successfully added to cart
View Cart
Фрезерование уступов • Концевая фреза • Хвостовик Weldon
Фрезерование уступов • Концевая фреза • Хвостовик Weldon
Фрезерование уступов • Концевая фреза • Хвостовик Weldon
Фрезерование уступов • Концевая фреза • Хвостовик Weldon

Mill 4-15™ • Концевая фреза • Хвостовик Weldon • Дюймовая система

Фрезерование уступов • Концевая фреза • Хвостовик Weldon

Features and benefits

  • Фреза для обработки уступов.

  • Превосходное качество обработанных плоскостей и стенок.

  • Возможность обработки уступов с углом 90°. Бесступенчатое решение для выполнения многоэтапных операций.

  • Возможность работы с подачами на зуб до 0,610″ Глубина резания: 15,5 мм.

  • Эффективный внутренний подвод СОЖ точно к режущей кромке.

Uses and application

  • Face MillingFace Milling
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
  • Milling - Through CoolantMilling - Through Coolant

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
Applications
Applications
  • Face Milling Face Milling (6)
  • Shoulder Milling Shoulder Milling (6)
  • Shoulder Roughing Shoulder Roughing (6)
  • Shoulder Square End Shoulder Square End (6)
Cutting Diameter
Cutting Diameter
  • 25.4 mm (2)
  • 31.75 mm (2)
  • 38.1 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 in (2)
  • 1.25 in (2)
  • 1.5 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.61 in (4)
  • 0.6102 in (2)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 44.45 mm (2)
  • 57.15 mm (4)
Reach Min to Reach Max
Reach
Reach
  • 1.75 in (2)
  • 2.25 in (4)
Reach Min to Reach Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.4 mm (6)
  • 0.8 mm (6)
  • 1.2 mm (6)
  • 1.6 mm (6)
  • 1.62 mm (6)
  • 2.0 mm (6)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0157 in (6)
  • 0.016 in (6)
  • 0.031 in (6)
  • 0.0313 in (6)
  • 0.047 in (6)
  • 0.063 in (6)
  • 0.064 in (6)
  • 0.078 in (6)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC422M (6)
  • KC520M (6)
  • KC522M (6)
  • KC725M (6)
  • KCK15 (6)
  • KCK20B (6)
  • KCPK30 (6)
  • KCPM20 (6)
  • KCPM40 (6)
  • KCSM30 (6)
  • KCSM40 (6)
frontEnd
Neck Diameter
Neck Diameter
  • 18.5 mm (1)
  • 25.0 mm (1)
  • 29.87 mm (1)
  • 31.0 mm (2)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 0.728 in (1)
  • 0.984 in (1)
  • 1.176 in (1)
  • 1.22 in (2)
Neck Diameter Min to Neck Diameter Max
backEnd
Back-End Diameter
Back-End Diameter
  • 0.75 in (1)
  • 1.0 in (2)
  • 1.25 in (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 19.05 mm (1)
  • 25.4 mm (2)
  • 31.75 mm (3)
Back-End Diameter Min to Back-End Diameter Max
other
Number of Inserts
Number of Inserts
  • 2.0 (2)
  • 3.0 (3)
  • 4.0 (1)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 96.01 mm (1)
  • 102.36 mm (1)
  • 115.02 mm (1)
  • 115.06 mm (1)
  • 115.062 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 3.78 in (1)
  • 4.03 in (1)
  • 4.53 in (4)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 44.45 mm (2)
  • 57.15 mm (4)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 1.75 in (2)
  • 2.25 in (4)
Head Length [L2] Min to Head Length [L2] Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 6 of 6 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Pounds Max RPM
5544368 M4D150L1504W125L225 M4D150L1504W125L225   38.1000 1.500 31.75 1.25 115.0620 4.530 57.1500 2.250 15.5000 .6100 4 1.38 19500
    List price:
    $453.56 /each.
    Your price::
    Qty
    5544367 M4D125L1503W100L225 M4D125L1503W100L225   31.7500 1.250 25.4 1.0 115.0600 4.530 57.1500 2.250 15.5000 .6102 3 0.87 22100
      List price:
      $376.47 /each.
      Your price::
      Qty
      5544366 M4D100L1502W100L175 M4D100L1502W100L175   25.4000 1.000 25.4 1.0 102.3600 4.030 44.4500 1.750 15.5000 .6100 2 0.73 26300
        List price:
        $354.38 /each.
        Your price::
        Qty
        5568069 M4D150L1503W125L225 M4D150L1503W125L225   38.1000 1.500 31.75 1.25 115.0620 4.530 57.1500 2.250 15.5000 .6100 3 1.38 19500
          List price:
          $430.88 /each.
          Your price::
          Qty
          5568067 M4D100L1502W075L175 M4D100L1502W075L175   25.4000 1.000 19.05 .75 96.0100 3.780 44.4500 1.750 15.5000 .6100 2 0.40 19500
            List price:
            $361.27 /each.
            Your price::
            Qty
            5568068 M4D125L1503W125L225 M4D125L1503W125L225   31.7500 1.250 31.75 1.25 115.0200 4.530 57.1500 2.250 15.5000 .6102 3 1.28 22100
              List price:
              $368.94 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              We have found the following CAD Drawings

              Select the files you are looking for and download them all at once

              You should be logged to see your dashboard information
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart