Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

TG75 Single-Angle Solid Tap Collets
TG75 Single-Angle Solid Tap Collets
TG75 Single-Angle Solid Tap Collets
TG75 Single-Angle Solid Tap Collets
Select the files you wish to request
Request {{cadTool}} format
{{cadTool}} format is not available

TG75 Solid Tap Collet

TG75 Single-Angle Solid Tap Collets

SAP Material Number 1017268
ISO Catalog Number 75TGST025
ANSI Catalog Number 75TGST025
Tap Range M6 & M6.3 mm
Tap Range #14 & 1/4 in
Collet Series TG75
[D1] Clamping Diameter Maximum 6.477 mm
[D1] Clamping Diameter Maximum .255 in
[S10] Square Size 4.851 mm
[S10] Square Size .191 in
[L9] Clamping Hole Length 21.285 mm
[L9] Clamping Hole Length .838 in
Zobacz wszystkie warianty produktów


  • Tapping: Through CoolantTapping: Through Coolant
  • Shank - Cylindrical with SquareShank - Cylindrical with Square
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - No CoolantCoolant - No Coolant

Właściwości i zalety

For 75TGSTC, rubber-filled slots seal collet for coolant-fed tool applications.
Can be used in all standard TG collet chucks.
Provides Tremendous Grip (3:1 advantage) and accuracy for all drilling applications.
Industry-standard ERICKSON™ single-angle collet system.
0,13mm (.005") range of collapse.
Grips on back taper and margin of drill for maximum feed rates and more accurate holes.
Slot in back of collets acts as a drive for the tap square.
Manufactured to DIN 6499 Class 2 accuracy.

Strona maszyny


Strona przedmiotu obrabianego

Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.


Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Dziękujemy za pomyślną rejestrację. Możesz teraz zalogować się i korzystać z witryny

You are about to leave the Solution building process.

Are you sure you want to leave?