SNMG

Grades

• CL4
• CM2
• CM4

  CVD-TiN-TiCN-TIN multi-layer thick coated fine grade carbide
  High level of wear resistance
  Primarily for use on unalloyed carbon steels as well as alloyed steel and cast steel

• GX

  Uncoated carbide grade
  Heavy Machining (H)
  For machining steel
  For use in unfavourable conditions
  

• K313

  Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
  Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

  N Non-Ferrous

  S High-Temp Alloys
• K420

  K420

• K68

  Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade.
  Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.

  N Non-Ferrous

  S High-Temp Alloys
• KC5010

  Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
  Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

  P Steel

  M Stainless Steel

  S High-Temp Alloys
• KC9125RR

  P Steel
• KCP10B

  Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

  Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

  P Steel

  K Cast Iron
• KCP25

  Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
  Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

  P Steel

  K Cast Iron
• KCP30B

  Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3-TiOCN coating.

  Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life.

  P Steel
• KCP40

  Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating.
  Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts.

  P Steel

  M Stainless Steel
• KCU10

  Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
  Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

  P Steel

  M Stainless Steel

  S High-Temp Alloys
• KM1

  Composition: Uncoated, fine grain, straight carbide grade, containing 6% cobalt.
  Application: General purpose grade for use on gray iron, aluminum, and non-ferrous
  work piece materials. Available for use with HTS-C deep drilling tools and CTR
  countersinking tools.
  

• SP61EJ