Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$177.73 /каждый

Ваша цена::

Кол-во

Configure

Сверла KMH • Без внутреннего подвода СОЖ

SDS

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

Name: B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
SKU: 6358996
Rating: 0 (0 reviews)

Сверла KMH • Без внутреннего подвода СОЖ

Метрическая система

Дюймовая система

SAP Material Number	6358996
ISO Catalog Number	B941A10500
ANSI Catalog Number	B941A10500
Grade	KCH10
[D1] Drill Diameter M	10.5 mm
[D1] Drill Diameter M	.4134 in
[L] Overall Length	102 mm
[L] Overall Length	4.02 in
[L3] Flute Length	55 mm
[L3] Flute Length	2.17 in
[L4] Maximum Drilling Depth	35 mm
[L4] Maximum Drilling Depth	1.38 in
[L5] Drill Point Length	1.88 mm
[L5] Drill Point Length	.074 in
[LS] Shank Length	45 mm
[LS] Shank Length	1.771 in
[D] Adapter / Shank / Bore Diameter	12 mm
[D] Adapter / Shank / Bore Diameter	.4724 in

Посмотреть все варианты продукции

Использование и область применения

Drilling
Drilling: Stacked Plates
Corner Style: Corner Chamfer
Tool Dimensions: 2flute/2margin/no cool
DIN number 6535
DIN number 6537
Drilling - No Coolant
Flood Coolant: Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 15°

Обрабатываемый материал

P Steel

K Cast Iron

H Hardened Materials

Характеристики и преимущества

The B94_ drill series without through coolant is specifically designed to machine hardened and surface hardened materials, using flood coolant. With its 145° point angle, it is also perfectly suited as pilot drill for the B95_ drill series with through coolant and 140° point for deeper applications.

KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.

Special flute design with strong web to increase the strength of the drill in tough applications with short chips. B94_ series with 15° helix angle to maximize stability in applications above 54 HRC.

Grade KCH10 on B94_ series consists of a special fine grain carbide substrate with higher hardness. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Tolerance • Metric
nominal size range	D1 tolerance m7	D tolerance h6
3–6	0,004/0,016	0,000/-0,008
6–10	0,006/0,021	0,000/-0,009
10–18	0,007/0,025	0,000/-0,011
18–25,4	0,008/0,029	0,000/-0,013

Tolerance • Inch
nominal size range	D1 tolerance m7	D tolerance h6
.1181 .2362	.0002/.0006	.0000/-.0003
.2362 .3937	.0002/.0008	.0000/-.0004
.3937 .7087	.0003/.0010	.0000/-.0004
.7087 1.0000	.0003/.0011	.0000/-.0005

Material Group			<="" td="">		<="" td="" />

Material Group		Cutting Speed vc			Inch
		Range SFM			Recommended Feed Rate per Rev
		Min	Starting Value	Max		1/8 .125	3/16 .188	1/4 .250	5/16 .313	3/8 .375	1/2 .500	5/8 .625	3/4 .750
P	4	160	230	330	IPR	.0024-.0059	.0031-.0067	.0047-.0091	.0055-.0110	.0067-.0130	.0075-.0150	.0091-.0185	.0114-.0232
	5	130	160	230	IPR	.0031–.0063	.0039–.0079	.0047–.0094	.0063–.0110	.0079–.0126	.0094–.0142	.0110–.0173	.0126–.0205
	6	100	130	200	IPR	.0020-.0028	.0024-.0039	.0031-.0055	.0039-.0071	.0047-.0087	.0055-.0094	.0071-.0126	.0091-.0161
K	1	260	430	490	IPR	.0043-.0087	.0047-.0094	.0063-.0122	.0079-.0150	.0091-.0173	.0098-.0193	.0122-.0024	.0150-.0185
	2	230	360	330	IPR	.0039–.0067	.0047–.0075	.0063–.0098	.0079–.0122	.0091–.0142	.0098–.0157	.0122–.0189	.0150–.0236
	3	260	360	390	IPR	.0028-.0059	.0035-.0075	.0047-.0098	.0055-.0118	.0067-.0138	.0075-.0157	.0098-.0189	.0118-.0236
H	1	70	100	130	IPR	.0012-.0024	.0016-.0031	.0024-.0039	.0031-.0047	.0035-.0051	.0039-.0055	.0047-.0063	.0055-.0071
	2	50	100	130	IPR	.0008–.0016	.0012–.0024	.0020–.0031	.0028–.0039	.0031–.0043	.0035–.0047	.0039–.0055	.0043–.0063
	3	50	80	110	IPR	.0008-.0016	.0008-.0020	.0016-.0028	.0024-.0035	.0028-.0039	.0031-.0043	.0035-.0051	.0039-.0059
	4	50	70	100	IPR	.0008–.0016	.0012–.0024	.0020–.0031	.0028–.0039	.0031–.0043	.0035–.0047	.0039–.0055	.0043–.0063

Material Group

<="" td="">

<="" td="" />

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate per Rev

Min

Starting Value

Max

3,0

4,0

6,0

8,0

10,0

12,0

16,0

20,0

100

mm/r

0,06–0,15

0,08–0,17

0,12–0,23

0,14–0,28

0,17–0,33

0,19–0,38

0,23–0,47

0,29–0,59

mm/r

0,08–0,16

0,10–0,20

0,12–0,24

0,16–0,28

0,20–0,32

0,24–0,36

0,28–0,44

0,32–0,52

mm/r

0,05–0,07

0,06–0,10

0,08–0,14

0,10–0,18

0,12–0,22

0,14–0,24

0,18–0,32

0,23–0,41

130

150

mm/r

0,11–0,22

0,12–0,24

0,16–0,31

0,20–0,38

0,23–0,44

0,25–0,49

0,31–0,06

0,38–0,47

110

100

mm/r

0,10–0,17

0,12–0,19

0,16–0,25

0,20–0,31

0,23–0,36

0,25–0,40

0,31–0,48

0,38–0,60

110

120

mm/r

0,07–0,15

0,09–0,19

0,12–0,25

0,14–0,30

0,17–0,35

0,19–0,40

0,25–0,48

0,30–0,60

mm/r

0,03–0,06

0,04–0,08

0,06–0,10

0,08–0,12

0,09–0,13

0,10–0,14

0,12–0,16

0,14–0,18

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

mm/r

0,02–0,04

0,02–0,05

0,04–0,07

0,06–0,09

0,07–0,10

0,08–0,11

0,09–0,13

0,10–0,15

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

<="" td="">

<="" td="" />

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate (f) by Diameter

Material Group

Min

Starting Value

Max

3,0

4,0

6,0

8,0

10,0

12,0

16,0

20,0

100

mm/r

0,06–0,15

0,08–0,17

0,12–0,23

0,14–0,28

0,17–0,33

0,19–0,38

0,23–0,47

0,29–0,59

mm/r

0,08–0,16

0,10–0,20

0,12–0,24

0,16–0,28

0,20–0,32

0,24–0,36

0,28–0,44

0,32–0,52

mm/r

0,05–0,07

0,06–0,10

0,08–0,14

0,10–0,18

0,12–0,22

0,14–0,24

0,18–0,32

0,23–0,41

130

150

mm/r

0,11–0,22

0,12–0,24

0,16–0,31

0,20–0,38

0,23–0,44

0,25–0,49

0,31–0,06

0,38–0,47

110

100

mm/r

0,10–0,17

0,12–0,19

0,16–0,25

0,20–0,31

0,23–0,36

0,25–0,40

0,31–0,48

0,38–0,60

110

120

mm/r

0,07–0,15

0,09–0,19

0,12–0,25

0,14–0,30

0,17–0,35

0,19–0,40

0,25–0,48

0,30–0,60

mm/r

0,03–0,06

0,04–0,08

0,06–0,10

0,08–0,12

0,09–0,13

0,10–0,14

0,12–0,16

0,14–0,18

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

mm/r

0,02–0,04

0,02–0,05

0,04–0,07

0,06–0,09

0,07–0,10

0,08–0,11

0,09–0,13

0,10–0,15

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

Сверла KMH • Без внутреннего подвода СОЖ

Использование и область применения

Обрабатываемый материал

Характеристики и преимущества

Со стороны станка

Со стороны заготовки

Предложения по продукции

Product Family suggestions

Send a Message

Уведомления

Send a Message

Sending to SolidCAM in progress...

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

Сверла KMH • Без внутреннего подвода СОЖ

Использование и область применения

Обрабатываемый материал

Характеристики и преимущества

Со стороны станка

Со стороны заготовки