Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

Kennametal At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Результаты поиска для

Выбрать фильтры
Filters
Фильтры
    • Примененные фильтры:
    • Очистить все фильтры
  • X First Choice:
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (584)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (584)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (584)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (584)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (584)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (584)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (584)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (584)
  • M Stainless Steel (584)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (584)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (584)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (584)
  • K Cast Iron (584)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (584)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (584)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (584)
  • N Non-Ferrous Materials (584)
    • N1
      Wrought Aluminum
      (584)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (584)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (81)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (584)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (584)
    • N6
      Carbon, Graphite Composites, CFRP
      (584)
    • N7
      MMC's
      (81)
  • S High-Temp Alloys (584)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (584)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (584)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (584)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (584)
  • H Hardened Materials (413)
    • H1
      Hardened Materials 44-48 HRC
      (413)
    • H2
      Hardened Materials 48-55 HRC
      (380)
    • H3
      Hardened Materials 56-60 HRC
      (101)
    • H4
      Hardened Materials >60 HRC
      (101)
Выбрать First Choice
  • BR (62)
  • CN (461)
  • DE (488)
  • GB (277)
  • IN (134)
  • SG (227)
  • US (584)
Applications
Applications
  • Back Boring Back Boring (65)
  • Boring Boring (198)
  • Cut-Off Cut-Off (290)
  • Deep Grooving Deep Grooving (23)
  • Face Grooving Face Grooving (239)
  • Facing Facing (78)
  • Grooving Grooving (462)
  • ID Facing ID Facing (65)
  • ID Grooving ID Grooving (252)
  • Multiple Direction Cutting Multiple Direction Cutting (198)
  • Plunge Turning Plunge Turning (270)
  • Profiling Profiling (162)
  • TRN Boring TRN Boring (41)
  • Turning Turning (211)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (441)
  • Lightly Interrupted Cut (489)
  • Smooth Cut (562)
  • Varying Depth of Cut (552)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (308)
  • 92.25 (22)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (47)
  • Cutoff Support Blade A1-A3 (12)
  • Toolholder (270)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (388)
  • 2.0 (295)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (12)
  • 0.006 in (21)
  • 0.008 in (318)
  • 0.012 in (37)
  • 0.016 in (296)
  • 0.031 in (198)
  • 0.034 in (31)
  • 0.039 in (82)
  • 0.041 in (79)
  • 0.046 in (8)
  • 0.047 in (89)
  • 0.048 in (8)
  • 0.06 in (93)
  • 0.061 in (54)
  • 0.063 in (82)
  • 0.065 in (52)
  • 0.079 in (74)
  • 0.08 in (35)
  • 0.081 in (37)
  • 0.094 in (67)
  • 0.096 in (36)
  • 0.098 in (41)
  • 0.099 in (25)
  • 0.1 in (17)
  • 0.119 in (39)
  • 0.12 in (38)
  • 0.125 in (36)
  • 0.128 in (16)
  • 0.156 in (16)
  • 0.157 in (18)
  • 0.158 in (20)
  • 0.159 in (10)
  • 0.187 in (1)
  • 0.188 in (1)
  • 0.197 in (1)
  • 0.198 in (1)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (12)
  • 0.151 mm (21)
  • 0.2 mm (318)
  • 0.301 mm (37)
  • 0.4 mm (296)
  • 0.8 mm (198)
  • 0.851 mm (31)
  • 1.0 mm (82)
  • 1.05 mm (79)
  • 1.175 mm (8)
  • 1.201 mm (89)
  • 1.225 mm (8)
  • 1.5 mm (89)
  • 1.526 mm (34)
  • 1.55 mm (54)
  • 1.6 mm (82)
  • 1.651 mm (52)
  • 2.0 mm (74)
  • 2.025 mm (35)
  • 2.051 mm (37)
  • 2.375 mm (67)
  • 2.45 mm (36)
  • 2.5 mm (41)
  • 2.526 mm (25)
  • 2.551 mm (17)
  • 3.0 mm (39)
  • 3.026 mm (21)
  • 3.051 mm (17)
  • 3.176 mm (36)
  • 3.25 mm (16)
  • 3.95 mm (8)
  • 3.975 mm (8)
  • 4.0 mm (18)
  • 4.025 mm (20)
  • 4.05 mm (10)
  • 4.75 mm (1)
  • 4.775 mm (1)
  • 5.0 mm (1)
  • 5.025 mm (1)
Corner Radius Min до Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (255)
Corner Chamfer Min до Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (255)
Corner Chamfer Min до Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (111)
  • Lightly Interrupted Cut (159)
  • Smooth Cut (232)
  • Varying Depth of Cut (222)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1025 (59)
  • K313 (318)
  • KB1630 (101)
  • KB5625 (101)
  • KBH20 (101)
  • KC5010 (172)
  • KC5025 (180)
  • KC9110 (139)
  • KC9125 (139)
  • KCK20 (110)
  • KCK20B (179)
  • KCM35B (163)
  • KCP10 (139)
  • KCP10B (179)
  • KCP25 (139)
  • KCP25B (179)
  • KCU10 (380)
  • KCU10B (318)
  • KCU25 (448)
  • KD1405 (81)
  • KMS (50)
  • KT315 (130)
  • KU10 (139)
  • KU30T (101)
  • KY3500 (110)
  • KYS30 (48)
  • SP88F8 (20)
Hand Of Tool
Hand Of Tool
  • L (130)
  • N (12)
  • R (187)
Wiper Insert
Wiper Insert
  • N (583)
F Dimension
F Dimension
  • 1.276 mm (2)
  • 1.451 mm (1)
  • 1.826 mm (2)
  • 2.7 mm (1)
  • 12.0 mm (12)
  • 12.101 mm (2)
  • 12.15 mm (2)
  • 12.175 mm (2)
  • 12.226 mm (1)
  • 12.701 mm (7)
  • 12.726 mm (1)
  • 12.75 mm (3)
  • 12.8 mm (2)
  • 12.851 mm (1)
  • 12.9 mm (2)
  • 12.951 mm (1)
  • 13.0 mm (7)
  • 15.875 mm (2)
  • 15.976 mm (4)
  • 16.0 mm (5)
  • 16.026 mm (3)
  • 16.1 mm (2)
  • 16.125 mm (1)
  • 16.151 mm (3)
  • 16.2 mm (5)
  • 16.225 mm (2)
  • 16.875 mm (5)
  • 17.0 mm (6)
  • 19.05 mm (3)
  • 19.075 mm (8)
  • 19.125 mm (13)
  • 19.225 mm (1)
  • 19.3 mm (1)
  • 20.0 mm (4)
  • 20.05 mm (6)
  • 20.1 mm (17)
  • 20.201 mm (14)
  • 20.3 mm (2)
  • 21.776 mm (1)
  • 21.8 mm (1)
  • 22.0 mm (4)
  • 25.05 mm (7)
  • 25.1 mm (22)
  • 25.201 mm (8)
  • 25.3 mm (2)
  • 25.35 mm (2)
  • 25.425 mm (7)
  • 25.475 mm (14)
  • 25.576 mm (3)
  • 25.701 mm (1)
  • 25.776 mm (1)
  • 25.875 mm (1)
  • 26.0 mm (2)
  • 29.875 mm (2)
  • 30.0 mm (7)
  • 31.826 mm (4)
  • 31.925 mm (1)
  • 32.075 mm (9)
  • 32.176 mm (4)
  • 32.301 mm (1)
  • 32.65 mm (1)
  • 34.875 mm (1)
  • 38.275 mm (2)
  • 38.401 mm (2)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.05 in (2)
  • 0.057 in (1)
  • 0.073 in (2)
  • 0.106 in (1)
  • 0.473 in (12)
  • 0.477 in (2)
  • 0.479 in (2)
  • 0.48 in (2)
  • 0.481 in (1)
  • 0.5 in (7)
  • 0.501 in (1)
  • 0.502 in (3)
  • 0.504 in (2)
  • 0.506 in (1)
  • 0.508 in (2)
  • 0.51 in (1)
  • 0.512 in (7)
  • 0.625 in (2)
  • 0.629 in (4)
  • 0.63 in (5)
  • 0.631 in (3)
  • 0.634 in (2)
  • 0.635 in (1)
  • 0.636 in (3)
  • 0.638 in (5)
  • 0.639 in (2)
  • 0.664 in (5)
  • 0.669 in (6)
  • 0.75 in (3)
  • 0.751 in (8)
  • 0.753 in (13)
  • 0.757 in (1)
  • 0.76 in (1)
  • 0.787 in (4)
  • 0.789 in (6)
  • 0.791 in (17)
  • 0.795 in (14)
  • 0.799 in (2)
  • 0.857 in (1)
  • 0.858 in (1)
  • 0.866 in (4)
  • 0.986 in (7)
  • 0.988 in (22)
  • 0.992 in (8)
  • 0.996 in (2)
  • 0.998 in (2)
  • 1.002 in (7)
  • 1.004 in (14)
  • 1.008 in (3)
  • 1.012 in (1)
  • 1.016 in (1)
  • 1.02 in (1)
  • 1.024 in (2)
  • 1.176 in (2)
  • 1.181 in (7)
  • 1.254 in (4)
  • 1.258 in (1)
  • 1.264 in (9)
  • 1.268 in (4)
  • 1.272 in (1)
  • 1.285 in (1)
  • 1.373 in (1)
  • 1.508 in (2)
  • 1.512 in (2)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 25.0 mm (10)
  • 26.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (11)
  • 33.0 mm (1)
  • 40.0 mm (6)
  • 41.0 mm (1)
  • 44.0 mm (4)
  • 52.0 mm (9)
  • 65.0 mm (1)
  • 132.0 mm (1)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.984 in (10)
  • 1.024 in (2)
  • 1.181 in (2)
  • 1.26 in (11)
  • 1.299 in (1)
  • 1.575 in (6)
  • 1.614 in (1)
  • 1.732 in (4)
  • 2.047 in (9)
  • 2.559 in (1)
  • 5.197 in (1)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (9)
  • 1.024 in (2)
  • 1.102 in (3)
  • 1.181 in (2)
  • 1.26 in (19)
  • 1.339 in (4)
  • 1.379 in (2)
  • 1.655 in (18)
  • 1.969 in (1)
  • 2.047 in (16)
  • 2.441 in (23)
  • 2.52 in (4)
  • 3.228 in (2)
  • 11.811 in (1)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (9)
  • 26.0 mm (2)
  • 28.0 mm (3)
  • 30.0 mm (2)
  • 32.0 mm (19)
  • 34.0 mm (4)
  • 35.0 mm (2)
  • 42.0 mm (18)
  • 50.0 mm (1)
  • 52.0 mm (16)
  • 62.0 mm (23)
  • 64.0 mm (4)
  • 82.0 mm (2)
  • 300.0 mm (1)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (288)
  • S (41)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (18)
  • NEUTRAL (ZERO) (42)
  • POSITIVE-ZERO (103)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (10)
  • 1.969 in (7)
  • 1.98 in (4)
  • 2.511 in (1)
  • 2.52 in (9)
  • 3.15 in (9)
  • 3.938 in (4)
  • 4.0 in (1)
  • 5.0 in (1)
  • 6.0 in (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (10)
  • 50.0 mm (7)
  • 50.301 mm (4)
  • 63.75 mm (1)
  • 64.0 mm (9)
  • 80.0 mm (9)
  • 100.0 mm (4)
  • 101.601 mm (1)
  • 127.0 mm (1)
  • 152.4 mm (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (47)
frontEnd
Clamp Style
Clamp Style
  • C (21)
  • S (19)
  • Y (290)
Cutting Width
Cutting Width
  • 0.055 in (17)
  • 0.06 in (5)
  • 0.063 in (3)
  • 0.079 in (100)
  • 0.081 in (39)
  • 0.084 in (82)
  • 0.094 in (47)
  • 0.095 in (47)
  • 0.098 in (52)
  • 0.119 in (109)
  • 0.12 in (56)
  • 0.123 in (57)
  • 0.125 in (82)
  • 0.128 in (30)
  • 0.13 in (52)
  • 0.157 in (96)
  • 0.159 in (48)
  • 0.161 in (52)
  • 0.162 in (40)
  • 0.187 in (67)
  • 0.188 in (36)
  • 0.19 in (31)
  • 0.192 in (36)
  • 0.197 in (53)
  • 0.199 in (39)
  • 0.202 in (21)
  • 0.237 in (50)
  • 0.239 in (29)
  • 0.241 in (21)
  • 0.25 in (36)
  • 0.253 in (20)
  • 0.255 in (16)
  • 0.276 in (18)
  • 0.281 in (16)
  • 0.289 in (16)
  • 0.312 in (16)
  • 0.313 in (8)
  • 0.315 in (23)
  • 0.316 in (8)
  • 0.317 in (22)
  • 0.32 in (12)
  • 0.375 in (2)
  • 0.379 in (1)
  • 0.38 in (1)