Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$1,076.35 /каждый

Ваша цена::

Кол-во

KSOM • Shell Mills • Fine Pitch • Wedge Clamping • Inch

Name: KSOM • Shell Mills • Fine Pitch • Wedge Clamping • Inch
SKU: 2252796
Rating: 0 (0 reviews)

Shell Mills

Метрическая система

Дюймовая система

SAP Material Number	2252796
ISO Catalog Number	KFSR400OF6445M5
ANSI Catalog Number	KFSR400OF6445M5
[D1] Effective Cutting Diameter	101.6 mm
[D1] Effective Cutting Diameter	4 in
[D1MAX] Maximum Cutting Diameter	112.5 mm
[D1MAX] Maximum Cutting Diameter	4.431 in
[D] Adapter / Shank / Bore Diameter	31.75 mm
[D] Adapter / Shank / Bore Diameter	1.25 in
[D6] Hub Diameter	73.15 mm
[D6] Hub Diameter	2.88 in
[L] Overall Length	44.45 mm
[L] Overall Length	1.75 in
[AP1MAX] 1st Maximum Cutting Depth	5 mm
[AP1MAX] 1st Maximum Cutting Depth	.1969 in
Number of Inserts	8
Weight Pounds	3.1
Max RPM	6300

Посмотреть все варианты продукции

Использование и область применения

Face Milling
Milling - Through Coolant
Milling - Side and Face

Обрабатываемый материал

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Характеристики и преимущества

Super soft cutting.

Eight cutting edges.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Recommended Starting Feeds [IPT]

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.F..LNJ	.007	.027	.048	.005	.019	.035	.004	.015	.026	.003	.013	.022	.003	.012	.021	.F..LNJ
.E..LB	.014	.029	.047	.010	.021	.034	.007	.016	.025	.006	.014	.022	.006	.013	.020	.E..LB
.S..LB	.014	.029	.053	.010	.021	.038	.007	.016	.028	.006	.014	.025	.006	.012	.022	.S..LB
.E..GB	.014	.034	.055	.010	.025	.039	.007	.018	.029	.006	.016	.026	.006	.015	.023	.E..GB
.S..HB	.014	.034	.059	.010	.025	.042	.007	.018	.031	.006	.016	.027	.006	.015	.025	.S..HB

Light Machining

General Purpose

Heavy Machining

Recommended Starting Speeds [SFM]

Material Group		KC410M			KC520M			KC522M			KC725M			KCK15			KCPK30
P	1	–	–	–	–	–	–	1300	1130	1060	1030	900	840	–	–	–	1780	1560	1450
	2	–	–	–	–	–	–	1080	950	790	860	760	640	–	–	–	1100	1000	900
	3	–	–	–	–	–	–	1000	840	700	790	670	550	–	–	–	1000	900	820
	4	–	–	–	–	–	–	890	730	590	710	590	470	–	–	–	740	690	620
	5	–	–	–	–	–	–	730	660	590	590	530	470	–	–	–	1020	910	830
	6	–	–	–	–	–	–	650	490	400	520	400	310	–	–	–	620	540	–
M	1	–	–	–	–	–	–	800	710	650	670	590	540	–	–	–	820	720	620
	2	–	–	–	–	–	–	730	620	520	610	520	430	–	–	–	730	640	550
	3	–	–	–	–	–	–	550	480	370	460	400	310	–	–	–	570	520	460
K	1	–	–	–	1060	960	850	900	820	720	–	–	–	1660	1510	1340	1160	1050	940
	2	–	–	–	830	740	700	710	640	590	–	–	–	1310	1170	1090	920	830	760
	3	–	–	–	700	620	560	590	530	480	–	–	–	1100	980	900	770	690	640
N	1–2	4790	4260	3920	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	4260	3920	3600	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	160	140	110	140	120	100	–	–	–	–	–	–
	2	–	–	–	–	–	–	160	140	110	140	120	100	–	–	–	–	–	–
	3	–	–	–	–	–	–	200	160	110	180	140	100	–	–	–	–	–	–
	4	–	–	–	–	–	–	280	200	140	240	180	120	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

D1 mm	D1 max mm	Ap max	ramping angle (°)	ramping length mm
63	74,2	11,7	5,5	121,5
80	91,1	11,7	4,0	167,3
100	111,0	11,7	3,0	223,2
125	135,9	11,7	2,3	291,3
160	170,8	11,7	1,7	394,2

max DOC Ap	mm	chipload (fz)
Ap1 max	5,0	1 x fz
Ap2 max	11,7	0,6 x fz

max plunging depth	mm
Ap1 max	4,2

D1 mm	D1 max mm	hole diameter		Ap/rev mm
D1 mm	D1 max mm	min mm	max mm	Ap/rev mm
63	74,2	122,7	145,0	6,3
80	91,1	156,6	178,0	6,3
100	111,0	196,5	218,7	6,3
125	135,9	246,4	268,7	6,3
160	170,8	316,3	338,6	6,3

D1 inch	D1 max inch	Ap max inch	ramping angle (°)	ramping length inch
2.50	2.94	.46	5.5	4.78
3.00	3.44	.46	4.2	6.27
4.00	4.43	.46	2.9	9.09
5.00	5.43	.46	2.2	11.99
6.00	6.43	.46	1.8	14.65

max DOC Ap	inch	chipload (fz)
Ap1 max	.20	1 x fz
Ap2 max	.46	0,6 x fz

max plunging depth	inch
Ap1 max	.17

		hole diameter
D1 inch	D1 max inch	min inch	max inch	Ap/Rev inch
2.50	2.94	4.872	5.748	.248
3.00	3.44	5.868	6.744	.248
4.00	4.43	7.863	8.739	.248
5.00	5.43	9.859	10.736	.248
6.00	6.43	11.857	12.733	.248

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.F..LNJ	0,17	0,67	1,20	0,12	0,49	0,86	0,09	0,36	0,64	0,08	0,32	0,56	0,07	0,29	0,51	.F..LNJ
.E..LB	0,34	0,75	1,20	0,25	0,54	0,86	0,19	0,40	0,64	0,16	0,35	0,56	0,15	0,32	0,51	.E..LB
.S..LB	0,34	0,73	1,33	0,25	0,53	0,96	0,19	0,39	0,71	0,16	0,34	0,62	0,15	0,32	0,57	.S..LB
.E..GB	0,34	0,87	1,40	0,25	0,62	1,00	0,19	0,47	0,74	0,16	0,41	0,65	0,15	0,37	0,59	.E..GB
.S..HB	0,34	0,87	1,49	0,25	0,62	1,07	0,19	0,47	0,79	0,16	0,41	0,69	0,15	0,37	0,63	.S..HB

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution