Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle
Ürün Önerileri
Product Family suggestions
Merhaba, User Name
Seçtiğiniz Hesap:
There is an issue with your account. Please contact customer support.
Sold To Account
Hesabı Değiştir
Ship To Account
Hesabı Değiştir
- Kontrol Paneli
- Siparişleri Yönet
- Kanalları Yönet
- Adres Defteri
-
Bildirimler
Tümünü okundu olarak işaretle - Sık Kullanılanlar
- Parolayı Değiştir
- Profilim
- Oturumu Kapat
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip, daha çok frezeleyin.
Şimdi Satın Alın.
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}- Ürünler
- /
- KNS® Kanal açma • XCP-SGP • Tek uçlu • Tam radyüs kesici uçlar
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
KNS® Kanal açma • XCP-SGP • Tek uçlu • Tam radyüs kesici uçlar
KNS® Kesici uçlar • Tek uçlu • Tam radyüs
Özellikler ve avantajlar
- KCPK30, genel olarak ve çeliklerin ve dökme demirlerin kaba frezelenmesini kapsayan geniş bir uygulama alınan sahiptir. En iyi performansı kuru işlemede sağlar, ancak ıslak işlemede de kullanılabilir.
- KCPM40™, çelik ve paslanmaz çeliğin frezelenmesinde ilk tercihtir. İyi termal şok direnci, bu kaliteyi hem ıslak hem de kuru işleme için ideal duruma getirir. Özellikle, genel ve ağır işlenmede kullanım için uygundur.
- KCPM25™, ince ile orta talaş kalınlığına sahip uygulamalar için ilk tercihtir. Bu kalite birçok iş parçası malzemelerinde, kuru ve ıslak işlemede kullanılır.
KNS® Slotting Cutter • Insert Selection Guide | ||||||
Material Group | Light
|
General
|
Heavy
|
|||
– | (Light geometry) | (Strong geometry) | ||||
– | wear
|
<="" td=""> | toughness | |||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1-P2 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
P3-P4 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
P5-P6 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
M1-M2 | .S..GP | KCU25 | .S..GP | KCPM40 | .S..GP | KCPM40 |
M3 | .S..GP | KCU25 | .S..GP | KCPM40 | .S..GP | KCPM40 |
K1-K2 | .S..GP | KCU25 | .S..GP | KCPK30 | .S..GP | KCPK30 |
K3 | .S..GP | KCU25 | .S..GP | KCPK30 | .S..GP | KCPK30 |
N1-N2 | – | – | .S..GP | KCU25 | – | – |
N3 | – | – | .S..GP | KCU25 | – | – |
S1-S2 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
S3 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
S4 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
H1 | – | – | – | – | – | – |
Önerilen başlangıç ilerlemeleri [mm]
KNS® Slotting Cutter • Recommended Starting Feeds [mm/th] | ||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | |||||||||||
5% | 10% | 20% | 30–100% | |||||||||
L | M | H | L | M | H | L | M | H | L | M | H | |
.S..GP | 0,13 | 0,28 | 0,35 | 0,09 | 0,20 | 0,32 | 0,07 | 0,15 | 0,32 | 0,06 | 0,12 | 0,30 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
Light
|
General
|
Heavy
|
KNS® Slotting Cutter • Recommended Starting Feeds [IPT] | ||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | |||||||||||
5% | 10% | 20% | 30–100% | |||||||||
L | M | H | L | M | H | L | M | H | L | M | H | |
.S..GP | 0.005 | 0.011 | 0.027 | 0.004 | 0.008 | 0.020 | 0.003 | 0.006 | 0.015 | 0.002 | 0.005 | 0.012 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
Light
|
General
|
Heavy
|
Önerilen başlangıç hızları [m/dk.]
KNS® Slotting Cutter • Recommended Starting Speed [m/min] | ||||||||||
Grade | KCU25 | KCPK30 | KMF | |||||||
Chip Thickness hex mm | Min | Max | Min | Max | Min | Max | ||||
Material Group | Max | Start | Min | Max | Start | Min | Max | Start | Min | |
P | 1 | 260 | 230 | 215 | 455 | 395 | 370 | 295 | 260 | 245 |
2 | 220 | 190 | 160 | 280 | 255 | 230 | 250 | 215 | 180 | |
3 | 200 | 170 | 140 | 255 | 230 | 205 | 230 | 195 | 160 | |
4 | 180 | 150 | 120 | 225 | 185 | 160 | 205 | 170 | 135 | |
5 | 150 | 135 | 120 | 190 | 170 | 150 | 170 | 155 | 135 | |
6 | 130 | 100 | 80 | 160 | 135 | 110 | 150 | 115 | 90 | |
M | 1 | 210 | 170 | 135 | 205 | 185 | 155 | 195 | 170 | 155 |
2 | 170 | 150 | 110 | 185 | 160 | 140 | 175 | 150 | 125 | |
3 | 130 | 120 | 85 | 145 | 130 | 115 | 130 | 115 | 90 | |
K | 1 | 270 | 220 | 170 | 295 | 265 | 240 | – | – | – |
2 | 230 | 190 | 160 | 235 | 210 | 190 | – | – | – | |
3 | 210 | 160 | 140 | 195 | 175 | 160 | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | |
S | 1 | 30 | 25 | 20 | – | – | – | 40 | 35 | 30 |
2 | 30 | 25 | 20 | – | – | – | 40 | 35 | 30 | |
3 | 40 | 30 | 20 | – | – | – | 50 | 40 | 30 | |
4 | 55 | 40 | 25 | 50 | 45 | 35 | 55 | 50 | 35 | |
H | 1 | – | – | – | – | – | – | – | – | – |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
KNS® Slotting Cutter • Recommended Starting Speed [SFM] | ||||||||||
Grade | KCPK30 | KCPK30 | KMF | |||||||
Chip Thickness hex Inch | Min | Max | Min | Max | Min | Max | ||||
Material Group | Max | Start | Min | Max | Start | Min | Max | Start | Min | |
P | 1 | 855 | 755 | 705 | 1495 | 1295 | 1215 | 970 | 855 | 805 |
2 | 720 | 625 | 525 | 920 | 835 | 755 | 820 | 705 | 590 | |
3 | 655 | 560 | 460 | 835 | 755 | 675 | 755 | 640 | 525 | |
4 | 590 | 490 | 395 | 740 | 605 | 525 | 675 | 560 | 445 | |
5 | 490 | 445 | 395 | 625 | 560 | 490 | 560 | 510 | 445 | |
6 | 425 | 330 | 260 | 525 | 445 | 360 | 490 | 375 | 295 | |
M | 1 | 690 | 560 | 445 | 675 | 605 | 510 | 640 | 560 | 510 |
2 | 560 | 490 | 360 | 605 | 525 | 460 | 575 | 490 | 410 | |
3 | 425 | 395 | 280 | 475 | 425 | 375 | 425 | 375 | 295 | |
K | 1 | 885 | 720 | 560 | 970 | 870 | 785 | – | – | – |
2 | 755 | 625 | 525 | 770 | 690 | 625 | – | – | – | |
3 | 690 | 525 | 460 | 640 | 575 | 525 | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | |
S | 1 | 100 | 80 | 65 | – | – | – | 130 | 115 | 100 |
2 | 100 | 80 | 65 | – | – | – | 130 | 115 | 100 | |
3 | 130 | 100 | 65 | – | – | – | 165 | 130 | 100 | |
4 | 180 | 130 | 80 | 165 | 150 | 115 | 180 | 165 | 115 | |
H | 1 | – | – | – | – | – | – | – | – | – |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |