Produkt podobny do:
KOR5™ DS • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch
KOR5™ DS Solid Carbide End Mill for Dynamic Milling of Steel and Stainless Steel
Nr materiału6769720
Nr katalogowy ISOKOR5RA0250R075HAR030Nr katalogowy ANSIKOR5RA0250R075HAR030
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
- H Hardened Materials
Trochoidal Milling
Ramping: 5°
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 5
Shank - Cylindrical Plain
Helix Angle: 40°
Corner Style: Corner Radius
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Nr materiału | 6769720 |
Nr katalogowy ISO | KOR5RA0250R075HAR030 |
Nr katalogowy ANSI | KOR5RA0250R075HAR030 |
Grade | KC643M |
Adapter Style Machine Side | Straight-Cylindrical |
[Re] Corner Radius | 0.762 mm |
[Re] Corner Radius | .03 in |
[Z] Number of Flutes | 5 |
[D1] Effective Cutting Diameter | 6.35 mm |
[D1] Effective Cutting Diameter | .25 in |
[D] Adapter / Shank / Bore Diameter | 6.35 mm |
[D] Adapter / Shank / Bore Diameter | .25 in |
[AP1MAX] 1st Maximum Cutting Depth | 19.05 mm |
[AP1MAX] 1st Maximum Cutting Depth | .75 in |
[L] Overall Length | 63.5 mm |
[L] Overall Length | 2.5 in |
Materiały przedmiotu obrabianego
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
- Hardened Materials
Zastosowania
Trochoidal Milling
Ramping: 5°
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 5
Shank - Cylindrical Plain
Helix Angle: 40°
Corner Style: Corner Radius
Właściwości i zalety
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip deformers for ideal chip evacuation at high surface quality.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
TechnicalInfo
KOR5™ DS • 5 Flutes • 3 x D • Adjustment factor table for feed calculation • Inch
Ae/D1 | 0.50% | 1.00% | 1.50% | 2.00% | 4.00% | 5.00% | 8.00% | 10.00% | |
Speed factor | Kv | 2.15 | 2.11 | 2.07 | 1.48 | 1.11 | 1.07 | 1.04 | 1.00 |
Feed factor | KFz | 1.65 | 1.53 | 1.47 | 1.41 | 1.35 | 1.29 | 1.18 | 1.00 |
Parametry skrawania
KOR5™ DS • 5 Flutes • 3 x D • Application Data • Inch
Material | |||||||||||||
Side Milling (A) | Recommended feed per tooth (IPT = inch/th) for side milling (A). | ||||||||||||
A | KC643M | D1 | |||||||||||
Cutting Speed | frac. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||
ap | ae | Min | Max | dec. | .2500 | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
P | 0 | 3 x D | 0.1 x D | 500 | – | 1440 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 |
1 | 3 x D | 0.1 x D | 500 | – | 1440 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 | |
2 | 3 x D | 0.1 x D | 460 | – | 1370 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 | |
3 | 3 x D | 0.1 x D | 400 | – | 1150 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 | |
4 | 3 x D | 0.1 x D | 300 | – | 1080 | IPT | .0017 | .0025 | .0031 | .0036 | .0040 | .0046 | |
5 | 3 x D | 0.1 x D | 200 | – | 720 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
6 | 3 x D | 0.1 x D | 170 | – | 540 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
M | 1 | 3 x D | 0.1 x D | 300 | – | 830 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 |
2 | 3 x D | 0.1 x D | 200 | – | 580 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
3 | 3 x D | 0.1 x D | 200 | – | 510 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
K | 1 | 3 x D | 0.1 x D | 400 | – | 1080 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 |
2 | 3 x D | 0.1 x D | 370 | – | 1010 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 | |
3 | 3 x D | 0.1 x D | 370 | – | 940 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
S | 1 | 3 x D | 0.1 x D | 170 | – | 650 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 |
2 | 3 x D | 0.1 x D | 80 | – | 580 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
3 | 3 x D | 0.1 x D | 80 | – | 290 | IPT | .0010 | .0015 | .0018 | .0022 | .0025 | .0029 | |
4 | 3 x D | 0.1 x D | 170 | – | 430 | IPT | .0013 | .0020 | .0026 | .0030 | .0034 | .0040 | |
H | 1 | 3 x D | 0.1 x D | 270 | – | 1010 | IPT | .0017 | .0025 | .0031 | .0036 | .0040 | .0046 |
2 | 3 x D | 0.1 x D | 230 | – | 870 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 |
KOR™5DS
KOR™ Series End Mills: Solid End Mills for Dynamic Milling