Предложения по продукции

Product Family suggestions

успешно добавлено в корзину
Показать корзину

Уведомления

Отметить все как прочитанные

Фрезы со сменными режущими пластинами

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3938)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3493)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3602)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3602)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3605)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3688)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3831)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3831)
  • M Stainless Steel (3816)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3816)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3814)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3814)
  • K Cast Iron (3539)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3538)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3533)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3503)
  • N Non-Ferrous Materials (1986)
    • N1
      Wrought Aluminum
      (1986)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1955)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1955)
  • S High-Temp Alloys (3651)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3260)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3263)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3296)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3551)
  • H Hardened Materials (2267)
    • H1
      Hardened Materials 44-48 HRC
      (2248)
    • H2
      Hardened Materials 48-55 HRC
      (344)
    • H3
      Hardened Materials 56-60 HRC
      (193)
Выбрать First Choice
  • BR (103)
  • CN (533)
  • DE (674)
  • GB (406)
  • IN (137)
  • SG (218)
  • US (559)
Applications
Applications
  • Chamfer Milling Chamfer Milling (435)
  • Countersinking Countersinking (14)
  • Drilling Drilling (50)
  • Face Milling Face Milling (2018)
  • Flat Bottom Drilling Flat Bottom Drilling (14)
  • ID Thread Turning ID Thread Turning (104)
  • Pocket Pocket (1076)
  • Pocket Helical Pocket Helical (941)
  • Pocket Milling Pocket Milling (1147)
  • Pocket Plunge Milling Pocket Plunge Milling (310)
  • Profile Milling Profile Milling (772)
  • Ramping Ramping (1129)
  • Shoulder Ball Nose Shoulder Ball Nose (404)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (263)
  • Shoulder Milling Shoulder Milling (1441)
  • Shoulder Roughing Shoulder Roughing (771)
  • Shoulder Square End Shoulder Square End (766)
  • Slot Ball Nose Slot Ball Nose (141)
  • Slot Milling Slot Milling (1187)
  • Slot Side Slot Side (444)
  • Slot Square End Slot Square End (553)
  • Slot T Slot T (30)
Cutting Diameter
Cutting Diameter
  • 0.197 in (2)
  • 0.224 in (2)
  • 0.237 in (4)
  • 0.25 in (3)
  • 0.281 in (2)
  • 0.315 in (11)
  • 0.347 in (4)
  • 0.351 in (4)
  • 0.375 in (6)
  • 0.38 in (3)
  • 0.394 in (20)
  • 0.46 in (3)
  • 0.472 in (3)
  • 0.473 in (20)
  • 0.487 in (3)
  • 0.5 in (13)
  • 0.512 in (4)
  • 0.528 in (4)
  • 0.591 in (12)
  • 0.606 in (7)
  • 0.625 in (19)
  • 0.63 in (39)
  • 0.632 in (4)
  • 0.709 in (3)
  • 0.738 in (3)
  • 0.747 in (4)
  • 0.75 in (44)
  • 0.778 in (9)
  • 0.787 in (64)
  • 0.828 in (3)
  • 0.856 in (4)
  • 0.866 in (10)
  • 0.868 in (4)
  • 0.87 in (4)
  • 0.875 in (3)
  • 0.906 in (4)
  • 0.984 in (75)
  • 1.0 in (81)
  • 1.024 in (3)
  • 1.028 in (11)
  • 1.053 in (3)
  • 1.102 in (11)
  • 1.106 in (4)
  • 1.181 in (9)
  • 1.25 in (62)
  • 1.252 in (9)
  • 1.26 in (96)
  • 1.276 in (3)
  • 1.323 in (3)
  • 1.339 in (4)
  • 1.366 in (4)
  • 1.37 in (4)
  • 1.379 in (5)
  • 1.417 in (3)
  • 1.469 in (3)
  • 1.496 in (9)
  • 1.5 in (62)
  • 1.528 in (8)
  • 1.534 in (3)
  • 1.575 in (84)
  • 1.606 in (3)
  • 1.655 in (7)
  • 1.75 in (3)
  • 1.85 in (5)
  • 1.967 in (3)
  • 1.969 in (75)
  • 1.98 in (3)
  • 2.0 in (91)
  • 2.008 in (8)
  • 2.028 in (3)
  • 2.047 in (3)
  • 2.085 in (3)
  • 2.126 in (5)
  • 2.37 in (4)
  • 2.48 in (86)
  • 2.5 in (65)
  • 2.52 in (5)
  • 2.528 in (5)
  • 2.677 in (7)
  • 3.0 in (104)
  • 3.15 in (102)
  • 3.281 in (3)
  • 3.307 in (5)
  • 3.37 in (4)
  • 3.465 in (4)
  • 3.528 in (4)
  • 3.938 in (94)
  • 4.0 in (92)
  • 4.25 in (3)
  • 4.291 in (3)
  • 4.921 in (102)
  • 5.0 in (74)
  • 6.0 in (63)
  • 6.299 in (89)
  • 7.875 in (54)
  • 8.0 in (38)
  • 9.843 in (36)
  • 10.0 in (28)
  • 12.0 in (18)
  • 12.403 in (19)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (2)
  • 5.7 mm (2)
  • 6.0 mm (4)
  • 6.351 mm (3)
  • 7.15 mm (2)
  • 7.601 mm (2)
  • 8.0 mm (11)
  • 8.8 mm (4)
  • 8.9 mm (4)
  • 9.525 mm (6)
  • 9.65 mm (3)
  • 10.0 mm (20)
  • 11.675 mm (3)
  • 11.976 mm (3)
  • 12.0 mm (20)
  • 12.375 mm (3)
  • 12.701 mm (13)
  • 13.0 mm (4)
  • 13.4 mm (4)
  • 15.0 mm (12)
  • 15.4 mm (7)
  • 15.875 mm (19)
  • 16.0 mm (39)
  • 16.05 mm (4)
  • 18.0 mm (3)
  • 18.75 mm (3)
  • 18.975 mm (4)
  • 19.05 mm (44)
  • 19.75 mm (9)
  • 20.0 mm (64)
  • 21.0 mm (3)
  • 21.75 mm (4)
  • 22.0 mm (10)
  • 22.05 mm (4)
  • 22.1 mm (4)
  • 22.225 mm (3)
  • 23.0 mm (4)
  • 25.0 mm (75)
  • 25.401 mm (81)
  • 26.0 mm (3)
  • 26.1 mm (11)
  • 26.75 mm (3)
  • 28.0 mm (11)
  • 28.1 mm (4)
  • 30.0 mm (9)
  • 31.75 mm (62)
  • 31.8 mm (9)
  • 32.0 mm (96)
  • 32.4 mm (3)
  • 33.6 mm (3)
  • 34.0 mm (4)
  • 34.7 mm (4)
  • 34.801 mm (4)
  • 35.0 mm (5)
  • 36.0 mm (3)
  • 37.301 mm (3)
  • 38.0 mm (9)
  • 38.1 mm (62)
  • 38.801 mm (8)
  • 40.0 mm (84)
  • 40.801 mm (3)
  • 42.0 mm (7)
  • 44.45 mm (3)
  • 47.0 mm (5)
  • 49.95 mm (3)
  • 50.0 mm (75)
  • 50.301 mm (3)
  • 50.801 mm (91)
  • 51.0 mm (8)
  • 51.5 mm (3)
  • 52.0 mm (3)
  • 52.95 mm (3)
  • 54.0 mm (5)
  • 60.2 mm (4)
  • 63.0 mm (86)
  • 63.5 mm (65)
  • 64.0 mm (5)
  • 64.2 mm (5)
  • 68.0 mm (7)
  • 76.2 mm (104)
  • 80.0 mm (102)
  • 83.301 mm (3)
  • 84.0 mm (5)
  • 85.601 mm (4)
  • 88.0 mm (4)
  • 89.601 mm (4)
  • 100.0 mm (94)
  • 101.601 mm (92)
  • 107.95 mm (3)
  • 109.0 mm (3)
  • 125.0 mm (102)
  • 127.0 mm (74)
  • 152.4 mm (63)
  • 160.0 mm (89)
  • 200.0 mm (54)
  • 203.201 mm (38)
  • 250.0 mm (36)
  • 254.0 mm (28)
  • 304.8 mm (18)
  • 315.0 mm (19)
Cutting Diameter Min до Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (3)
  • 12.701 mm (2)
  • 15.0 mm (6)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (12)
  • 20.0 mm (20)
  • 24.0 mm (2)
  • 25.0 mm (30)
  • 25.201 mm (2)
  • 25.401 mm (24)
  • 28.0 mm (2)
  • 30.0 mm (2)
  • 31.55 mm (3)
  • 31.75 mm (25)
  • 31.8 mm (3)
  • 32.0 mm (37)
  • 33.176 mm (5)
  • 33.575 mm (5)
  • 35.0 mm (13)
  • 37.9 mm (2)
  • 38.1 mm (34)
  • 38.15 mm (2)
  • 38.551 mm (2)
  • 39.926 mm (6)
  • 40.0 mm (26)
  • 40.176 mm (7)
  • 40.901 mm (2)
  • 41.1 mm (7)
  • 42.0 mm (8)
  • 44.45 mm (2)
  • 45.151 mm (2)
  • 45.975 mm (2)
  • 46.276 mm (2)
  • 46.35 mm (2)
  • 47.1 mm (2)
  • 48.0 mm (2)
  • 48.176 mm (2)
  • 48.95 mm (2)
  • 49.0 mm (6)
  • 50.0 mm (33)
  • 50.6 mm (2)
  • 50.651 mm (2)
  • 50.801 mm (32)
  • 51.0 mm (5)
  • 51.45 mm (2)
  • 51.801 mm (4)
  • 52.0 mm (17)
  • 53.95 mm (3)
  • 56.35 mm (2)
  • 58.151 mm (3)
  • 58.95 mm (3)
  • 63.0 mm (34)
  • 63.5 mm (20)
  • 63.875 mm (6)
  • 66.0 mm (19)
  • 71.15 mm (3)
  • 71.65 mm (3)
  • 74.0 mm (3)
  • 74.3 mm (3)
  • 74.5 mm (3)
  • 76.2 mm (26)
  • 76.801 mm (6)
  • 80.0 mm (26)
  • 84.351 mm (3)
  • 87.2 mm (3)
  • 88.15 mm (3)
  • 88.65 mm (5)
  • 88.7 mm (4)
  • 91.0 mm (3)
  • 91.2 mm (3)
  • 93.75 mm (6)
  • 100.0 mm (19)
  • 101.601 mm (19)
  • 108.15 mm (3)
  • 109.75 mm (3)
  • 110.226 mm (4)
  • 110.976 mm (3)
  • 112.7 mm (3)
  • 113.7 mm (4)
  • 125.0 mm (15)
  • 127.0 mm (11)
  • 133.15 mm (3)
  • 135.15 mm (3)
  • 135.625 mm (5)
  • 136.0 mm (3)
  • 137.951 mm (3)
  • 138.675 mm (4)
  • 152.4 mm (9)
  • 160.0 mm (11)
  • 161.025 mm (5)
  • 163.375 mm (3)
  • 170.976 mm (3)
  • 173.65 mm (4)
  • 200.0 mm (4)
  • 203.201 mm (3)
  • 211.826 mm (3)
  • 262.625 mm (4)
  • 289.35 mm (3)
  • 313.425 mm (5)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.473 in (3)
  • 0.5 in (2)
  • 0.591 in (6)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (12)
  • 0.787 in (20)
  • 0.946 in (2)
  • 0.984 in (30)
  • 0.992 in (2)
  • 1.0 in (24)
  • 1.102 in (2)
  • 1.181 in (2)
  • 1.242 in (3)
  • 1.25 in (25)
  • 1.252 in (4)
  • 1.26 in (37)
  • 1.306 in (5)
  • 1.322 in (5)
  • 1.379 in (13)
  • 1.492 in (2)
  • 1.5 in (34)
  • 1.502 in (2)
  • 1.518 in (2)
  • 1.572 in (6)
  • 1.575 in (26)
  • 1.582 in (7)
  • 1.61 in (2)
  • 1.618 in (7)
  • 1.655 in (8)
  • 1.75 in (2)
  • 1.778 in (2)
  • 1.81 in (2)
  • 1.822 in (2)
  • 1.825 in (2)
  • 1.854 in (2)
  • 1.891 in (2)
  • 1.897 in (2)
  • 1.927 in (2)
  • 1.929 in (6)
  • 1.969 in (33)
  • 1.992 in (2)
  • 1.994 in (2)
  • 2.0 in (32)
  • 2.008 in (5)
  • 2.027 in (2)
  • 2.039 in (4)
  • 2.047 in (17)
  • 2.124 in (3)
  • 2.219 in (2)
  • 2.289 in (3)
  • 2.321 in (3)
  • 2.48 in (34)
  • 2.5 in (20)
  • 2.515 in (6)
  • 2.598 in (19)
  • 2.801 in (3)
  • 2.821 in (3)
  • 2.914 in (3)
  • 2.926 in (3)
  • 2.934 in (3)
  • 3.0 in (26)
  • 3.024 in (6)
  • 3.15 in (26)
  • 3.321 in (3)
  • 3.434 in (3)
  • 3.47 in (3)
  • 3.49 in (5)
  • 3.492 in (4)
  • 3.583 in (3)
  • 3.591 in (3)
  • 3.692 in (6)
  • 3.938 in (19)
  • 4.0 in (19)
  • 4.258 in (3)
  • 4.321 in (3)
  • 4.34 in (4)
  • 4.369 in (3)
  • 4.437 in (3)
  • 4.476 in (4)
  • 4.921 in (15)
  • 5.0 in (11)
  • 5.242 in (3)
  • 5.321 in (3)
  • 5.34 in (5)
  • 5.354 in (3)
  • 5.431 in (3)
  • 5.46 in (4)
  • 6.0 in (9)
  • 6.299 in (11)
  • 6.34 in (5)
  • 6.432 in (3)
  • 6.731 in (3)
  • 6.837 in (4)
  • 7.875 in (4)
  • 8.0 in (3)
  • 8.34 in (3)
  • 10.34 in (4)
  • 11.392 in (3)
  • 12.34 in (5)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.851 mm (5)
  • 0.9 mm (21)
  • 1.0 mm (32)
  • 1.026 mm (15)
  • 1.1 mm (17)
  • 1.5 mm (94)
  • 1.6 mm (8)
  • 1.625 mm (10)
  • 1.651 mm (8)
  • 2.2 mm (20)
  • 2.5 mm (75)
  • 3.0 mm (55)
  • 3.176 mm (8)
  • 3.2 mm (12)
  • 3.225 mm (44)
  • 3.5 mm (103)
  • 3.95 mm (19)
  • 4.0 mm (25)
  • 4.3 mm (22)
  • 4.5 mm (44)
  • 4.601 mm (5)
  • 4.75 mm (10)
  • 4.775 mm (4)
  • 4.95 mm (7)
  • 5.0 mm (135)
  • 5.075 mm (3)
  • 5.5 mm (61)
  • 5.9 mm (29)
  • 6.0 mm (158)
  • 6.2 mm (7)
  • 6.325 mm (15)
  • 6.351 mm (43)
  • 6.5 mm (20)
  • 6.551 mm (5)
  • 6.575 mm (13)
  • 6.601 mm (40)
  • 7.101 mm (5)
  • 7.625 mm (9)
  • 7.926 mm (6)
  • 8.0 mm (112)
  • 8.5 mm (4)
  • 8.625 mm (6)
  • 9.0 mm (6)
  • 9.05 mm (6)
  • 9.076 mm (6)
  • 9.1 mm (12)
  • 9.125 mm (16)
  • 9.15 mm (41)
  • 9.175 mm (14)
  • 9.5 mm (36)
  • 9.525 mm (32)
  • 9.75 mm (4)
  • 9.875 mm (15)
  • 9.925 mm (4)
  • 9.951 mm (18)
  • 10.0 mm (26)
  • 10.025 mm (18)
  • 10.05 mm (12)
  • 10.076 mm (7)
  • 10.101 mm (10)
  • 11.0 mm (95)
  • 11.701 mm (22)
  • 11.951 mm (4)
  • 12.125 mm (4)
  • 12.15 mm (24)
  • 12.5 mm (5)
  • 12.701 mm (16)
  • 14.0 mm (28)
  • 14.101 mm (6)
  • 14.3 mm (11)
  • 14.4 mm (9)
  • 14.476 mm (6)
  • 14.5 mm (9)
  • 14.601 mm (16)
  • 14.726 mm (6)
  • 15.5 mm (73)
  • 15.726 mm (6)
  • 15.826 mm (5)
  • 16.0 mm (49)
  • 16.401 mm (6)
  • 17.151 mm (15)
  • 17.401 mm (20)
  • 17.5 mm (4)
  • 17.6 mm (5)
  • 17.7 mm (7)
  • 17.901 mm (4)
  • 18.0 mm (47)
  • 19.0 mm (7)
  • 20.651 mm (12)
  • 21.401 mm (9)
  • 22.0 mm (8)
  • 25.0 mm (8)
  • 25.451 mm (13)
  • 28.0 mm (8)
  • 32.0 mm (8)
  • 36.0 mm (8)
  • 42.0 mm (4)
  • 44.325 mm (4)
  • 51.0 mm (4)
  • 77.051 mm (4)
Cutting Length Min до Cutting Length Max