Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$731.24 /каждый

Ваша цена::

Кол-во

KenFeed™ 2X • Shell Mills • WOEJ09... • Inch

Name: KenFeed™ 2X • Shell Mills • WOEJ09... • Inch
SKU: 4109599
Rating: 0 (0 reviews)

Shell Mills • WOEJ09...

Метрическая система

Дюймовая система

SAP Material Number	4109599
ISO Catalog Number	KF2X250W0906S075L175
ANSI Catalog Number	KF2X250W0906S075L175
[D1MAX] Maximum Cutting Diameter	63.5 mm
[D1MAX] Maximum Cutting Diameter	2.5 in
[D1] Effective Cutting Diameter	47.35 mm
[D1] Effective Cutting Diameter	1.864 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D6] Hub Diameter	44 mm
[D6] Hub Diameter	1.732 in
[L] Overall Length	44.5 mm
[L] Overall Length	1.75 in
[AP1MAX] 1st Maximum Cutting Depth	1.5 mm
[AP1MAX] 1st Maximum Cutting Depth	.059 in
Number of Inserts	6
Max RPM	20000
Gage Insert	WOEJ090512__
Weight Pounds	1.22

Посмотреть все варианты продукции

Использование и область применения

Face Milling
Helical Milling
Plunge Milling
Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
Pocketing

Обрабатываемый материал

P Steel

M Stainless Steel

K Cast Iron

S High-Temp Alloys

H Hardened Materials

Характеристики и преимущества

Dramatically improves MRR using the latest milling strategies.

Engineered to run up to 0,1 IPT.

Ideal for pocketing, ramping, and helical interpolations. Z-plunge capabilities.

First choice for deep cavities or from 3 x D.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Material Group	Light Machining		General Purpose		Heavy Machining
	(Light geometry)				(Strong geometry)
	wear resistance		<="" td="">		toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P3–P4	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P5–P6	.S..GD	KCPK30	.S..GD	KC725M	.S..HD	KC725M
M1–M2	.S..GD	KC522M	.S..GD	KC725M	.S..HD	KC725M
M3	.S..GD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
K1–K2	.S..HD	KCK15	.S..HD	KCK15	.S..HD	KCK15
K3	.S..GD	KCPK30	.S..HD	KCK15	.S..HD	KCPK30
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.S..GD	KC522M	.S..GD	KC725M	.S..HD	KC725M
S3	.S..GD	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
S4	.S..GD	KC522M	.S..HD	KC522M	.S..HD	KC725M
H1	–	–	–	–	–	–

Recommended Starting Feeds [IPT]

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.S..GD	.045	.089	.141	.032	.063	.098	.024	.047	.072	.021	.040	.063	.019	.037	.057	.S..GD
.S..HD	.045	.109	.168	.032	.077	.116	.024	.057	.085	.021	.049	.074	.019	.045	.067	.S..HD

Light Machining

General Purpose

Heavy Machining

Рекомендуемая начальная скорость резания [м/мин]

Material Group		KC522M			KC725M			KCK15			KCPK30
P	1	1300	1130	1060	1030	900	840	–	–	–	1780	1560	1450
	2	1080	950	790	860	760	640	–	–	–	1100	1000	900
	3	1000	840	700	790	670	550	–	–	–	1000	900	820
	4	890	730	590	710	590	470	–	–	–	740	690	620
	5	730	660	590	590	530	470	–	–	–	1020	910	830
	6	650	490	400	520	400	310	–	–	–	620	540	–
M	1	800	710	650	670	590	540	–	–	–	820	720	620
	2	730	620	520	610	520	430	–	–	–	730	640	550
	3	550	480	370	460	400	310	–	–	–	570	520	460
K	1	900	820	720	–	–	–	1660	1510	1340	1160	1050	940
	2	710	640	590	–	–	–	1310	1170	1090	920	830	760
	3	590	530	480	–	–	–	1100	980	900	770	690	640
N	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
S	1	160	140	110	140	120	100	–	–	–	–	–	–
	2	160	140	110	140	120	100	–	–	–	–	–	–
	3	200	160	110	180	140	100	–	–	–	–	–	–
	4	280	200	140	240	180	120	–	–	–	–	–	–
H	1	470	360	280	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–

cutter type	catalog number	recommended ramping angle (for continuous ramping process)	max ramp angle when Ap max (not for continuous ramping process)	max ramp angle for 360° helical interpolation	min hole diameter (DH min)	max flat-bottom hole diameter (DH1 max)	max diameter (no flat bottom)
Screw-On	KF2X100W0902M12L138	3.5°	5.2°	3.1°	1.291	1.35	2.0
	KF2X125W0902M16L169	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X125W0903M16L169	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X150W0903M16L169	1.4°	2.1°	1.2°	2.310	2.37	3.0
	KF2X150W0904M16L169	1.4°	2.1°	1.2°	2.310	2.37	3.0
End Mills	KF2X100W0902C100L600	3.5°	5.2°	3.1°	1.291	1.35	2.0
	KF2X100W0902C100L800	3.5°	5.2°	3.1°	1.291	1.35	2.0
	KF2X125W0903C125L600	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X125W0903C125L800	1.9°	2.8°	1.7°	1.813	1.87	2.5
	KF2X150W0903C125L600	1.4°	2.1°	1.2°	2.310	2.37	3.0
	KF2X150W0903C125L800	1.4°	2.1°	1.2°	2.310	2.37	3.0
Face Mills	KF2X150W0904S050L157	1.4°	2.1°	1.2°	2.310	2.37	3.0
	KF2X200W0905S075L157	1.0°	1.4°	0.8°	3.307	3.37	4.0
	KF2X200W0906S075L157	1.0°	1.4°	0.8°	3.307	3.37	4.0
	KF2X250W0906S075L175	0.7°	1.1°	0.6°	4.305	4.36	5.0
	KF2X300W0907S100L175	0.6°	1.0°	0.5°	5.303	5.36	6.0
	KF2X300W0907S125L200	0.6°	1.0°	0.5°	5.303	5.36	6.0

Rt	Wt	t
.110	.312	.045

Максимальные значения для врезания под углом и винтовой интерполяции при обработке сплошного материала • Дюймовая система

cutter type	catalog number	recommended ramping angle (for continuous ramping process)	max ramp angle when Ap max (not for continuous ramping process)	max ramp angle for 360° helical interpolation	min hole diameter (DH min)	max flat-bottom hole diameter (DH1 max)	max diameter (no flat bottom)
Screw-On	KF2X2X25Z02M12WO09	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X32Z03M16WO09	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X35Z03M16WO09	1.6°	2.4°	1.4°	46,8	54,0	70
	KF2X42Z04M16WO09	1.2°	1.9°	0.8°	68,7	75,9	84
End Mills	KF2X25Z02A25WO09L140	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X25Z02A25WO09L200	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X25Z02A25WO09L300	3.6°	5.4°	3.1°	26,5	33,7	50
	KF2X28Z02A25WO09L200	3.1°	4.6°	2.5°	31,6	38,8	56
	KF2X32Z03A32WO09L150	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X32Z03A32WO09L200	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X32Z03A32WO09L300	1.8°	2.7°	1.7°	41,2	48,4	64
	KF2X35Z03A32WO09L200	1.6°	2.4°	1.4°	46,8	54,0	70
Face Mills	KF2X40Z04WO09	1.3°	2.0°	1.2°	56,4	63,6	80
	KF2X50Z05WO09	1.0°	1.5°	0.8°	76,7	83,9	100
	KF2X52Z05WO09	1.0°	1.4°	0.8°	80,7	87,9	104
	KF2X63Z05S22WO09	0.8°	1.2°	0.6°	102,7	109,9	126
	KF2X63Z05WO09	0.8°	1.2°	0.6°	102,7	109,9	126
	KF2X66Z06S22WO09	0.7°	1.1°	0.5°	108,7	115,9	132
	KF2X66Z06WO09	0.7°	1.1°	0.5°	108,7	115,9	132
	KF2X80Z07WO09	0.6°	0.9°	0.4°	136,6	143,8	160

Максимальные значения для врезания под углом и винтовой интерполяции при обработке сплошного материала • Дюймовая система

diameter	max ramp angle	max ramp angle for 360° helical interpolation	max plunge depth	min hole diameter (DH min)	max flat-bottom hole diameter (DH1 max)	max diameter (no flat bottom)
1.50	5.5°	1.93°	0.076	1.90	2.22	3.00
2.00	4.4°	1.18°	0.076	2.86	3.22	4.00
2.50	3.0°	0.85°	0.076	3.85	4.22	5.00
3.00	2.3°	0.67°	0.076	4.84	5.21	6.00
4.00	1.6°	0.47°	0.076	6.84	7.21	8.00
5.00	1.2°	0.36°	0.076	8.84	9.21	10.00

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution