Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

Kennametal At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart

Расточные оправки

Выбрать фильтры
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (42)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (42)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (42)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (42)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (42)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (42)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (42)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (42)
  • M Stainless Steel (42)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (42)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (42)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (42)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (42)
  • N Non-Ferrous Materials (42)
    • N1
      Wrought Aluminum (42)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (42)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (41)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
    • N6
      Carbon, Graphite Composites, CFRP (42)
    • N7
      MMC's (41)
  • S High-Temp Alloys (42)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (42)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (42)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (42)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (42)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC (16)
    • H2
      Hardened Materials 48-55 HRC (16)
  • C CFRP Materials (42)
    • C1
      CFRP, CFRP / CFRP (42)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (41)
Applications
Applications
  • Face Grooving Face Grooving (7)
  • Facing Facing (6)
  • ID Facing ID Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (42)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (41)
  • Lightly Interrupted Cut (42)
  • Smooth Cut (42)
  • Varying Depth of Cut (42)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (1)
  • 95.0 (28)
  • 100.0 (1)
  • 107.5 (8)
  • 117.5 (4)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Over All Length [L]
Over All Length [L]
  • 5.906 in (4)
  • 7.087 in (2)
  • 7.263 in (2)
  • 7.875 in (2)
  • 8.0 in (2)
  • 8.055 in (1)
  • 8.132 in (2)
  • 8.15 in (1)
  • 9.843 in (4)
  • 10.0 in (7)
  • 10.063 in (2)
  • 10.095 in (2)
  • 11.811 in (2)
  • 12.0 in (5)
  • 13.781 in (1)
  • 14.0 in (2)
  • 14.07 in (1)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 150.0 mm (4)
  • 180.0 mm (2)
  • 184.451 mm (2)
  • 200.0 mm (2)
  • 203.201 mm (2)
  • 204.601 mm (1)
  • 206.55 mm (2)
  • 207.0 mm (1)
  • 250.0 mm (4)
  • 254.0 mm (7)
  • 255.601 mm (2)
  • 256.401 mm (2)
  • 300.0 mm (2)
  • 304.8 mm (5)
  • 350.0 mm (1)
  • 355.6 mm (2)
  • 357.375 mm (1)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.005 in (33)
  • 0.008 in (42)
  • 0.016 in (42)
  • 0.02 in (33)
  • 0.031 in (42)
  • 0.039 in (33)
  • 0.047 in (8)
  • 0.063 in (8)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.125 mm (33)
  • 0.2 mm (42)
  • 0.4 mm (42)
  • 0.5 mm (33)
  • 0.8 mm (42)
  • 1.0 mm (33)
  • 1.201 mm (8)
  • 1.6 mm (8)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (8)
  • K313 (41)
  • K420 (33)
  • K68 (41)
  • K8735 (8)
  • KB1345 (17)
  • KC250 (41)
  • KC5010 (42)
  • KC5025 (42)
  • KC5410 (41)
  • KC720 (8)
  • KC730 (41)
  • KC7310 (41)
  • KC732 (41)
  • KC8050 (42)
  • KC810 (42)
  • KC850 (42)
  • KC9025 (41)
  • KC910 (41)
  • KC9105 (24)
  • KC9110 (42)
  • KC9120 (8)
  • KC9125 (42)
  • KC9225 (42)
  • KC9315 (41)
  • KC935 (41)
  • KC950 (41)
  • KCD25 (8)
  • KCK05 (8)
  • KCK15B (8)
  • KCM15B (25)
  • KCM25 (42)
  • KCP05 (42)
  • KCP10 (42)
  • KCP10B (41)
  • KCP25 (42)
  • KCP25B (41)
  • KCP25C (42)
  • KCS10B (8)
  • KCU10 (42)
  • KCU10B (42)
  • KCU25 (42)
  • KCU25B (42)
  • KD050 (41)
  • KD081 (8)
  • KD100 (41)
  • KD120 (41)
  • KD1425 (41)
  • KS15 (8)
  • KT125 (41)
  • KT150 (41)
  • KT175 (33)
  • KT315 (42)
Hand Of Tool
Hand Of Tool
  • L (16)
  • R (26)
F Dimension
F Dimension
  • 8.875 mm (2)
  • 9.0 mm (2)
  • 9.4 mm (2)
  • 9.525 mm (3)
  • 10.875 mm (1)
  • 11.0 mm (2)
  • 12.576 mm (4)
  • 13.0 mm (2)
  • 14.275 mm (6)
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 17.0 mm (1)
  • 18.925 mm (2)
  • 19.05 mm (3)
  • 19.425 mm (1)
  • 22.0 mm (4)
  • 27.0 mm (1)
  • 28.451 mm (1)
  • 31.75 mm (1)
  • 35.0 mm (1)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.35 in (2)
  • 0.354 in (2)
  • 0.37 in (2)
  • 0.375 in (3)
  • 0.428 in (1)
  • 0.433 in (2)
  • 0.495 in (4)
  • 0.512 in (2)
  • 0.562 in (6)
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.669 in (1)
  • 0.745 in (2)
  • 0.75 in (3)
  • 0.765 in (1)
  • 0.866 in (4)
  • 1.063 in (1)
  • 1.12 in (1)
  • 1.25 in (1)
  • 1.379 in (1)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 16.0 mm (4)
  • 16.776 mm (2)
  • 17.026 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 22.85 mm (4)
  • 24.901 mm (6)
  • 25.0 mm (2)
  • 26.925 mm (1)
  • 32.0 mm (3)
  • 33.025 mm (5)
  • 40.0 mm (4)
  • 45.051 mm (1)
  • 46.475 mm (1)
  • 50.0 mm (1)
  • 53.85 mm (1)
  • 63.0 mm (1)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.63 in (4)
  • 0.66 in (2)
  • 0.67 in (2)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.9 in (4)
  • 0.98 in (6)
  • 0.984 in (2)
  • 1.06 in (1)
  • 1.26 in (3)
  • 1.3 in (5)
  • 1.575 in (4)
  • 1.774 in (1)
  • 1.83 in (1)
  • 1.969 in (1)
  • 2.12 in (1)
  • 2.48 in (1)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (26)
  • E (13)
  • P (2)
  • S (1)
Maximum Bore Depth
Maximum Bore Depth
  • 1.891 in (2)
  • 2.0 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.835 in (2)
  • 3.0 in (8)
  • 3.15 in (2)
  • 3.75 in (2)
  • 3.781 in (1)
  • 3.938 in (3)
  • 4.0 in (5)
  • 4.5 in (2)
  • 4.992 in (1)
  • 5.0 in (1)
  • 5.039 in (4)
  • 6.0 in (1)
  • 6.299 in (1)
  • 7.875 in (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 48.0 mm (2)
  • 50.801 mm (2)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 72.0 mm (2)
  • 76.2 mm (8)
  • 80.0 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (1)
  • 100.0 mm (3)
  • 101.601 mm (5)
  • 114.301 mm (2)
  • 126.801 mm (1)
  • 127.0 mm (1)
  • 128.0 mm (4)
  • 152.4 mm (1)
  • 160.0 mm (1)
  • 200.0 mm (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (10)
  • S (32)
frontEnd
Insert Shape
Insert Shape
  • K-PARALLELOGRAM 55 (4)
  • N/K-PARALLELOGRAM 55 (29)
  • V-DIAMOND/RHOMBIC 35 (9)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.116 in (2)
  • 0.121 in (1)
  • 0.185 in (1)
  • 0.244 in (1)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.95 mm (2)
  • 3.075 mm (1)
  • 4.7 mm (1)
  • 6.2 mm (1)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (41)
  • B L (41)
  • D P (41)
  • H T (42)
  • H W (42)
backEnd
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.701 mm (5)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (5)
  • 31.701 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (4)
  • 38.1 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (1)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (4)
  • 0.5 in (5)
  • 0.625 in (4)
  • 0.63 in (3)
  • 0.75 in (7)
  • 0.787 in (2)
  • 0.984 in (3)
  • 1.0 in (5)
  • 1.248 in (1)
  • 1.25 in (1)
  • 1.26 in (4)
  • 1.5 in (1)
  • 1.575 in (1)
  • 1.969 in (1)
Back-End Diameter Min до Back-End Diameter Max
Shank Height
Shank Height
  • 0.449 in (2)
  • 0.606 in (1)
  • 0.939 in (3)
  • 1.214 in (4)
  • 1.53 in (1)
  • 1.848 in (1)
Shank Height Min до Shank Height Max
Shank Height
Shank Height
  • 11.4 mm (2)
  • 15.4 mm (1)
  • 23.826 mm (3)
  • 30.826 mm (4)
  • 38.825 mm (1)
  • 46.95 mm (1)
Shank Height Min до Shank Height Max
Shank Width
Shank Width
  • 0.864 in (3)
  • 1.141 in (4)
  • 1.455 in (1)
  • 1.848 in (1)
Shank Width Min до Shank Width Max
Shank Width
Shank Width
  • 21.951 mm (3)
  • 28.951 mm (4)
  • 36.95 mm (1)
  • 46.95 mm (1)
Shank Width Min до Shank Width Max
No filters matching ""

A-NKLC -5°

(6) A-NKLC -5°

A-NKXC 85°

(2) A-NKXC 85°

A-NKQC -17.5°

(6) A-NKQC -17.5°

A-NVLC -5°

(2) A-NVLC -5°

A-NKLC 95°

(9) A-NKLC 95°

A-NVQC 107,5°

(1) A-NVQC 107,5°

A-NVQB 107,5°

(1) A-NVQB 107,5°

A-NVOC 117,5°

(4) A-NVOC 117,5°

E-NEL -5°

(1) E-NEL -5°

E-NKLC -5°

(6) E-NKLC -5°

A-NVJC -3°

(1) A-NVJC -3°

E-NKLC 95°

(3) E-NKLC 95°
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

Models

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину
Показать корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?