Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

Kennametal At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Цельные концевые фрезы

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (4857)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3621)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3621)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3670)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3989)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4576)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3725)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2806)
  • M Stainless Steel (4233)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4233)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4176)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3381)
  • K Cast Iron (3679)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3679)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3622)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2849)
  • N Non-Ferrous Materials (1468)
    • N1
      Wrought Aluminum
      (1413)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1413)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1092)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1236)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (367)
    • N6
      Carbon, Graphite Composites, CFRP
      (112)
    • N7
      MMC's
      (80)
  • S High-Temp Alloys (3010)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2938)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2887)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2935)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2854)
  • H Hardened Materials (3926)
    • H1
      Hardened Materials 44-48 HRC
      (3914)
    • H2
      Hardened Materials 48-55 HRC
      (1614)
    • H3
      Hardened Materials 56-60 HRC
      (447)
    • H4
      Hardened Materials >60 HRC
      (359)
  • C CFRP Materials (48)
    • C1
      CFRP, CFRP / CFRP
      (48)
Выбрать First Choice
  • BR (91)
  • CN (365)
  • DE (598)
  • GB (280)
  • IN (75)
  • SG (187)
  • US (998)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Concave Radius Milling Concave Radius Milling (16)
  • Drilling Drilling (247)
  • Face Milling Face Milling (1861)
  • Pocket Pocket (5838)
  • Pocket Helical Pocket Helical (5836)
  • Pocket Milling Pocket Milling (6059)
  • Pocket Plunge Milling Pocket Plunge Milling (1728)
  • Profile Milling Profile Milling (804)
  • Ramping Ramping (5428)
  • Shoulder Ball Nose Shoulder Ball Nose (1059)
  • Shoulder Milling Shoulder Milling (6299)
  • Shoulder Roughing Shoulder Roughing (2555)
  • Shoulder Square End Shoulder Square End (5331)
  • Slot Ball Nose Slot Ball Nose (435)
  • Slot Milling Slot Milling (4061)
  • Slot Square End Slot Square End (3791)
  • Trochoidal Milling Trochoidal Milling (1204)
Cutting Diameter
Cutting Diameter
  • 0.012 in (4)
  • 0.016 in (8)
  • 0.02 in (31)
  • 0.024 in (18)
  • 0.031 in (26)
  • 0.039 in (28)
  • 0.047 in (15)
  • 0.055 in (4)
  • 0.06 in (26)
  • 0.063 in (15)
  • 0.072 in (10)
  • 0.078 in (8)
  • 0.079 in (66)
  • 0.094 in (16)
  • 0.095 in (1)
  • 0.098 in (33)
  • 0.109 in (6)
  • 0.11 in (4)
  • 0.119 in (85)
  • 0.125 in (96)
  • 0.135 in (1)
  • 0.138 in (18)
  • 0.142 in (5)
  • 0.15 in (5)
  • 0.156 in (22)
  • 0.157 in (120)
  • 0.173 in (2)
  • 0.177 in (8)
  • 0.179 in (1)
  • 0.18 in (1)
  • 0.187 in (1)
  • 0.188 in (111)
  • 0.189 in (5)
  • 0.197 in (95)
  • 0.203 in (4)
  • 0.217 in (6)
  • 0.219 in (19)
  • 0.224 in (1)
  • 0.226 in (5)
  • 0.234 in (3)
  • 0.237 in (215)
  • 0.239 in (1)
  • 0.25 in (283)
  • 0.255 in (1)
  • 0.256 in (1)
  • 0.26 in (1)
  • 0.266 in (2)
  • 0.276 in (20)
  • 0.281 in (11)
  • 0.297 in (3)
  • 0.299 in (1)
  • 0.303 in (1)
  • 0.305 in (4)
  • 0.312 in (1)
  • 0.313 in (160)
  • 0.315 in (231)
  • 0.328 in (3)
  • 0.345 in (10)
  • 0.354 in (12)
  • 0.355 in (1)
  • 0.359 in (2)
  • 0.364 in (1)
  • 0.374 in (1)
  • 0.375 in (381)
  • 0.38 in (1)
  • 0.382 in (6)
  • 0.391 in (2)
  • 0.393 in (1)
  • 0.394 in (334)
  • 0.408 in (7)
  • 0.422 in (2)
  • 0.433 in (1)
  • 0.437 in (4)
  • 0.438 in (65)
  • 0.44 in (1)
  • 0.449 in (1)
  • 0.453 in (2)
  • 0.461 in (6)
  • 0.47 in (4)
  • 0.473 in (382)
  • 0.484 in (2)
  • 0.5 in (580)
  • 0.505 in (1)
  • 0.539 in (6)
  • 0.551 in (91)
  • 0.564 in (20)
  • 0.591 in (1)
  • 0.618 in (6)
  • 0.625 in (395)
  • 0.629 in (3)
  • 0.63 in (361)
  • 0.687 in (3)
  • 0.689 in (1)
  • 0.698 in (5)
  • 0.709 in (57)
  • 0.75 in (548)
  • 0.776 in (6)
  • 0.787 in (342)
  • 0.875 in (15)
  • 0.984 in (233)
  • 1.0 in (530)
  • 1.25 in (127)
  • 1.26 in (16)
  • 1.5 in (92)
  • 1.575 in (2)
  • 1.969 in (1)
  • 2.0 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.301 mm (4)
  • 0.4 mm (8)
  • 0.5 mm (31)
  • 0.601 mm (18)
  • 0.8 mm (26)
  • 1.0 mm (28)
  • 1.201 mm (15)
  • 1.401 mm (4)
  • 1.5 mm (26)
  • 1.6 mm (15)
  • 1.8 mm (10)
  • 1.975 mm (8)
  • 2.0 mm (66)
  • 2.375 mm (16)
  • 2.401 mm (1)
  • 2.5 mm (33)
  • 2.776 mm (6)
  • 2.801 mm (4)
  • 3.0 mm (85)
  • 3.176 mm (96)
  • 3.426 mm (1)
  • 3.5 mm (18)
  • 3.575 mm (5)
  • 3.801 mm (5)
  • 3.95 mm (2)
  • 3.975 mm (20)
  • 4.0 mm (120)
  • 4.375 mm (2)
  • 4.5 mm (8)
  • 4.55 mm (1)
  • 4.575 mm (1)
  • 4.75 mm (1)
  • 4.775 mm (111)
  • 4.801 mm (5)
  • 5.0 mm (95)
  • 5.15 mm (4)
  • 5.5 mm (6)
  • 5.551 mm (19)
  • 5.7 mm (1)
  • 5.75 mm (5)
  • 5.95 mm (3)
  • 6.0 mm (215)
  • 6.051 mm (1)
  • 6.351 mm (283)
  • 6.476 mm (1)
  • 6.5 mm (1)
  • 6.601 mm (1)
  • 6.75 mm (2)
  • 7.0 mm (20)
  • 7.15 mm (11)
  • 7.551 mm (3)
  • 7.601 mm (1)
  • 7.7 mm (1)
  • 7.75 mm (4)
  • 7.926 mm (1)
  • 7.95 mm (160)
  • 8.0 mm (231)
  • 8.326 mm (3)
  • 8.725 mm (10)
  • 9.0 mm (12)
  • 9.025 mm (1)
  • 9.125 mm (2)
  • 9.25 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (381)
  • 9.65 mm (1)
  • 9.701 mm (6)
  • 9.925 mm (2)
  • 9.976 mm (1)
  • 10.0 mm (334)
  • 10.326 mm (7)
  • 10.726 mm (2)
  • 11.0 mm (1)
  • 11.101 mm (4)
  • 11.125 mm (65)
  • 11.175 mm (1)
  • 11.4 mm (1)
  • 11.5 mm (2)
  • 11.701 mm (6)
  • 11.9 mm (4)
  • 12.0 mm (382)
  • 12.3 mm (2)
  • 12.701 mm (580)
  • 12.826 mm (1)
  • 13.701 mm (6)
  • 14.0 mm (91)
  • 14.3 mm (20)
  • 15.0 mm (1)
  • 15.701 mm (6)
  • 15.875 mm (395)
  • 15.976 mm (3)
  • 16.0 mm (361)
  • 17.45 mm (3)
  • 17.475 mm (1)
  • 17.7 mm (5)
  • 18.0 mm (57)
  • 19.05 mm (548)
  • 19.701 mm (6)
  • 20.0 mm (342)
  • 22.225 mm (15)
  • 25.0 mm (233)
  • 25.401 mm (530)
  • 31.75 mm (127)
  • 32.0 mm (16)
  • 38.1 mm (92)
  • 40.0 mm (2)
  • 50.0 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.45 mm (1)
  • 7.625 mm (1)
  • 7.95 mm (1)
  • 8.625 mm (1)
  • 9.025 mm (1)
  • 9.25 mm (1)
  • 9.525 mm (4)
  • 9.625 mm (1)
  • 10.0 mm (4)
  • 11.101 mm (1)
  • 11.451 mm (1)
  • 11.625 mm (2)
  • 12.0 mm (5)
  • 12.101 mm (1)
  • 12.701 mm (5)
  • 13.451 mm (1)
  • 14.625 mm (1)
  • 14.8 mm (1)
  • 14.826 mm (1)
  • 14.925 mm (1)
  • 14.951 mm (1)
  • 15.0 mm (1)
  • 15.101 mm (1)
  • 15.175 mm (1)
  • 15.25 mm (1)
  • 15.275 mm (1)
  • 15.351 mm (1)
  • 15.451 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (5)
  • 25.401 mm (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.293 in (1)
  • 0.3 in (1)
  • 0.313 in (1)
  • 0.34 in (1)
  • 0.355 in (1)
  • 0.364 in (1)
  • 0.375 in (4)
  • 0.379 in (1)
  • 0.394 in (4)
  • 0.437 in (1)
  • 0.451 in (1)
  • 0.458 in (2)
  • 0.473 in (5)
  • 0.477 in (1)
  • 0.5 in (5)
  • 0.53 in (1)
  • 0.577 in (1)
  • 0.583 in (1)
  • 0.584 in (1)
  • 0.588 in (1)
  • 0.589 in (1)
  • 0.591 in (1)
  • 0.595 in (1)
  • 0.597 in (1)
  • 0.6 in (1)
  • 0.601 in (1)
  • 0.604 in (1)
  • 0.608 in (1)
  • 0.625 in (3)
  • 0.63 in (5)
  • 1.0 in (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.2 mm (2)
  • 0.25 mm (1)
  • 0.275 mm (1)
  • 0.301 mm (3)
  • 0.325 mm (2)
  • 0.351 mm (1)
  • 0.4 mm (5)
  • 0.426 mm (3)
  • 0.5 mm (5)
  • 0.525 mm (4)
  • 0.55 mm (1)
  • 0.601 mm (4)
  • 0.625 mm (4)
  • 0.675 mm (4)
  • 0.701 mm (4)
  • 0.75 mm (1)
  • 0.8 mm (4)
  • 0.851 mm (6)
  • 0.9 mm (4)
  • 1.0 mm (18)
  • 1.026 mm (2)
  • 1.05 mm (3)
  • 1.201 mm (8)
  • 1.3 mm (8)
  • 1.401 mm (1)
  • 1.5 mm (25)
  • 1.526 mm (3)
  • 1.6 mm (15)
  • 1.701 mm (1)
  • 1.8 mm (7)
  • 1.901 mm (2)
  • 1.975 mm (5)
  • 2.0 mm (40)
  • 2.1 mm (3)
  • 2.2 mm (3)
  • 2.301 mm (4)
  • 2.401 mm (11)
  • 2.5 mm (8)
  • 2.551 mm (2)
  • 2.7 mm (4)
  • 2.776 mm (3)
  • 3.0 mm (43)
  • 3.051 mm (3)
  • 3.176 mm (7)
  • 3.2 mm (6)
  • 3.575 mm (3)
  • 3.6 mm (2)
  • 3.7 mm (4)
  • 3.95 mm (1)
  • 3.975 mm (7)
  • 4.0 mm (68)
  • 4.5 mm (7)
  • 4.525 mm (1)
  • 4.75 mm (12)
  • 4.775 mm (7)
  • 5.0 mm (62)
  • 5.15 mm (4)
  • 5.551 mm (2)
  • 5.95 mm (3)
  • 6.0 mm (87)
  • 6.301 mm (6)
  • 6.351 mm (40)
  • 6.75 mm (4)
  • 7.0 mm (40)
  • 7.15 mm (6)
  • 7.5 mm (6)
  • 7.551 mm (5)
  • 7.926 mm (2)
  • 7.95 mm (29)
  • 8.0 mm (86)
  • 8.326 mm (5)
  • 9.0 mm (55)
  • 9.5 mm (4)
  • 9.525 mm (91)
  • 10.0 mm (74)
  • 10.726 mm (6)
  • 11.0 mm (50)
  • 11.101 mm (3)
  • 11.125 mm (17)
  • 11.9 mm (3)
  • 12.0 mm (120)
  • 12.3 mm (6)
  • 12.701 mm (168)
  • 13.0 mm (104)
  • 14.0 mm (31)
  • 14.3 mm (73)
  • 15.0 mm (118)
  • 15.875 mm (216)
  • 16.0 mm (98)
  • 17.0 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (142)
  • 18.55 mm (1)
  • 19.0 mm (77)
  • 19.05 mm (304)
  • 20.0 mm (43)
  • 20.625 mm (3)
  • 20.651 mm (38)
  • 21.0 mm (1)
  • 22.0 mm (120)
  • 22.225 mm (148)
  • 23.3 mm (1)
  • 23.8 mm (23)
  • 23.826 mm (19)
  • 24.0 mm (160)
  • 25.0 mm (24)
  • 25.401 mm (295)
  • 26.0 mm (171)
  • 28.0 mm (9)
  • 28.576 mm (113)
  • 29.0 mm (1)
  • 30.0 mm (152)
  • 30.175 mm (3)
  • 30.451 mm (1)
  • 30.5 mm (1)
  • 31.0 mm (3)
  • 31.701 mm (4)
  • 31.75 mm (318)
  • 32.0 mm (181)
  • 33.0 mm (3)
  • 33.35 mm (1)
  • 34.926 mm (4)
  • 35.0 mm (2)
  • 35.676 mm (1)
  • 36.0 mm (39)
  • 37.5 mm (95)
  • 38.0 mm (127)
  • 38.1 mm (396)
  • 39.0 mm (3)
  • 39.7 mm (3)
  • 40.0 mm (29)
  • 41.0 mm (2)
  • 41.276 mm (107)
  • 42.0 mm (3)
  • 44.45 mm (57)
  • 45.0 mm (97)
  • 45.801 mm (1)
  • 47.625 mm (42)
  • 47.7 mm (1)
  • 48.0 mm (39)
  • 50.0 mm (26)
  • 50.401 mm (1)
  • 50.801 mm (175)
  • 52.301 mm (1)
  • 53.975 mm (12)
  • 55.575 mm (1)
  • 56.0 mm (11)
  • 57.151 mm (194)
  • 60.0 mm (40)
  • 61.0 mm (1)
  • 63.5 mm (77)
  • 64.0 mm (2)
  • 66.675 mm (17)
  • 70.0 mm (1)
  • 75.0 mm (43)
  • 76.2 mm (165)
  • 79.351 mm (4)
  • 79.375 mm (14)
  • 80.0 mm (14)
  • 82.551 mm (33)
  • 88.9 mm (28)
  • 95.25 mm (14)
  • 100.0 mm (13)
  • 101.601 mm (84)
  • 104.775 mm (5)
  • 114.301 mm (27)
  • 125.0 mm (13)
  • 127.0 mm (40)
  • 139.701 mm (19)
  • 152.4 mm (19)
  • 165.101 mm (9)
Cutting Length Min до Cutting Length Max