| SAP Material Number | 5615050 |
| ISO Catalog Number | XCP27S318R159SGP |
| ANSI Catalog Number | XCP27S318R159SGP |
| Grade | KCPK30 |
| Insert Size | 27 |
| [W] Cutting Width | 3.1800 mm |
| [W] Cutting Width | .1250 in |
| [LI] Insert Length | 18.0000 mm |
| [LI] Insert Length | .7090 in |
| [S] Insert Thickness | 3.7500 mm |
| [S] Insert Thickness | .1480 in |
| [RC] Corner Radius Center | 1.5900 mm |
| [RC] Corner Radius Center | .0620 in |
| Average Chip Thickness [HM] | 0.0400 mm |
| Average Chip Thickness [HM] | .0016 in |
| Cutting Edges per Insert | 1 |
Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| (Light geometry) | (Strong geometry) | |||||
| wear resistance |  <="" td=""> | toughness | ||||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
| P3–P4 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
| P5–P6 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
| M1–M2 | .S..GP | KCU25 | .S..GP | KCPM40 | .S..GP | KCPM40 |
| M3 | .S..GP | KCU25 | .S..GP | KCPM40 | .S..GP | KCPM40 |
| K1–K2 | .S..GP | KCU25 | .S..GP | KCPK30 | .S..GP | KCPK30 |
| K3 | .S..GP | KCU25 | .S..GP | KCPK30 | .S..GP | KCPK30 |
| N1–N2 | .S..GP | KCU25 | ||||
| N3 | .S..GP | KCU25 | ||||
| S1–S2 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
| S3 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
| S4 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | |||||||||||
| 5% | 10% | 20% | 30% | ||||||||||
| .S..GP | 0,13 | 0,28 | 0,35 | 0,09 | 0,20 | 0,32 | 0,07 | 0,15 | 0,32 | 0,06 | 0,12 | 0,30 | .S..GP |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | |||||||||||
| 5% | 10% | 20% | 30% | ||||||||||
| .S..GP | .005 | .011 | .027 | .004 | .008 | .020 | .003 | .006 | .015 | .002 | .005 | .012 | .S..GP |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | KCPK30 | KCPM40 | KCU25 | |||||||
| P | 1 | 365 | 320 | 270 | 200 | 190 | 150 | 260 | 230 | 215 |
| 2 | 280 | 255 | 230 | 190 | 175 | 140 | 220 | 190 | 160 | |
| 3 | 255 | 230 | 205 | 170 | 145 | 120 | 200 | 170 | 140 | |
| 4 | 190 | 175 | 160 | 150 | 130 | 90 | 180 | 150 | 120 | |
| 5 | 260 | 230 | 210 | 105 | 75 | 60 | 150 | 135 | 120 | |
| 6 | 160 | 135 | 120 | 75 | 60 | 50 | 130 | 100 | 80 | |
| M | 1 | – | – | – | 170 | 150 | 135 | 210 | 170 | 135 |
| 2 | – | – | – | 155 | 130 | 110 | 170 | 150 | 110 | |
| 3 | – | – | – | 115 | 100 | 80 | 130 | 120 | 85 | |
| K | 1 | 260 | 230 | 205 | – | – | – | 270 | 220 | 170 |
| 2 | 235 | 210 | 190 | – | – | – | 230 | 190 | 160 | |
| 3 | 195 | 175 | 160 | – | – | – | 210 | 160 | 140 | |
| N | 1 | – | – | – | – | – | – | 760 | 680 | 400 |
| 2 | – | – | – | – | – | – | 710 | 550 | 350 | |
| 3 | – | – | – | – | – | – | 620 | 490 | 320 | |
| S | 1 | – | – | – | 30 | 25 | 25 | 30 | 25 | 20 |
| 2 | – | – | – | 30 | 25 | 25 | 30 | 25 | 20 | |
| 3 | – | – | – | 40 | 30 | 25 | 40 | 30 | 20 | |
| 4 | – | – | – | 50 | 40 | 25 | 55 | 40 | 25 | |
| Material Group | KCPK30 | KCPM40 | KCU25 | |||||||
| P | 1 | 1200 | 1050 | 890 | 660 | 620 | 500 | 860 | 750 | 700 |
| 2 | 920 | 835 | 755 | 620 | 580 | 460 | 720 | 630 | 530 | |
| 3 | 835 | 755 | 675 | 550 | 480 | 390 | 660 | 560 | 460 | |
| 4 | 625 | 575 | 525 | 490 | 420 | 300 | 590 | 490 | 390 | |
| 5 | 855 | 755 | 690 | 350 | 250 | 200 | 490 | 440 | 390 | |
| 6 | 525 | 445 | 400 | 250 | 200 | 160 | 430 | 330 | 260 | |
| M | 1 | – | – | – | 560 | 490 | 450 | 690 | 560 | 450 |
| 2 | – | – | – | 510 | 430 | 360 | 560 | 500 | 360 | |
| 3 | – | – | – | 380 | 330 | 260 | 430 | 400 | 280 | |
| K | 1 | 850 | 760 | 665 | – | – | – | 890 | 720 | 560 |
| 2 | 770 | 690 | 630 | – | – | – | 760 | 630 | 530 | |
| 3 | 645 | 575 | 530 | – | – | – | 690 | 530 | 460 | |
| N | 1 | – | – | – | – | – | – | 2500 | 2230 | 1310 |
| 2 | – | – | – | – | – | – | 2330 | 1800 | 1150 | |
| 3 | – | – | – | – | – | – | 2030 | 1600 | 1050 | |
| S | 1 | – | – | – | – | – | – | 100 | 85 | 60 |
| 2 | – | – | – | – | – | – | 100 | 85 | 60 | |
| 3 | – | – | – | – | – | – | 125 | 100 | 60 | |
| 4 | – | – | – | – | – | – | 175 | 125 | 85 | |
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Wybierz pliki, których szukasz, i pobierz je wszystkie jednocześnie
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
