Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$2,118.05 /каждый

Ваша цена::

Кол-во

Slot milling cutter for multiple materials

KVNS™ A2™ • Arbor Mount • Inch

Name: KVNS™ A2™ • Arbor Mount • Inch
SKU: 1247785
Rating: 0 (0 reviews)

Slot milling cutter for multiple materials

Метрическая система

Дюймовая система

SAP Material Number	1247785
ISO Catalog Number	KVNS102360D
ANSI Catalog Number	KVNS102360D
[BM] Cutting Width Minimum	6 mm
[BM] Cutting Width Minimum	.236 in
[D1] Effective Cutting Diameter	254 mm
[D1] Effective Cutting Diameter	10 in
[CDX] Radial Maximum Depth of Cut	82.55 mm
[CDX] Radial Maximum Depth of Cut	3.25 in
[D] Adapter / Shank / Bore Diameter	50.8 mm
[D] Adapter / Shank / Bore Diameter	2 in
[THUB] Hub Thickness	5.4 mm
[THUB] Hub Thickness	.2126 in
Number of Inserts	24
Weight Kilograms	1.76
Gage Insert	OD_6236__
Max RPM	1300

Посмотреть все варианты продукции

Использование и область применения

Slotting: Side with AE/AP dimensions

Обрабатываемый материал

P Steel

M Stainless Steel

K Cast Iron

S High-Temp Alloys

Характеристики и преимущества

Self-clamping insert seat with fixed stop.

Excellent for all flat-bottom slotting and cut-off operations.

Two drive rings required for each cutter body. They must be ordered separately, and in pairs of two.

For cutter diameters 8" and 10" support rings are optional (instead of drive rings). Support rings also must be ordered separately, and in pairs of two.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Recommended Starting Feeds [IPT]

KVNS™ A2™ Series • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.S..GD	0.009	0.017	0.026	0.007	0.013	0.019	0.005	0.009	0.014	0.004	0.008	0.012	0.004	0.008	0.011
.S..GB	0.009	0.017	0.028	0.007	0.013	0.020	0.005	0.009	0.015	0.004	0.008	0.013	0.004	0.008	0.012
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Recommended Starting Speeds [SFM]

KVNS™ A2™ Series • Recommended Starting Speed [SFM]
Grade		KCPK30			KMF
Chip Thickness hex Inch		Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min
P	1	1495	1295	1215	–	–	–
	2	920	835	755	–	–	–
	3	835	755	675	–	–	–
	4	740	605	525	–	–	–
	5	625	560	490	–	–	–
	6	525	445	360	–	–	–
M	1	675	605	510	–	–	–
	2	605	525	460	–	–	–
	3	475	425	375	–	–	–
K	1	970	870	785	–	–	–
	2	770	690	625	–	–	–
	3	640	575	525	–	–	–
N	1	–	–	–	1100	980	890
	2	–	–	–	1100	980	890
	3	–	–	–	720	650	560
S	1	–	–	–	100	80	65
	2	–	–	–	100	80	65
	3	–	–	–	100	80	65
	4	165	150	115	80	80	80
H	1	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

KVNS™ A2™ Series • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.S..GD	0,23	0,46	0,71	0,17	0,33	0,51	0,13	0,25	0,38	0,11	0,22	0,33	0,10	0,20	0,30
.S..GB	0,23	0,46	0,74	0,17	0,33	0,54	0,13	0,25	0,40	0,11	0,22	0,35	0,10	0,20	0,32
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution

KVNS™ A2™ • Arbor Mount • Inch

Slot milling cutter for multiple materials

Использование и область применения

Обрабатываемый материал

Характеристики и преимущества

Со стороны станка

Со стороны заготовки

Рекомендации по выбору режущих пластин

Рекомендуемые начальные подачи [мм/зуб]

Recommended Starting Feeds [IPT]

Рекомендуемые начальные скорости резания [м/мин]

Recommended Starting Speeds [SFM]

KVNS™ A2™ Slotting Cutters • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)				(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1-P2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
P3-P4	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
P5-P6	.S..GD	KCPK30	.S..GB	KCPK30	.S..GB	KCPK30
M1-M2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
M3	.S..GD	KCPK30	.S..GB	KCPK30	.S..GB	KCPK30
K1-K2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
K3	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
N1-N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1-S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Предложения по продукции

Product Family suggestions

Send a Message

Уведомления

Send a Message

Sending to SolidCAM in progress...

KVNS™ A2™ • Arbor Mount • Inch

Slot milling cutter for multiple materials

Использование и область применения

Обрабатываемый материал

Характеристики и преимущества

Со стороны станка

Со стороны заготовки

Рекомендации по выбору режущих пластин

Рекомендуемые начальные подачи [мм/зуб]

Recommended Starting Feeds [IPT]

Рекомендуемые начальные скорости резания [м/мин]

Recommended Starting Speeds [SFM]