
  • K313 (1425)
  • K420 (216)
  • K4H (110)
  • K68 (303)
  • KB1345 (114)
  • KB1630 (329)
  • KB5625 (282)
  • KC250 (151)
  • KC5010 (705)
  • KC5025 (823)
  • KC5410 (186)
  • KC710 (182)
  • KC720 (213)
  • KC722 (182)
  • KC730 (417)
  • KC732 (78)
  • KC810 (198)
  • KC850 (340)
  • KC910 (110)
  • KC9110 (460)
  • KC9120 (78)
  • KC9125 (278)
  • KC9320 (182)
  • KC935 (182)
  • KC950 (182)
  • KCK20 (380)
  • KCK20B (1118)
  • KCM35B (721)
  • KCP10 (310)
  • KCP10B (1180)
  • KCP25 (312)
  • KCP25B (1236)
  • KCU10 (1783)
  • KCU25 (2109)
  • KD050 (40)
  • KD081 (78)
  • KD100 (97)
  • KD120 (114)
  • KD1405 (161)
  • KD1425 (86)
  • KMF (33)
  • KMS (105)
  • KT175 (146)
  • KT315 (486)
  • KU10 (277)
  • KU10T (182)
  • KU25T (182)
  • KU30T (377)
  • KY3000 (114)
  • KY3500 (234)
  • KY4300 (6)
  • KYS30 (99)
  • SP88F8 (38)
Hand Of Tool
Hand Of Tool
  • L (482)
  • N (54)
  • N - Neutral (3)
  • R (533)
Wiper Insert
Wiper Insert
  • N (3864)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (147)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.625 in (4)
  • 0.6299 in (4)
  • 0.63 in (4)
  • 0.6693 in (3)
  • 0.728 in (2)
  • 0.73 in (4)
  • 0.787 in (13)
  • 0.7874 in (4)
  • 0.8 in (1)
  • 0.8268 in (3)
  • 0.866 in (2)
  • 0.8661 in (1)
  • 0.984 in (16)
  • 0.9843 in (15)
  • 1.0 in (6)
  • 1.02 in (1)
  • 1.0236 in (5)
  • 1.024 in (5)
  • 1.125 in (4)
  • 1.177 in (1)
  • 1.181 in (7)
  • 1.25 in (6)
  • 1.2598 in (6)
  • 1.26 in (11)
  • 1.299 in (4)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.378 in (8)
  • 1.4173 in (5)
  • 1.496 in (1)
  • 1.5 in (8)
  • 1.5748 in (5)
  • 1.575 in (22)
  • 1.61 in (1)
  • 1.614 in (3)
  • 1.626 in (57)
  • 1.6535 in (5)
  • 1.732 in (2)
  • 1.7323 in (4)
  • 1.75 in (2)
  • 1.874 in (56)
  • 1.8898 in (3)
  • 1.9685 in (6)
  • 1.969 in (28)
  • 2.0 in (2)
  • 2.047 in (5)
  • 2.0472 in (8)
  • 2.126 in (4)
  • 2.2 in (3)
  • 2.229 in (49)
  • 2.25 in (6)
  • 2.252 in (29)
  • 2.2835 in (4)
  • 2.362 in (48)
  • 2.3622 in (6)
  • 2.375 in (4)
  • 2.5 in (22)
  • 2.5197 in (4)
  • 2.559 in (1)
  • 2.6772 in (4)
  • 2.75 in (4)
  • 2.7559 in (8)
  • 2.9528 in (6)
  • 2.953 in (52)
  • 3.0 in (8)
  • 3.1496 in (7)
  • 3.15 in (4)
  • 3.25 in (4)
  • 3.5 in (535)
  • 3.5433 in (7)
  • 3.622 in (3)
  • 3.937 in (70)
  • 4.7244 in (11)
  • 5.0 in (1)
  • 5.1181 in (4)
  • 5.1969 in (4)
  • 5.5 in (733)
  • 5.75 in (3)
  • 6.874 in (125)
  • 7.0866 in (3)
  • 7.087 in (67)
  • 7.2441 in (3)
  • 7.874 in (7)
  • 8.252 in (236)
  • 8.752 in (58)
  • 9.8425 in (9)
  • 9.843 in (62)
  • 11.4173 in (6)
  • 13.11 in (4)
  • 13.7795 in (3)
  • 13.78 in (63)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (147)
  • 11.176 mm (1)
  • 11.18 mm (1)
  • 11.5 mm (2)
  • 15.88 mm (4)
  • 16.0 mm (8)
  • 17.0 mm (3)
  • 18.5 mm (2)
  • 18.542 mm (4)
  • 19.99 mm (1)
  • 20.0 mm (16)
  • 20.32 mm (1)
  • 21.0 mm (3)
  • 22.0 mm (3)
  • 24.994 mm (1)
  • 25.0 mm (30)
  • 25.4 mm (6)
  • 26.0 mm (11)
  • 28.575 mm (3)
  • 28.58 mm (1)
  • 30.0 mm (8)
  • 31.75 mm (6)
  • 32.0 mm (17)
  • 33.0 mm (4)
  • 34.0 mm (4)
  • 34.92 mm (2)
  • 34.925 mm (4)
  • 35.0 mm (8)
  • 36.0 mm (5)
  • 37.998 mm (1)
  • 38.1 mm (8)
  • 40.0 mm (27)
  • 41.0 mm (4)
  • 41.3 mm (57)
  • 42.0 mm (5)
  • 44.0 mm (6)
  • 44.45 mm (2)
  • 47.6 mm (56)
  • 48.0 mm (3)
  • 50.0 mm (34)
  • 50.8 mm (2)
  • 52.0 mm (13)
  • 54.0 mm (4)
  • 55.88 mm (3)
  • 56.625 mm (49)
  • 57.15 mm (6)
  • 57.2 mm (29)
  • 58.0 mm (4)
  • 60.0 mm (54)
  • 60.325 mm (4)
  • 63.5 mm (22)
  • 64.0 mm (4)
  • 65.0 mm (1)
  • 68.0 mm (4)
  • 69.85 mm (4)
  • 70.0 mm (8)
  • 75.0 mm (58)
  • 76.2 mm (8)
  • 80.0 mm (11)
  • 82.55 mm (4)
  • 88.9 mm (535)
  • 90.0 mm (7)
  • 92.0 mm (3)
  • 100.0 mm (70)
  • 120.0 mm (11)
  • 127.0 mm (1)
  • 130.0 mm (4)
  • 132.0 mm (4)
  • 139.7 mm (733)
  • 146.05 mm (3)
  • 174.6 mm (125)
  • 180.0 mm (70)
  • 184.0 mm (3)
  • 200.0 mm (7)
  • 209.6 mm (236)
  • 222.3 mm (58)
  • 250.0 mm (71)
  • 290.0 mm (6)
  • 333.0 mm (4)
  • 350.0 mm (66)
Minimum Axial Groove Diameter Min