Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

Kennametal At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart

Керамические фрезы

Выбрать фильтры
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (55)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (55)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (55)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (10)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
    • N7
      MMC's (1)
  • S High-Temp Alloys (71)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (71)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (71)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (71)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC (18)
  • C CFRP Materials (1)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (1)
Applications
Applications
  • Face Milling Face Milling (46)
  • Pocket Pocket (23)
  • Pocket Milling Pocket Milling (23)
  • Profile Milling Profile Milling (32)
  • Ramping Ramping (23)
  • Shoulder Ball Nose Shoulder Ball Nose (27)
  • Shoulder Milling Shoulder Milling (33)
  • Shoulder Roughing Shoulder Roughing (20)
  • Slot Ball Nose Slot Ball Nose (19)
  • Slot Milling Slot Milling (33)
Cutting Diameter
Cutting Diameter
  • 0.375 in (1)
  • 0.38 in (1)
  • 0.414 in (2)
  • 0.5 in (1)
  • 0.537 in (2)
  • 0.61 in (2)
  • 0.625 in (1)
  • 0.626 in (1)
  • 0.75 in (1)
  • 0.761 in (2)
  • 0.766 in (1)
  • 0.771 in (1)
  • 1.0 in (1)
  • 1.01 in (1)
  • 1.075 in (2)
  • 1.081 in (1)
  • 1.469 in (3)
  • 1.473 in (1)
  • 1.5 in (2)
  • 1.502 in (1)
  • 1.506 in (1)
  • 1.98 in (3)
  • 2.0 in (3)
  • 2.003 in (1)
  • 2.499 in (1)
  • 2.5 in (2)
  • 2.501 in (1)
  • 2.65 in (2)
  • 2.653 in (1)
  • 3.438 in (1)
  • 3.498 in (1)
  • 4.421 in (1)
  • 5.799 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (1)
  • 9.65 mm (1)
  • 10.5 mm (2)
  • 12.701 mm (1)
  • 13.65 mm (2)
  • 15.5 mm (2)
  • 15.875 mm (1)
  • 15.9 mm (1)
  • 19.05 mm (1)
  • 19.326 mm (2)
  • 19.451 mm (1)
  • 19.576 mm (1)
  • 25.401 mm (1)
  • 25.651 mm (1)
  • 27.3 mm (2)
  • 27.451 mm (1)
  • 37.301 mm (3)
  • 37.426 mm (1)
  • 38.1 mm (2)
  • 38.125 mm (1)
  • 38.225 mm (1)
  • 50.301 mm (3)
  • 50.801 mm (3)
  • 50.875 mm (1)
  • 63.475 mm (1)
  • 63.5 mm (2)
  • 63.526 mm (1)
  • 67.3 mm (2)
  • 67.375 mm (1)
  • 87.301 mm (1)
  • 88.851 mm (1)
  • 112.301 mm (1)
  • 147.3 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (4)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 31.75 mm (3)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 50.0 mm (4)
  • 50.801 mm (4)
  • 63.0 mm (3)
  • 63.5 mm (4)
  • 76.2 mm (4)
  • 80.0 mm (3)
  • 100.0 mm (1)
  • 101.601 mm (1)
  • 125.0 mm (1)
  • 160.0 mm (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.75 in (1)
  • 0.787 in (4)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.25 in (3)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (3)
  • 1.969 in (4)
  • 2.0 in (4)
  • 2.48 in (3)
  • 2.5 in (4)
  • 3.0 in (4)
  • 3.15 in (3)
  • 3.938 in (1)
  • 4.0 in (1)
  • 4.921 in (1)
  • 6.299 in (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.176 mm (5)
  • 4.75 mm (6)
  • 6.0 mm (6)
  • 6.325 mm (15)
  • 6.351 mm (15)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.125 in (5)
  • 0.187 in (6)
  • 0.237 in (6)
  • 0.249 in (15)
  • 0.25 in (15)
Cutting Length Min до Cutting Length Max
Reach
Reach
  • 0.933 in (1)
  • 0.945 in (1)
  • 1.022 in (1)
  • 1.024 in (1)
  • 1.181 in (2)
  • 1.192 in (1)
  • 1.22 in (2)
  • 1.25 in (1)
  • 1.379 in (1)
  • 1.5 in (1)
  • 1.536 in (1)
  • 1.556 in (1)
  • 1.61 in (1)
  • 1.75 in (4)
  • 1.772 in (6)
  • 1.929 in (1)
  • 1.969 in (8)
  • 2.0 in (9)
  • 2.48 in (2)
  • 3.11 in (1)
  • 3.5 in (1)
Reach Min до Reach Max
Reach
Reach
  • 23.701 mm (1)
  • 23.975 mm (1)
  • 25.925 mm (1)
  • 26.0 mm (1)
  • 30.0 mm (2)
  • 30.276 mm (1)
  • 31.0 mm (2)
  • 31.75 mm (1)
  • 35.0 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (1)
  • 39.526 mm (1)
  • 40.901 mm (1)
  • 44.45 mm (4)
  • 45.0 mm (6)
  • 49.0 mm (1)
  • 50.0 mm (8)
  • 50.801 mm (9)
  • 63.0 mm (2)
  • 79.0 mm (1)
  • 88.9 mm (1)
Reach Min до Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (47)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (22)
  • B-Cutter Retention Screw (5)
  • Screw-On Connection (6)
  • Straight-Cylindrical (14)
Number of Flutes
Number of Flutes
  • 11 (1)
  • 2 (4)
  • 3 (17)
  • 4 (9)
  • 5 (4)
  • 6 (6)
  • 7 (1)
  • 8 (2)
  • 9 (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (35)
  • 2.0 (37)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.75 in (4)
  • 1.772 in (5)
  • 1.969 in (9)
  • 2.0 in (9)
  • 2.116 in (1)
  • 2.244 in (1)
  • 2.465 in (1)
  • 2.48 in (2)
  • 2.736 in (1)
  • 2.95 in (1)
  • 2.953 in (1)
  • 3.2 in (1)
  • 3.228 in (2)
  • 3.781 in (1)
  • 3.801 in (1)
  • 4.0 in (2)
  • 4.331 in (3)
  • 5.5 in (2)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 44.45 mm (4)
  • 45.0 mm (5)
  • 50.0 mm (9)
  • 50.801 mm (9)
  • 53.75 mm (1)
  • 57.0 mm (1)
  • 62.6 mm (1)
  • 63.0 mm (2)
  • 69.5 mm (1)
  • 74.925 mm (1)
  • 75.0 mm (1)
  • 81.275 mm (1)
  • 82.0 mm (2)
  • 96.0 mm (1)
  • 96.525 mm (1)
  • 101.601 mm (2)
  • 110.0 mm (3)
  • 139.701 mm (2)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.125 in (7)
  • 0.188 in (11)
  • 0.25 in (54)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 3.176 mm (7)
  • 4.775 mm (11)
  • 6.351 mm (54)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (1)
  • KY1525 (12)
  • KY1540 (26)
  • KY2100 (22)
  • KY3500 (10)
  • KY4300 (13)
  • KY4400 (1)
  • KYHS10 (23)
  • KYK10 (10)
  • KYK25 (10)
  • KYS25 (12)
  • KYS30 (56)
  • KYSM10 (23)
  • KYSP30 (42)
Hand Of Tool
Hand Of Tool
  • R (47)
Wiper Insert
Wiper Insert
  • N (25)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.0 (1)
  • 1.95 (1)
  • 2.0 (2)
  • 2.5 (1)
  • 2.87 (1)
  • 3.0 (2)
  • 4.2 (1)
  • 4.233 (1)
  • 4.25 (2)
  • 8.0 (4)
  • 10.0 (3)
  • 12.0 (1)
  • 13.0 (2)
  • 14.0 (1)
Maximum Ramp Angle Min до Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.709 in (2)
  • 0.906 in (1)
  • 0.921 in (1)
  • 1.196 in (1)
  • 1.22 in (1)
Neck Diameter Min до Neck Diameter Max
Neck Diameter
Neck Diameter
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (2)
  • 23.0 mm (1)
  • 23.401 mm (1)
  • 30.375 mm (1)
  • 31.0 mm (1)
Neck Diameter Min до Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • R-ROUND (25)
Insert IC Size
Insert IC Size
  • 6.351 mm (2)
  • 9.525 mm (5)
  • 12.701 mm (18)
Insert IC Size Min до Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (2)
  • 0.375 in (5)
  • 0.5 in (18)
Insert IC Size Min до Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GN (4)
Cutting Tool Material
Cutting Tool Material
  • C A (4)
  • C N (20)
  • H W (1)
Tolerance Class
Tolerance Class
  • G (25)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (14)
  • SCREW-ON (6)
  • SHELL MILL (27)
Back-End Diameter
Back-End Diameter
  • 15.875 mm (1)
  • 16.0 mm (3)
  • 18.0 mm (2)
  • 19.05 mm (9)
  • 20.0 mm (2)
  • 21.0 mm (2)
  • 22.0 mm (6)
  • 25.0 mm (1)
  • 25.401 mm (5)
  • 27.0 mm (3)
  • 29.0 mm (2)
  • 31.75 mm (4)
  • 32.0 mm (4)
  • 38.1 mm (1)
  • 40.0 mm (2)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.625 in (1)
  • 0.63 in (3)
  • 0.709 in (2)
  • 0.75 in (9)
  • 0.787 in (2)
  • 0.828 in (2)
  • 0.866 in (6)
  • 0.984 in (1)
  • 1.0 in (5)
  • 1.063 in (3)
  • 1.143 in (2)
  • 1.25 in (4)
  • 1.26 in (4)
  • 1.5 in (1)
  • 1.575 in (2)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""

Керамические фрезы • RN

(37) Керамические фрезы • RN

Керамические фрезы • RP

(35) Керамические фрезы • RP
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

Models

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину
Показать корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?