Резьбонарезание

Выбрать фильтры
Filters
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2722)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (2687)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (2687)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (2644)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (2543)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1599)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1778)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1584)
  • M Stainless Steel (2645)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (2645)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1776)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (2489)
  • K Cast Iron (2450)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1699)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (2444)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1693)
  • N Non-Ferrous Materials (835)
    • N1
      Wrought Aluminum (722)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (731)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (511)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (722)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (493)
    • N6
      Carbon, Graphite Composites, CFRP (487)
    • N7
      MMC's (449)
  • S High-Temp Alloys (1929)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1681)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1660)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1660)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1574)
  • H Hardened Materials (710)
    • H1
      Hardened Materials 44-48 HRC (703)
    • H2
      Hardened Materials 48-55 HRC (178)
    • H3
      Hardened Materials 56-60 HRC (109)
    • H4
      Hardened Materials >60 HRC (109)
Выбрать First Choice
  • BR (23)
  • CN (100)
  • DE (241)
  • GB (116)
  • IN (20)
  • SG (90)
  • US (354)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Countersinking Countersinking (21)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Drilling Drilling (6)
  • Face Grooving Face Grooving (191)
  • Facing Facing (4)
  • Grooving Grooving (134)
  • ID Grooving ID Grooving (69)
  • ID Thread Turning ID Thread Turning (888)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (981)
  • Pipe Thread Pipe Thread (88)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Tapping Blind Hole Tapping Blind Hole (1051)
  • Tapping Through Hole Tapping Through Hole (773)
  • Thread Milling Thread Milling (179)
  • Threading Threading (2157)
  • Turning Turning (4)
Cutting Diameter
Cutting Diameter
  • 0.095 in (1)
  • 0.124 in (2)
  • 0.157 in (1)
  • 0.159 in (1)
  • 0.185 in (1)
  • 0.189 in (3)
  • 0.232 in (1)
  • 0.237 in (2)
  • 0.242 in (1)
  • 0.256 in (2)
  • 0.264 in (1)
  • 0.301 in (1)
  • 0.315 in (2)
  • 0.323 in (2)
  • 0.354 in (5)
  • 0.39 in (3)
  • 0.394 in (4)
  • 0.399 in (1)
  • 0.409 in (1)
  • 0.41 in (1)
  • 0.449 in (1)
  • 0.45 in (2)
  • 0.453 in (3)
  • 0.457 in (2)
  • 0.465 in (1)
  • 0.473 in (2)
  • 0.477 in (1)
  • 0.516 in (1)
  • 0.531 in (1)
  • 0.535 in (1)
  • 0.551 in (3)
  • 0.579 in (1)
  • 0.58 in (1)
  • 0.581 in (1)
  • 0.591 in (2)
  • 0.595 in (1)
  • 0.608 in (2)
  • 0.61 in (3)
  • 0.63 in (4)
  • 0.669 in (5)
  • 0.67 in (2)
  • 0.677 in (1)
  • 0.681 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.79 in (1)
  • 0.799 in (1)
  • 0.802 in (1)
  • 0.807 in (2)
  • 0.811 in (4)
  • 0.835 in (2)
  • 0.866 in (5)
  • 0.87 in (5)
  • 0.906 in (1)
  • 0.909 in (2)
  • 0.917 in (1)
  • 0.965 in (1)
  • 0.969 in (1)
  • 0.984 in (1)
  • 1.02 in (2)
  • 1.024 in (4)
  • 1.039 in (2)
  • 1.18 in (3)
  • 1.181 in (13)
  • 1.22 in (4)
  • 1.358 in (1)
  • 1.379 in (1)
  • 1.417 in (4)
  • 1.421 in (2)
  • 1.437 in (1)
  • 1.441 in (2)
  • 1.457 in (2)
  • 1.46 in (1)
  • 1.478 in (1)
  • 1.539 in (1)
  • 1.651 in (1)
  • 1.655 in (4)
  • 1.69 in (1)
  • 1.732 in (2)
  • 1.811 in (1)
  • 1.891 in (2)
  • 1.929 in (2)
  • 2.047 in (2)
  • 2.09 in (1)
  • 2.091 in (1)
  • 2.205 in (1)
  • 2.283 in (1)
  • 2.319 in (2)
  • 2.48 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.401 mm (1)
  • 3.151 mm (2)
  • 4.0 mm (1)
  • 4.05 mm (1)
  • 4.7 mm (1)
  • 4.801 mm (3)
  • 5.9 mm (1)
  • 6.0 mm (2)
  • 6.15 mm (1)
  • 6.5 mm (2)
  • 6.7 mm (1)
  • 7.65 mm (1)
  • 8.0 mm (2)
  • 8.201 mm (2)
  • 9.0 mm (5)
  • 9.9 mm (3)
  • 10.0 mm (4)
  • 10.125 mm (1)
  • 10.351 mm (1)
  • 10.4 mm (1)
  • 11.4 mm (1)
  • 11.425 mm (2)
  • 11.5 mm (3)
  • 11.601 mm (2)
  • 11.8 mm (1)
  • 12.0 mm (2)
  • 12.101 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (1)
  • 14.0 mm (3)
  • 14.701 mm (1)
  • 14.726 mm (1)
  • 14.75 mm (1)
  • 15.0 mm (2)
  • 15.101 mm (1)
  • 15.451 mm (2)
  • 15.5 mm (3)
  • 16.0 mm (4)
  • 17.0 mm (5)
  • 17.026 mm (2)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 20.076 mm (1)
  • 20.3 mm (1)
  • 20.375 mm (1)
  • 20.5 mm (2)
  • 20.6 mm (4)
  • 21.201 mm (2)
  • 22.0 mm (5)
  • 22.1 mm (5)
  • 23.0 mm (1)
  • 23.1 mm (2)
  • 23.3 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (4)
  • 26.401 mm (2)
  • 29.975 mm (3)
  • 30.0 mm (13)
  • 31.0 mm (4)
  • 34.5 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (4)
  • 36.1 mm (2)
  • 36.5 mm (1)
  • 36.6 mm (2)
  • 37.0 mm (2)
  • 37.075 mm (1)
  • 37.551 mm (1)
  • 39.1 mm (1)
  • 41.901 mm (1)
  • 42.0 mm (4)
  • 42.926 mm (1)
  • 44.0 mm (2)
  • 46.0 mm (1)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 52.0 mm (2)
  • 53.075 mm (1)
  • 53.1 mm (1)
  • 56.0 mm (1)
  • 58.0 mm (1)
  • 58.901 mm (2)
  • 63.0 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.9 mm (1)
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 17.026 mm (1)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 27.951 mm (1)
  • 28.0 mm (1)
  • 36.1 mm (1)
  • 39.075 mm (1)
  • 45.0 mm (1)
  • 49.0 mm (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.547 in (1)
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.67 in (1)
  • 0.866 in (1)
  • 0.87 in (1)
  • 1.1 in (1)
  • 1.102 in (1)
  • 1.421 in (1)
  • 1.538 in (1)
  • 1.772 in (1)
  • 1.929 in (1)
Maximum Cutting Diameter Min до Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 6.0 mm (7)
  • 6.25 mm (1)
  • 7.0 mm (30)
  • 7.9 mm (21)
  • 8.0 mm (40)
  • 8.1 mm (9)
  • 8.201 mm (1)
  • 8.725 mm (1)
  • 9.0 mm (13)
  • 9.1 mm (21)
  • 9.5 mm (1)
  • 9.701 mm (46)
  • 9.9 mm (8)
  • 10.0 mm (114)
  • 10.101 mm (1)
  • 10.4 mm (4)
  • 10.5 mm (2)
  • 10.775 mm (1)
  • 10.9 mm (1)
  • 10.925 mm (4)
  • 11.0 mm (19)
  • 11.101 mm (45)
  • 11.201 mm (6)
  • 11.5 mm (2)
  • 11.601 mm (11)
  • 11.701 mm (1)
  • 11.8 mm (9)
  • 11.9 mm (3)
  • 12.0 mm (74)
  • 12.101 mm (11)
  • 12.201 mm (5)
  • 12.351 mm (1)
  • 12.4 mm (41)
  • 12.5 mm (3)
  • 12.701 mm (47)
  • 13.0 mm (96)
  • 13.101 mm (2)
  • 13.201 mm (5)
  • 13.4 mm (13)
  • 14.0 mm (20)
  • 14.201 mm (20)
  • 14.8 mm (10)
  • 14.9 mm (3)
  • 15.0 mm (172)
  • 15.101 mm (32)
  • 15.201 mm (8)
  • 15.8 mm (2)
  • 16.0 mm (99)
  • 16.45 mm (1)
  • 16.825 mm (2)
  • 17.0 mm (10)
  • 17.3 mm (3)
  • 17.475 mm (3)
  • 17.5 mm (41)
  • 18.0 mm (87)
  • 18.7 mm (3)
  • 18.901 mm (2)
  • 19.0 mm (15)
  • 19.05 mm (9)
  • 19.1 mm (34)
  • 19.6 mm (34)
  • 20.0 mm (68)
  • 20.201 mm (1)
  • 20.451 mm (1)
  • 21.0 mm (33)
  • 21.1 mm (1)
  • 22.0 mm (22)
  • 22.1 mm (1)
  • 22.3 mm (8)
  • 22.401 mm (14)
  • 23.0 mm (10)
  • 23.1 mm (12)
  • 23.875 mm (1)
  • 23.901 mm (40)
  • 24.0 mm (35)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.0 mm (36)
  • 25.35 mm (1)
  • 25.401 mm (25)
  • 26.0 mm (1)
  • 26.201 mm (8)
  • 26.925 mm (5)
  • 27.0 mm (8)
  • 27.701 mm (41)
  • 28.0 mm (3)
  • 29.0 mm (1)
  • 29.151 mm (1)
  • 30.0 mm (29)
  • 31.0 mm (14)
  • 31.8 mm (2)
  • 32.0 mm (1)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 33.0 mm (1)
  • 34.0 mm (5)
  • 34.926 mm (7)
  • 35.0 mm (16)
  • 36.0 mm (4)
  • 36.7 mm (1)
  • 38.0 mm (1)
  • 38.1 mm (6)
  • 38.5 mm (2)
  • 40.0 mm (14)
  • 41.151 mm (2)
  • 42.0 mm (4)
  • 43.5 mm (4)
  • 44.45 mm (2)
  • 45.0 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (4)
  • 55.0 mm (1)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (4)
  • 0.237 in (7)
  • 0.246 in (1)
  • 0.276 in (30)
  • 0.311 in (21)
  • 0.315 in (40)
  • 0.319 in (9)
  • 0.323 in (1)
  • 0.345 in (1)
  • 0.354 in (13)
  • 0.358 in (21)
  • 0.374 in (1)
  • 0.382 in (46)
  • 0.39 in (8)
  • 0.394 in (114)
  • 0.398 in (1)
  • 0.41 in (4)
  • 0.414 in (2)
  • 0.424 in (1)
  • 0.429 in (1)
  • 0.43 in (4)
  • 0.433 in (19)
  • 0.437 in (45)
  • 0.441 in (6)
  • 0.453 in (2)
  • 0.457 in (11)
  • 0.461 in (1)
  • 0.465 in (9)
  • 0.47 in (3)
  • 0.473 in (74)
  • 0.477 in (11)
  • 0.48 in (5)
  • 0.486 in (1)
  • 0.488 in (41)
  • 0.492 in (3)
  • 0.5 in (47)
  • 0.512 in (96)
  • 0.516 in (2)
  • 0.52 in (5)
  • 0.528 in (13)
  • 0.551 in (20)
  • 0.559 in (20)
  • 0.583 in (10)
  • 0.587 in (3)
  • 0.591 in (172)
  • 0.595 in (32)
  • 0.598 in (8)
  • 0.622 in (2)
  • 0.63 in (99)
  • 0.648 in (1)
  • 0.662 in (2)
  • 0.669 in (10)
  • 0.681 in (3)
  • 0.689 in (3)
  • 0.69 in (41)
  • 0.709 in (87)
  • 0.736 in (3)
  • 0.744 in (2)
  • 0.748 in (15)
  • 0.75 in (9)
  • 0.752 in (34)
  • 0.772 in (34)
  • 0.787 in (68)
  • 0.795 in (1)
  • 0.805 in (1)
  • 0.828 in (33)
  • 0.832 in (1)
  • 0.866 in (22)
  • 0.87 in (1)
  • 0.878 in (8)
  • 0.882 in (14)
  • 0.906 in (10)
  • 0.909 in (12)
  • 0.941 in (1)
  • 0.942 in (40)
  • 0.946 in (35)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.984 in (36)
  • 0.998 in (1)
  • 1.0 in (25)
  • 1.024 in (1)
  • 1.032 in (8)
  • 1.06 in (5)
  • 1.063 in (8)
  • 1.091 in (41)