Wróć
Edytuj
Dodaj
Nazwa : {{SolutionName}}
KOR5™ DA • Square End • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch
KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
Właściwości i zalety
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip splitters for ideal chip evacuation.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
- Safe-Lock for pull out protection.
Zastosowania
Ramping: 4°
Corner Style: Corner Radius
Corner Style: Square End
Helix Angle: 35°
Side Milling/Shoulder Milling: Roughing
Side Milling/Shoulder Milling: Finishing
Through Coolant - Solid End Mill
Trochoidal Milling
SAFE-LOCK Shank
Tool Dimensions: Flute Configuration: 5
Materiały przedmiotu obrabianego
N
Non-Ferrous
Filtry i kolumny
Filters
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
Workpiece Material
Workpiece Material
-
N Non-Ferrous Materials (4)
-
N1Wrought Aluminum(4)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
-
Applications
Applications
-
Pocket Helical (4)
-
Pocket Milling (4)
-
Shoulder Milling (4)
-
-
Trochoidal Milling (4)
Cutting Diameter
Cutting Diameter
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (1)
-
1.0 in (1)
do
Cutting Diameter
Cutting Diameter
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (1)
-
25.401 mm (1)
do
Cutting Length
Cutting Length
-
38.1 mm (1)
-
47.625 mm (1)
-
57.151 mm (1)
-
76.2 mm (1)
do
Cutting Length
Cutting Length
-
1.5 in (1)
-
1.875 in (1)
-
2.25 in (1)
-
3.0 in (1)
do
backEnd
Back-End Diameter
Back-End Diameter
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (1)
-
25.401 mm (1)
do
Back-End Diameter
Back-End Diameter
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (1)
-
1.0 in (1)
do
No filters matching ""
Zmień widoczne kolumny za pomocą dowolnego z parametrów wymienionych poniżej. Można wyświetlić maksymalnie 7 kolumn.
Wyświetlanie
1- 4
z 4 Wyniki
Metryczne
Calowe
Pokaż
Metryczne
Calowe
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [Z] Number of Flutes | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6754923 | KOR5SE0500R150SLI | KOR5SE0500R150SLI | K600 | SAFE-LOCK | 12.7 | .5 | 5 | 12.7000 | .5000 | 38.1000 | 1.500 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Cena katalogowa:
$180.11
/każdy
Twoja cena::
Ilość
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6754927 | KOR5SE0625R188SLI | KOR5SE0625R188SLI | K600 | SAFE-LOCK | 15.875 | .625 | 5 | 15.8750 | .6250 | 47.6250 | 1.875 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Cena katalogowa:
$314.02
/każdy
Twoja cena::
Ilość
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6754931 | KOR5SE0750R225SLI | KOR5SE0750R225SLI | K600 | SAFE-LOCK | 19.05 | .75 | 5 | 19.0500 | .7500 | 57.1500 | 2.250 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Cena katalogowa:
$362.65
/każdy
Twoja cena::
Ilość
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6754936 | KOR5SE1000R300SLI | KOR5SE1000R300SLI | K600 | SAFE-LOCK | 25.4 | 1.0 | 5 | 25.4000 | 1.000 | 76.2000 | 3.000 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Cena katalogowa:
$610.33
/każdy
Twoja cena::
Ilość
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cena katalogowa:
Rabat: %
Pracownik zastępczy
Ten produkt jest niedostępny
Produkt zastępczy Ten produkt może być dostępny u dystrybutora
Produkt zastępczy Ten produkt może być dostępny u dystrybutora
Ilość
Sprzedawane w opakowaniach po
Gatunki
-
K600
Carbide grade made from high-quality, micrograin materials for cutting all types of workpiece materials. Very high toughness ensures a controlled wear rate. The micrograin structure enables extremely sharp cutting edges.
N Non-Ferrous
| Ae/D1 | 2% | 5% | 10% | 20% | 30% | 40% | 50% | 100% |
| Max Ap | Ap1 Max | Ap1 Max | Ap1 Max | Ap1 Max | 2 x D1 | 1 x D1 | .5 x D1 | .25 x D1 |
| Feed Multiplier | 3.60 | 2.30 | 1.70 | 1.25 | 1.09 | 1.02 | 1.00 | .90 |
| Ae/D1 | 2% | 5% | 10% | 20% | 30% | 40% | 50% | 100% |
| Max Ap | Ap1 Max | Ap1 Max | Ap1 Max | Ap1 Max | 2 x D1 | 1 x D1 | 0,5 x D1 | 0,25 x D1 |
| Feed Multiplier (KFz) | 3,60 | 2,30 | 1,70 | 1,25 | 1,09 | 1,02 | 1,00 | 0,90 |
 <="" td=""> |  <="" td=""> |  <="" td="" /> |
|||||||||||
| Side Milling (A) and Slotting (B) | K600 | Recommended feed per tooth (IPT = inch/th) | |||||||||||
| D1 Diameter | |||||||||||||
| Material Group | A | B | Cutting Speed vc SFM | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||
| ap | ae | ap | min | max | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
| N | 1 | 0.5 x D1 | 0.5 x D1 | 0.25 x D1 | 640 | – | 6560 | IPT | 0.0030 | 0.0050 | 0.0060 | 0.0080 | 0.0090 |
| 2 | 0.5 x D1 | 0.5 x D1 | 0.25 x D1 | 640 | – | 4920 | IPT | 0.0025 | 0.0045 | 0.0055 | 0.0070 | 0.0085 | |
| Material Group | <="" td=""> | <="" td=""> | K600 | Recommended feed per tooth (fz = mm/th) | |||||||||
| A | B | Cutting Speed vc m/min | D1 Diameter | ||||||||||
| ap | ae | ap | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||
| N | 1 | 0,5 x D1 | 0,5 x D1 | 0,25 x D1 | 200 | – | 2000 | fz | 0,080 | 0,120 | 0,160 | 0,200 | 0,225 |
| 2 | 0,5 x D1 | 0,5 x D1 | 0,25 x D1 | 200 | – | 1500 | fz | 0,070 | 0,110 | 0,140 | 0,180 | 0,213 | |