Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$128.74 /каждый

Ваша цена::

Кол-во

Configure

SDS

B951A (~3 x D) • KCH15 • A-Shank • KMH Drills

Name: B951A (~3 x D) • KCH15 • A-Shank • KMH Drills
SKU: 6359011
Rating: 0 (0 reviews)

Сверла KMH • Внутренний подвод СОЖ

Метрическая система

Дюймовая система

SAP Material Number	6359011
ISO Catalog Number	B951A03175
ANSI Catalog Number	B951A03175
Grade	KCH15
[D1] Drill Diameter M	3.175 mm
[D1] Drill Diameter M	.125 in
[L] Overall Length	62 mm
[L] Overall Length	2.44 in
[L3] Flute Length	20 mm
[L3] Flute Length	.79 in
[L4] Maximum Drilling Depth	14 mm
[L4] Maximum Drilling Depth	.55 in
[L5] Drill Point Length	0.65 mm
[L5] Drill Point Length	.0256 in
[LS] Shank Length	36 mm
[LS] Shank Length	1.417 in
[D] Adapter / Shank / Bore Diameter	6 mm
[D] Adapter / Shank / Bore Diameter	.2362 in

Посмотреть все варианты продукции

Использование и область применения

Drilling
Drilling: Stacked Plates
Corner Style: Corner Chamfer
Tool Dimensions: 2flute/2margin/coolant
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°

Обрабатываемый материал

P Steel

K Cast Iron

H Hardened Materials

Характеристики и преимущества

The all new KMH solid carbide drills are engineered for hard material applications up to 65 HRC. The B95_ drill series with through coolant and 140° point is designed for deeper applications.

KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.

Special flute design with strong web to increase the strength of the drill in tough applications with short chips. B95_ series with 30° helix angle to improve chip evacuation in higher length-to-diameter ratios.

KCH15 on B95_ with its higher toughness supports edge strength at increased rake angles, which are applied to improve chip evacuation in higher L/D ratios. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Tolerance • Metric
nominal size range	D1 tolerance m7	D tolerance h6
3–6	0,004/0,016	0,000/-0,008
6–10	0,006/0,021	0,000/-0,009
10–18	0,007/0,025	0,000/-0,011
18–25,4	0,008/0,029	0,000/-0,013

Tolerance • Inch
nominal size range	D1 tolerance m7	D tolerance h6
.1181 .2362	.0002/.0006	.0000/-.0003
.2362 .3937	.0002/.0008	.0000/-.0004
.3937 .7087	.0003/.0010	.0000/-.0004
.7087 1.0000	.0003/.0011	.0000/-.0005

Material Group

<="" td="">

<="" td="" />

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate per Rev

Min

Starting Value

Max

3,0

4,0

6,0

8,0

10,0

12,0

16,0

20,0

100

mm/r

0,06–0,15

0,08–0,17

0,12–0,23

0,14–0,28

0,17–0,33

0,19–0,38

0,23–0,47

0,29–0,59

mm/r

0,08–0,14

0,10–0,16

0,12–0,20

0,16–0,24

0,20–0,28

0,24–0,32

0,28–0,40

0,32–0,48

mm/r

0,05–0,08

0,06–0,10

0,08–0,14

0,10–0,18

0,13–0,22

0,14–0,24

0,18–0,32

0,23–0,41

130

170

mm/r

0,11–0,22

0,12–0,24

0,16–0,31

0,20–0,38

0,23–0,44

0,25–0,49

0,31–0,06

0,38–0,47

110

120

mm/r

0,10–0,17

0,12–0,19

0,16–0,25

0,20–0,31

0,23–0,36

0,25–0,40

0,31–0,48

0,38–0,60

110

130

mm/r

0,07–0,15

0,09–0,19

0,12–0,25

0,14–0,30

0,17–0,35

0,19–0,40

0,25–0,48

0,30–0,60

mm/r

0,03–0,06

0,04–0,08

0,06–0,10

0,08–0,12

0,09–0,13

0,10–0,14

0,12–0,16

0,14–0,18

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

mm/r

0,02–0,04

0,02–0,05

0,04–0,07

0,06–0,09

0,07–0,10

0,08–0,11

0,09–0,13

0,10–0,15

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

Material Group			<="" td="">		<="" td="" />

Material Group		Cutting Speed vc			Inch
		Range SFM			Recommended Feed Rate per Rev
		Min	Starting Value	Max		1/8 .125	3/16 .188	1/4 .250	5/16 .313	3/8 .375	1/2 .500	5/8 .625	3/4 .750
P	4	160	230	330	IPR	.0024-.0059	.0031-.0067	.0047-.0091	.0055-.0110	.0067-.0130	.0075-.0150	.0091-.0185	.0114-.0232
	5	160	200	260	IPR	.0031–.0055	.0039–.0079	.0047–.0079	.0063–.0094	.0079–.0110	.0094–.0126	.0110–.0157	.0126–.0189
	6	130	160	230	IPR	.0020-.0031	.0024-.0039	.0031-.0055	.0039-.0071	.0051-.0087	.0055-.0094	.0071-.0126	.0091-.0161
K	1	260	430	560	IPR	.0043-.0087	.0047-.0094	.0063-.0122	.0079-.0150	.0091-.0173	.0098-.0193	.0122-.0024	.0150-.0185
	2	300	360	390	IPR	.0039–.0067	.0047–.0075	.0063–.0098	.0079–.0122	.0091–.0142	.0098–.0157	.0122–.0189	.0150–.0236
	3	260	360	430	IPR	.0028-.0059	.0035-.0075	.0047-.0098	.0055-.0118	.0067-.0138	.0075-.0157	.0098-.0189	.0118-.0236
H	1	70	110	150	IPR	.0012-.0024	.0016-.0031	.0024-.0039	.0031-.0047	.0035-.0051	.0039-.0055	.0047-.0063	.0055-.0071
	2	50	100	150	IPR	.0008–.0016	.0012–.0024	.0020–.0031	.0028–.0039	.0031–.0043	.0035–.0047	.0039–.0055	.0043–.0063
	3	50	80	130	IPR	.0008-.0016	.0008-.0020	.0016-.0028	.0024-.0035	.0028-.0039	.0031-.0043	.0035-.0051	.0039-.0059
	4	50	70	110	IPR	.0008–.0016	.0012–.0024	.0020–.0031	.0028–.0039	.0031–.0043	.0035–.0047	.0039–.0055	.0043–.0063

<="" td="">

<="" td="" />

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate per Rev

Material Group

Min

Starting Value

Max

3,0

4,0

6,0

8,0

10,0

12,0

16,0

20,0

100

mm/r

0,06–0,15

0,08–0,17

0,12–0,23

0,14–0,28

0,17–0,33

0,19–0,38

0,23–0,47

0,29–0,59

mm/r

0,08–0,14

0,10–0,16

0,12–0,20

0,16–0,24

0,20–0,28

0,24–0,32

0,28–0,40

0,32–0,48

mm/r

0,05–0,08

0,06–0,10

0,08–0,14

0,10–0,18

0,13–0,22

0,14–0,24

0,18–0,32

0,23–0,41

130

170

mm/r

0,11–0,22

0,12–0,24

0,16–0,31

0,20–0,38

0,23–0,44

0,25–0,49

0,31–0,06

0,38–0,47

110

120

mm/r

0,10–0,17

0,12–0,19

0,16–0,25

0,20–0,31

0,23–0,36

0,25–0,40

0,31–0,48

0,38–0,60

110

130

mm/r

0,07–0,15

0,09–0,19

0,12–0,25

0,14–0,30

0,17–0,35

0,19–0,40

0,25–0,48

0,30–0,60

mm/r

0,03–0,06

0,04–0,08

0,06–0,10

0,08–0,12

0,09–0,13

0,10–0,14

0,12–0,16

0,14–0,18

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

mm/r

0,02–0,04

0,02–0,05

0,04–0,07

0,06–0,09

0,07–0,10

0,08–0,11

0,09–0,13

0,10–0,15

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution

B951A (~3 x D) • KCH15 • A-Shank • KMH Drills

Сверла KMH • Внутренний подвод СОЖ

Использование и область применения

Обрабатываемый материал

Характеристики и преимущества

Со стороны станка

Со стороны заготовки

Предложения по продукции

Product Family suggestions

Send a Message

Уведомления

Send a Message

Sending to SolidCAM in progress...

B951A (~3 x D) • KCH15 • A-Shank • KMH Drills

Сверла KMH • Внутренний подвод СОЖ

Использование и область применения

Обрабатываемый материал

Характеристики и преимущества

Со стороны станка

Со стороны заготовки