Фреза для прорезания Т-образных пазов • Дюйм

Name: Фреза для прорезания Т-образных пазов • Дюйм
SKU: 3577133
Rating: 0 (0 reviews)

Метрическая система

Дюймовая система

SAP Material Number	3577133
ISO Catalog Number	KTMS32S32SD08H
ANSI Catalog Number	KTMS32S32SD08H
[D1] Effective Cutting Diameter	32 mm
[D1] Effective Cutting Diameter	1.259 in
[D] Adapter / Shank / Bore Diameter	32 mm
[D] Adapter / Shank / Bore Diameter	1.259 in
[D3] Neck Diameter	15.5 mm
[D3] Neck Diameter	.6102 in
[L] Overall Length	120 mm
[L] Overall Length	4.724 in
[L1] Gage Length	120 mm
[L1] Gage Length	4.724 in
[L3] Usable Length	38 mm
[L3] Usable Length	1.496 in
[AP1MAX] 1st Maximum Cutting Depth	14 mm
[AP1MAX] 1st Maximum Cutting Depth	.5512 in
Number of Inserts	4
[Z] Number of Flutes	2
Gage Insert	SDMT080308EGG
Weight Pounds	1.32

P Steel

K Cast Iron

H Hardened Materials

Подачи в диапазоне 0,10–0,15 мм. Более низкие значения будут создавать вибрацию.

Со стороны станка

загрузка...

загрузка...

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.06..EGG	0.20	0.46	0.70	0.14	0.33	0.50	0.11	0.25	0.38	0.09	0.22	0.33	0.08	0.20	0.30	.06..EGG
.08..EGG	0.20	0.53	0.82	0.14	0.38	0.59	0.11	0.29	0.44	0.09	0.25	0.39	0.08	0.23	0.35	.08..EGG
.12..EGG	0.20	0.59	0.92	0.14	0.43	0.66	0.11	0.32	0.50	0.09	0.28	0.43	0.08	0.25	0.40	.12..EGG

Light Machining

General Purpose

Heavy Machining

	material type	catalog number	cutting conditions vc (m/min)	feed per tooth (mm)	Vs*
P	carbon steel/ alloy steel	KTMS21S25SD06H	120	0,10	Figure 1
		KTMS25S25SD06H	120	0,10	Figure 1
		KTMS32S32SD08H	100	0,10	Figure 1
		KTMS40S32SD12H	80	0,15	Figure 2
		KTMS50S32SD12H	not recommended due to frequent chattering
K	cast iron	KTMS21S25SD06H	120	0,12	Figure 1, 2, 3
		KTMS25S25SD06H	120	0,12	Figure 1, 2, 3
		KTMS32S32SD08H	120	0,12	Figure 1, 2, 3
		KTMS40S32SD12H	120	0,15	Figure 2,3
		KTMS50S32SD12H	120	0,15	Figure 3

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.06..EGG	0,20	0,46	0,70	0,14	0,33	0,50	0,11	0,25	0,38	0,09	0,22	0,33	0,08	0,20	0,30	.06..EGG
.08..EGG	0,20	0,53	0,82	0,14	0,38	0,59	0,11	0,29	0,44	0,09	0,25	0,39	0,08	0,23	0,35	.08..EGG
.12..EGG	0,20	0,59	0,92	0,14	0,43	0,66	0,11	0,32	0,50	0,09	0,28	0,43	0,08	0,25	0,40	.12..EGG