Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip, daha çok frezeleyin. Şimdi Satın Alın.

5720 Series • Two Cutting Edges • Ap1 max 16mm

Filtreleri Seçin
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • K Cast Iron (44)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (44)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (44)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (44)
  • N Non-Ferrous Materials (44)
    • N1
      Wrought Aluminum (44)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (44)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (44)
Applications
Applications
  • Face Milling Face Milling (29)
  • Pocket Pocket (4)
  • Pocket Helical Pocket Helical (3)
  • Pocket Milling Pocket Milling (29)
  • Profile Milling Profile Milling (29)
  • Ramping Ramping (29)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (29)
  • Shoulder Milling Shoulder Milling (29)
  • Shoulder Roughing Shoulder Roughing (29)
  • Shoulder Square End Shoulder Square End (29)
  • Slot Milling Slot Milling (25)
  • Slot Side Slot Side (25)
  • Slot Square End Slot Square End (29)
  • Slot T Slot T (25)
Cutting Diameter
Cutting Diameter
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.25 in (3)
  • 1.26 in (5)
  • 1.5 in (1)
  • 1.575 in (2)
  • 1.969 in (3)
  • 2.0 in (3)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (3)
  • 3.15 in (2)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 31.75 mm (3)
  • 32.0 mm (5)
  • 38.1 mm (1)
  • 40.0 mm (2)
  • 50.0 mm (3)
  • 50.801 mm (3)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (3)
  • 80.0 mm (2)
Cutting Diameter Min - Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.401 mm (1)
  • 38.1 mm (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.0 in (1)
  • 1.5 in (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 16.0 mm (31)
Cutting Length Min - Cutting Length Max
Cutting Length
Cutting Length
  • 0.63 in (31)
Cutting Length Min - Cutting Length Max
Reach
Reach
  • 1.575 in (3)
  • 1.772 in (5)
  • 1.967 in (1)
  • 1.969 in (11)
  • 2.0 in (2)
  • 2.75 in (1)
  • 2.953 in (7)
  • 3.0 in (1)
Reach Min - Reach Max
Reach
Reach
  • 40.0 mm (3)
  • 45.0 mm (5)
  • 49.95 mm (1)
  • 50.0 mm (11)
  • 50.801 mm (2)
  • 69.851 mm (1)
  • 75.0 mm (7)
  • 76.2 mm (1)
Reach Min - Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (31)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (16)
  • HSK (4)
  • Screw-On Connection (6)
  • Straight-Cylindrical (5)
Number of Flutes
Number of Flutes
  • 2 (8)
  • 3 (11)
  • 4 (8)
  • 5 (4)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (3)
  • 1.772 in (5)
  • 1.969 in (6)
  • 2.0 in (2)
  • 2.835 in (2)
  • 2.872 in (1)
  • 2.874 in (3)
  • 5.03 in (1)
  • 5.157 in (1)
  • 5.232 in (1)
  • 5.236 in (3)
  • 5.28 in (1)
  • 5.315 in (2)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (3)
  • 45.0 mm (5)
  • 50.0 mm (6)
  • 50.801 mm (2)
  • 72.0 mm (2)
  • 72.95 mm (1)
  • 73.0 mm (3)
  • 127.75 mm (1)
  • 131.0 mm (1)
  • 132.9 mm (1)
  • 133.0 mm (3)
  • 134.1 mm (1)
  • 135.0 mm (2)
Over All Length [L] Min - Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.012 in (32)
  • 0.016 in (32)
  • 0.031 in (32)
  • 0.049 in (32)
  • 0.066 in (32)
  • 0.083 in (32)
  • 0.103 in (33)
  • 0.122 in (33)
  • 0.13 in (32)
  • 0.161 in (31)
  • 0.206 in (32)
  • 0.244 in (32)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.301 mm (32)
  • 0.4 mm (32)
  • 0.8 mm (32)
  • 1.25 mm (32)
  • 1.675 mm (32)
  • 2.1 mm (32)
  • 2.6 mm (33)
  • 3.1 mm (33)
  • 3.301 mm (32)
  • 4.101 mm (31)
  • 5.2 mm (32)
  • 6.2 mm (32)
Corner Radius Min - Corner Radius Max
application
Hand Of Tool
Hand Of Tool
  • R (31)
Wiper Insert
Wiper Insert
  • N (13)
Maximum Ramp Angle
Maximum Ramp Angle
  • 4.4 (2)
  • 4.6 (3)
  • 5.8 (2)
  • 5.9 (2)
  • 7.5 (2)
  • 7.6 (1)
  • 7.8 (4)
  • 7.9 (1)
  • 8.1 (1)
  • 11.4 (5)
  • 11.5 (3)
  • 14.5 (3)
  • 14.7 (2)
Maximum Ramp Angle Min - Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.906 in (1)
  • 0.946 in (1)
  • 0.961 in (1)
  • 1.137 in (1)
  • 1.176 in (1)
  • 1.18 in (1)
  • 1.22 in (1)
  • 1.43 in (1)
Neck Diameter Min - Neck Diameter Max
Neck Diameter
Neck Diameter
  • 23.0 mm (1)
  • 24.0 mm (1)
  • 24.401 mm (1)
  • 28.875 mm (1)
  • 29.875 mm (1)
  • 29.975 mm (1)
  • 31.0 mm (1)
  • 36.325 mm (1)
Neck Diameter Min - Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • Z-PARALLELOGRAM 89.27 (13)
Cutting Edge Length
Cutting Edge Length
  • 16.375 mm (7)
  • 16.401 mm (5)
  • 16.45 mm (1)
Cutting Edge Length Min - Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.645 in (7)
  • 0.646 in (5)
  • 0.648 in (1)
Cutting Edge Length Min - Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 721 (13)
Cutting Tool Material
Cutting Tool Material
  • H W (13)
Tolerance Class
Tolerance Class
  • E (13)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (5)
  • SCREW-ON (6)
  • SHELL MILL (16)
  • TAPER SHANK (4)
System Size
System Size
  • HSK63A (4)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (2)
  • 19.1 mm (1)
  • 21.0 mm (2)
  • 22.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (6)
  • 27.0 mm (2)
  • 29.0 mm (4)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 63.0 mm (4)
Back-End Diameter Min - Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (1)
  • 0.75 in (2)
  • 0.752 in (1)
  • 0.828 in (2)
  • 0.866 in (4)
  • 0.984 in (1)
  • 1.0 in (6)
  • 1.063 in (2)
  • 1.143 in (4)
  • 1.25 in (1)
  • 1.26 in (2)
  • 2.48 in (4)
Back-End Diameter Min - Back-End Diameter Max
No filters matching ""

Cutters 5720 • Metric

(17) Cutters 5720 • Metric

Cutters 5720 • Inch

(14) Cutters 5720 • Inch

Inserts 5720

(13) Inserts 5720
öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
product-image
Please adjust the following properties from

ISO Katalog Numarası

ANSI Katalog Numarası

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Pano bilgilerinizi görmek için oturum açmalısınız
Session expired due to inactivity, please login again
Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Katalog Numarası Kalite    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Başarılı kaydınız için teşekkür ederiz. Artık hemen giriş yapabilir ve siteyi kullanabilirsiniz.

You are about to leave the Solution building process.

Are you sure you want to leave?