Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle
Ürün Önerileri
Product Family suggestions
Merhaba, User Name
Seçtiğiniz Hesap:
There is an issue with your account. Please contact customer support.
Sold To Account
Hesabı Değiştir
Ship To Account
Hesabı Değiştir
- Kontrol Paneli
- Siparişleri Yönet
- Kanalları Yönet
- Adres Defteri
-
Bildirimler
Tümünü okundu olarak işaretle - Sık Kullanılanlar
- Parolayı Değiştir
- Profilim
- Oturumu Kapat
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip, daha çok frezeleyin.
Şimdi Satın Alın.
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}- Ürünler
- /
- HARVI™ Ultra 8X • Helical Mill • IC 12 • Taper Flange Mount • Inch
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
HARVI™ Ultra 8X • Helical Mill • IC 12 • Taper Flange Mount • Inch
HARVI™ Ultra 8X • Helical Mill • IC 12 • Taper Flange Mount
Özellikler ve avantajlar
- HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys.
- Large helix ensures hassle-free chip evacuation even at highest metal removal rates (MRR).
- Harvi Ultra 8X cutters with different lead row pocket designs available. Especially for applications that require larger corner radii.
- Up to 8 cutting edges per insert. That's helical milling at the lowest possible cost-per-edge.
- HARVI Ultra 8x Taper Flange Adapters achieve maximum tool stiffness and maximum tool life.
- HU8X… cutters accommodate inserts in the lead row with corner radii from .031–.094″ (0,8–2,4mm ).
- HU8X…..R cutters accommodate inserts in the lead row with corner radii from .125–.250″ (3,2–6,4mm).
Kullanım ve uygulama alanları
- Slotting: Shoulder Profiling
- Slotting: Shoulder
- Shank: Flange Mount Milling
- Side Milling/Shoulder Milling: Square End
- Side Milling/Shoulder Milling: Eased Chamfer
- Milling - Through Coolant
- Pocketing
Insert Selection Guide
Material Group | Light
|
General
|
Heavy
|
|||
(Light geometry) | (Strong geometry) | |||||
wear
|
<="" td=""> | toughness | ||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | .S..GDH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
M1–M2 | .S..GDH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
M3 | .S..GDH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
K1–K2 | – | – | – | – | – | – |
K3 | – | – | – | – | – | – |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | .S..GDH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
S3 | .S..GDH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
S4 | .S..GDH | KCSM40 | .S..GDH | KCSM40 | .S..GDH | KCSM40 |
H1 | – | – | – | – | – | – |
Recommended Starting Feeds [IPT]
HARVI™ Ultra 8X • Recommended Starting Feeds [IPT] | ||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | |||||||||||
10% | 20% | 30% | 40–100% | |||||||||
L | M | H | L | M | H | L | M | H | L | M | H | |
HARVI Ultra 8X - SNHJ....E..LEH | 0.004 | 0.007 | 0.008 | 0.003 | 0.005 | 0.006 | 0.002 | 0.004 | 0.005 | 0.002 | 0.004 | 0.005 |
HARVI Ultra 8X - SNHJ....S..GDH | 0.005 | 0.008 | 0.010 | 0.004 | 0.006 | 0.008 | 0.003 | 0.005 | 0.007 | 0.003 | 0.005 | 0.006 |
KSSM8+ - SNPJ…..S..GD | 0.007 | 0.015 | 0.023 | 0.005 | 0.011 | 0.017 | 0.004 | 0.009 | 0.015 | 0.004 | 0.009 | 0.014 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. |
Light
|
General
|
Heavy
|
Recommended Starting Feeds [IPT]
Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | |||||||||||||||||
Material | Insert Geometry | 5% | 10% | 20% | 30% | 40–100% | Insert Geometry | ||||||||||
P5 | .S..GDH | – | – | – | .007 | .012 | .018 | .006 | .010 | .016 | .005 | .008 | .013 | .003 | .005 | .007 | .S..GDH |
P6 | .S..GDH | – | – | – | .007 | .010 | .015 | .006 | .009 | .013 | .005 | .007 | .011 | .003 | .004 | .006 | .S..GDH |
M1 | .S..GDH | – | – | – | .007 | .011 | .017 | .006 | .010 | .015 | .005 | .008 | .012 | .003 | .004 | .007 | .S..GDH |
M2 | .S..GDH | – | – | – | .007 | .011 | .017 | .006 | .010 | .015 | .005 | .008 | .012 | .003 | .004 | .007 | .S..GDH |
M3 | .S..GDH | – | – | – | .007 | .010 | .015 | .006 | .009 | .013 | .005 | .007 | .011 | .003 | .004 | .006 | .S..GDH |
S1 | .S..GDH | – | – | – | .007 | .008 | .012 | .006 | .007 | .011 | .005 | .006 | .009 | .003 | .003 | .005 | .S..GDH |
S2 | .S..GDH | – | – | – | .007 | .008 | .012 | .006 | .007 | .011 | .005 | .006 | .009 | .003 | .003 | .005 | .S..GDH |
S3 | .S..GDH | – | – | – | .007 | .009 | .014 | .006 | .008 | .012 | .005 | .007 | .010 | .003 | .004 | .006 | .S..GDH |
S4 | .S..GDH | – | – | – | .007 | .011 | .017 | .006 | .010 | .015 | .005 | .008 | .012 | .003 | .004 | .007 | .S..GDH |
Light
|
General
|
Heavy
|
Önerilen başlangıç ilerlemeleri [mm]
Light
|
General
|
Heavy
|
HARVI™ Ultra 8X • Recommended Starting Feeds [mm/th] | ||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | |||||||||||
10% | 20% | 30% | 40–100% | |||||||||
L | M | H | L | M | H | L | M | H | L | M | H | |
HARVI Ultra 8X - SNHJ....E..LEH | 0.09 | 0.17 | 0.23 | 0.07 | 0.13 | 0.18 | 0.06 | 0.11 | 0.15 | 0.06 | 0.10 | 0.14 |
HARVI Ultra 8X - SNHJ....S..GDH | 0.13 | 0.20 | 0.31 | 0.10 | 0.15 | 0.23 | 0.09 | 0.13 | 0.20 | 0.08 | 0.12 | 0.18 |
KSSM8+ - SNPJ…..S..GD | 0,17 | 0,37 | 0,59 | 0,13 | 0,27 | 0,44 | 0,11 | 0,24 | 0,38 | 0,10 | 0,22 | 0,35 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. |
Önerilen başlangıç ilerlemeleri [mm]
Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | |||||||||||||||||
Material | Insert Geometry | 5% | 10% | 20% | 30% | 40–100% | Insert Geometry | ||||||||||
P5 | .S..GDH | – | – | – | 0,18 | 0,29 | 0,45 | 0,16 | 0,26 | 0,40 | 0,13 | 0,21 | 0,33 | 0,07 | 0,12 | 0,18 | .S..GDH |
P6 | .S..GDH | – | – | – | 0,18 | 0,24 | 0,38 | 0,16 | 0,22 | 0,34 | 0,13 | 0,18 | 0,27 | 0,07 | 0,10 | 0,15 | .S..GDH |
M1 | .S..GDH | – | – | – | 0,18 | 0,28 | 0,43 | 0,16 | 0,25 | 0,38 | 0,13 | 0,20 | 0,31 | 0,07 | 0,11 | 0,17 | .S..GDH |
M2 | .S..GDH | – | – | – | 0,18 | 0,28 | 0,43 | 0,16 | 0,25 | 0,38 | 0,13 | 0,20 | 0,31 | 0,07 | 0,11 | 0,17 | .S..GDH |
M3 | .S..GDH | – | – | – | 0,18 | 0,24 | 0,38 | 0,16 | 0,22 | 0,34 | 0,13 | 0,18 | 0,27 | 0,07 | 0,10 | 0,15 | .S..GDH |
S1 | .S..GDH | – | – | – | 0,18 | 0,20 | 0,30 | 0,16 | 0,17 | 0,27 | 0,13 | 0,14 | 0,22 | 0,07 | 0,08 | 0,12 | .S..GDH |
S2 | .S..GDH | – | – | – | 0,18 | 0,20 | 0,30 | 0,16 | 0,17 | 0,27 | 0,13 | 0,14 | 0,22 | 0,07 | 0,08 | 0,12 | .S..GDH |
S3 | .S..GDH | – | – | – | 0,18 | 0,23 | 0,35 | 0,16 | 0,20 | 0,31 | 0,13 | 0,17 | 0,26 | 0,07 | 0,09 | 0,14 | .S..GDH |
S4 | .S..GDH | – | – | – | 0,18 | 0,28 | 0,43 | 0,16 | 0,25 | 0,38 | 0,13 | 0,20 | 0,31 | 0,07 | 0,11 | 0,17 | .S..GDH |
Light
|
General
|
Heavy
|
HARVI™ Ultra 8X • Recommended Starting Speed [SFM] | |||||||||||||||||||
Grade | KC725M | KCK15 | KCPK30 | KCK20B | KCPM40 | KCSM40 | |||||||||||||
Chip Thickness hex Inch | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | |||||||
Material Group | Max | Start | Min | Max | Start | Min | Max | Start | Min | Max | Start | Min | Max | Start | Min | Max | Start | Min | |
P | 1 | 855 | 755 | 705 | – | – | – | 1495 | 1295 | 1215 | – | – | – | 970 | 855 | 805 | 1150 | 1050 | 985 |
2 | 720 | 625 | 525 | – | – | – | 920 | 835 | 755 | – | – | – | 820 | 705 | 590 | 985 | 885 | 720 | |
3 | 655 | 560 | 460 | – | – | – | 835 | 755 | 675 | – | – | – | 755 | 640 | 525 | 920 | 785 | 640 | |
4 | 590 | 490 | 395 | – | – | – | 740 | 605 | 525 | – | – | – | 675 | 560 | 445 | 785 | 675 | 540 | |
5 | 490 | 445 | 395 | – | – | – | 625 | 560 | 490 | – | – | – | 560 | 510 | 445 | 655 | 590 | 525 | |
6 | 425 | 330 | 260 | – | – | – | 525 | 445 | 360 | – | – | – | 490 | 375 | 295 | 590 | 460 | 330 | |
M | 1 | 560 | 490 | 445 | – | – | – | 675 | 605 | 510 | – | – | – | 640 | 560 | 510 | 855 | 690 | 605 |
2 | 510 | 425 | 360 | – | – | – | 605 | 525 | 460 | – | – | – | 575 | 490 | 410 | 770 | 590 | 475 | |
3 | 375 | 330 | 260 | – | – | – | 475 | 425 | 375 | – | – | – | 425 | 375 | 295 | 575 | 475 | 360 | |
K | 1 | – | – | – | 1380 | 1265 | 1115 | 970 | 870 | 785 | 1180 | 950 | 805 | – | – | – | – | – | – |
2 | – | – | – | 1100 | 970 | 900 | 770 | 690 | 625 | 920 | 755 | 640 | – | – | – | – | – | – | |
3 | – | – | – | 920 | 820 | 755 | 640 | 575 | 525 | 690 | 575 | 460 | – | – | – | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | 115 | 100 | 80 | – | – | – | – | – | – | – | – | – | 130 | 115 | 100 | 165 | 130 | 80 |
2 | 115 | 100 | 80 | – | – | – | – | – | – | – | – | – | 130 | 115 | 100 | 180 | 130 | 80 | |
3 | 150 | 115 | 80 | – | – | – | – | – | – | – | – | – | 165 | 130 | 100 | 215 | 150 | 100 | |
4 | 165 | 150 | 100 | – | – | – | 165 | 150 | 115 | – | – | – | 180 | 165 | 115 | 245 | 195 | 130 | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
Recommended Starting Speeds [SFM]
Material Group | KC725M | KCSM40 | |||||
P | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
5 | 390 | 355 | 315 | 820 | 450 | 410 |
|
6 | 340 | 265 | 210 | 740 | 415 | 375 |
M | 1 | 450 | 390 | 355 | 885 | 415 | 375 |
|
2 | 410 | 340 | 290 | 885 | 415 | 375 |
|
3 | 300 | 265 | 210 | 655 | 290 | 260 |
K | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
N | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
S | 1 | 90 | 80 | 65 | 195 | 90 | 75 |
|
2 | 90 | 80 | 65 | 165 | 90 | 70 |
|
3 | 120 | 90 | 65 | 180 | 105 | 80 |
|
4 | 145 | 120 | 80 | 260 | 150 | 115 |
H | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
Önerilen başlangıç hızları [m/dk.]
HARVI™ Ultra 8X • Recommended Starting Speed [m/min] | |||||||||||||||||||
Grade | KC725M | KCK15 | KCPK30 | KCK20B | KCPM40 | KCSM40 | |||||||||||||
Chip Thickness hex mm | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | |||||||
Material Group | Max | Start | Min | Max | Start | Min | Max | Start | Min | Max | Start | Min | Max | Start | Min | Max | Start | Min | |
P | 1 | 260 | 230 | 215 | – | – | – | 455 | 395 | 370 | – | – | – | 295 | 260 | 245 | 350 | 320 | 300 |
2 | 220 | 190 | 160 | – | – | – | 280 | 255 | 230 | – | – | – | 250 | 215 | 180 | 300 | 270 | 220 | |
3 | 200 | 170 | 140 | – | – | – | 255 | 230 | 205 | – | – | – | 230 | 195 | 160 | 280 | 240 | 195 | |
4 | 180 | 150 | 120 | – | – | – | 225 | 185 | 160 | – | – | – | 205 | 170 | 135 | 240 | 205 | 165 | |
5 | 150 | 135 | 120 | – | – | – | 190 | 170 | 150 | – | – | – | 170 | 155 | 135 | 200 | 180 | 160 | |
6 | 130 | 100 | 80 | – | – | – | 160 | 135 | 110 | – | – | – | 150 | 115 | 90 | 180 | 140 | 100 | |
M | 1 | 170 | 150 | 135 | – | – | – | 205 | 185 | 155 | – | – | – | 195 | 170 | 155 | 260 | 210 | 185 |
2 | 155 | 130 | 110 | – | – | – | 185 | 160 | 140 | – | – | – | 175 | 150 | 125 | 235 | 180 | 145 | |
3 | 115 | 100 | 80 | – | – | – | 145 | 130 | 115 | – | – | – | 130 | 115 | 90 | 175 | 145 | 110 | |
K | 1 | – | – | – | 420 | 385 | 340 | 295 | 265 | 240 | 360 | 290 | 245 | – | – | – | – | – | – |
2 | – | – | – | 335 | 295 | 275 | 235 | 210 | 190 | 280 | 230 | 195 | – | – | – | – | – | – | |
3 | – | – | – | 280 | 250 | 230 | 195 | 175 | 160 | 210 | 175 | 140 | – | – | – | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | 35 | 30 | 25 | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | 50 | 40 | 25 |
2 | 35 | 30 | 25 | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | 55 | 40 | 25 | |
3 | 45 | 35 | 25 | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | 65 | 45 | 30 | |
4 | 50 | 45 | 30 | – | – | – | 50 | 45 | 35 | – | – | – | 55 | 50 | 35 | 75 | 60 | 40 | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
Önerilen başlangıç hızları [m/dk.]
Material Group | KC725M | KCSM40 | |||||
P | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
5 | 120 | 110 | 95 | 250 | 138 | 125 |
|
6 | 105 | 80 | 65 | 225 | 127 | 115 |
M | 1 | 135 | 120 | 110 | 270 | 127 | 115 |
|
2 | 125 | 105 | 90 | 270 | 127 | 115 |
|
3 | 90 | 80 | 65 | 200 | 88 | 80 |
K | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
N | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
S | 1 | 30 | 25 | 20 | 60 | 25 | 23 |
|
2 | 30 | 25 | 20 | 50 | 23 | 21 |
|
3 | 35 | 30 | 20 | 55 | 26 | 24 |
|
4 | 45 | 35 | 25 | 80 | 39 | 35 |
H | 1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|