Tırtıklı arayüzlü modüler delik işleme baraları

Bu delik genişletme baralarında, baraya tırtıklı bir tasarımla bağlanan yeni vida bağlamalı kafaları içeren bir ürün programı kullanılmaktadır.

  • Kısa tasarımlı vida bağlamalı kafalar düşük ağırlık ve bu sayede yüksek sürdürülebilir sağlamlık ve tutarlı tekrarlanabilirlik sağlar.
  • Tırtıklı tasarımlı arabirim sayesinde daha yüksek bağlantı kuvvetlerine erişerekkesici uç konumlandırmada daha yüksek hassasiyette doğruluk sağlar.
  • Titreşimsiz delik işleme baraları 10xD’ye kadar uzatılmış bağlama boyu sayesinde delik işlemede kararlılık ve sürdürülebilir sağlamlık sağlar.
  • Titreşimsiz delik işleme baraları, elle ayarlama gerektirmeyen ya da yapılmasına gerek olmadan kutudan çıktığı gibi kullanılabilecek şekilde tasarlanmış olup, tak ve kullan özellikli bir çözümdür. Tümleşik sönümleme özellikli uç yuvası, baranın dayanıklılığı artırarak ve ayrıca tırlamadan kaynaklanan titreşimi sönümleyerek, iş sürecinde kararlılık sağlamak üzere tasarlanmıştır.
Filtreleri Seçin
Filters
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (104)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (104)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (104)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (104)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (104)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (104)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (104)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (104)
  • M Stainless Steel (104)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (104)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (104)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (104)
  • K Cast Iron (104)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (104)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (104)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (104)
  • N Non-Ferrous Materials (103)
    • N1
      Wrought Aluminum (103)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (103)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (73)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (103)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (103)
    • N6
      Carbon, Graphite Composites, CFRP (103)
    • N7
      MMC's (99)
  • S High-Temp Alloys (104)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (104)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (104)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (104)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (104)
  • H Hardened Materials (93)
    • H1
      Hardened Materials 44-48 HRC (93)
    • H2
      Hardened Materials 48-55 HRC (86)
    • H3
      Hardened Materials 56-60 HRC (86)
    • H4
      Hardened Materials >60 HRC (76)
  • C CFRP Materials (86)
    • C1
      CFRP, CFRP / CFRP (86)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (82)
Applications
Applications
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (11)
  • TRN Boring TRN Boring (11)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (16)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (97)
  • Interrupted (46)
  • Lightly Interrupted Cut (97)
  • Smooth Cut (97)
  • Varying Depth of Cut (97)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 62.5 (2)
  • 90.0 (34)
  • 93.0 (34)
  • 95.0 (32)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (104)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (68)
  • 2.0 (73)
  • 3.0 (27)
  • 4.0 (46)
  • 6.0 (14)
  • 8.0 (24)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 0.696 in (12)
  • 0.734 in (2)
  • 0.892 in (6)
  • 0.971 in (4)
  • 0.994 in (1)
  • 1.01 in (2)
  • 1.049 in (2)
  • 1.246 in (6)
  • 1.27 in (3)
  • 1.285 in (12)
  • 1.348 in (4)
  • 1.364 in (14)
  • 1.389 in (7)
  • 1.405 in (24)
  • 1.463 in (1)
  • 1.522 in (3)
  • 1.561 in (1)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 17.651 mm (12)
  • 18.651 mm (2)
  • 22.651 mm (6)
  • 24.651 mm (4)
  • 25.25 mm (1)
  • 25.651 mm (2)
  • 26.651 mm (2)
  • 31.651 mm (6)
  • 32.25 mm (3)
  • 32.65 mm (12)
  • 34.25 mm (4)
  • 34.65 mm (14)
  • 35.25 mm (7)
  • 35.65 mm (24)
  • 37.15 mm (1)
  • 38.651 mm (3)
  • 39.651 mm (1)
Over All Length [L] Min - Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (14)
  • 0.002 in (40)
  • 0.003 in (14)
  • 0.004 in (76)
  • 0.005 in (8)
  • 0.006 in (14)
  • 0.007 in (10)
  • 0.008 in (80)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (10)
  • 0.014 in (18)
  • 0.016 in (93)
  • 0.017 in (2)
  • 0.019 in (10)
  • 0.02 in (8)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.027 in (1)
  • 0.028 in (4)
  • 0.031 in (92)
  • 0.033 in (1)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.039 in (9)
  • 0.047 in (84)
  • 0.049 in (8)
  • 0.06 in (8)
  • 0.062 in (20)
  • 0.063 in (56)
  • 0.069 in (8)
  • 0.078 in (8)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (8)
  • 0.095 in (30)
  • 0.098 in (2)
  • 0.125 in (4)
  • 0.126 in (8)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (14)
  • 0.05 mm (40)
  • 0.076 mm (14)
  • 0.1 mm (76)
  • 0.125 mm (8)
  • 0.151 mm (14)
  • 0.176 mm (10)
  • 0.2 mm (80)
  • 0.225 mm (8)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (10)
  • 0.325 mm (10)
  • 0.351 mm (18)
  • 0.4 mm (93)
  • 0.426 mm (2)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (8)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.65 mm (1)
  • 0.701 mm (4)
  • 0.775 mm (8)
  • 0.8 mm (84)
  • 0.826 mm (1)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 1.0 mm (9)
  • 1.201 mm (84)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (20)
  • 1.6 mm (56)
  • 1.75 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (8)
  • 2.401 mm (30)
  • 2.5 mm (2)
  • 3.176 mm (4)
  • 3.2 mm (8)
Corner Radius Min - Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (46)
  • 241 (12)
  • CL4 (32)
  • CM2 (44)
  • CM3 (34)
  • CM4 (28)
  • CPX (42)
  • CW2 (30)
  • GH1 (8)
  • GX (16)
  • HT2 (54)
  • HTX (50)
  • K00331 (4)
  • K060 (24)
  • K090 (46)
  • K1 (16)
  • K1010P (8)
  • K10M (74)
  • K10P (60)
  • K10U (66)
  • K15U (66)
  • K20K (66)
  • K21 (26)
  • K25M (60)
  • K25P (52)
  • K2885 (8)
  • K313 (92)
  • K35P (28)
  • K420 (49)
  • K45 (30)
  • K4H (8)
  • K68 (91)
  • KB1340 (16)
  • KB1345 (48)
  • KB1610 (50)
  • KB1625 (44)
  • KB1630 (44)
  • KB5610 (44)
  • KB5625 (62)
  • KB5630 (38)
  • KB9610 (62)
  • KB9640 (16)
  • KBH10 (60)
  • KBH10B (36)
  • KBH20 (65)
  • KBH20B (36)
  • KBK35 (12)
  • KC210 (26)
  • KC250 (32)
  • KC5010 (101)
  • KC5020P (18)
  • KC5025 (102)
  • KC5410 (86)
  • KC5510 (52)
  • KC5525 (30)
  • KC710 (28)
  • KC720 (82)
  • KC722 (26)
  • KC730 (95)
  • KC7310 (54)
  • KC732 (74)
  • KC8050 (84)
  • KC810 (91)
  • KC850 (95)
  • KC9010 (72)
  • KC9025 (86)
  • KC910 (84)
  • KC9105 (83)
  • KC9110 (96)
  • KC9120 (78)
  • KC9125 (86)
  • KC9140 (54)
  • KC9145 (36)
  • KC9210 (8)
  • KC9215 (54)
  • KC9225 (86)
  • KC9240 (84)
  • KC9240NEW (84)
  • KC9245 (54)
  • KC9315 (86)
  • KC9320 (92)
  • KC9325 (72)
  • KC935 (96)
  • KC950 (82)
  • KC990 (76)
  • KCD25 (28)
  • KCK05 (86)
  • KCK05B (74)
  • KCK15 (76)
  • KCK15B (82)
  • KCK20 (94)
  • KCK20B (92)
  • KCM15 (84)
  • KCM15B (78)
  • KCM25 (86)
  • KCM25B (82)
  • KCM35 (76)
  • KCM35B (58)
  • KCP05 (80)
  • KCP05B (52)
  • KCP10 (86)
  • KCP10B (94)
  • KCP15 (4)
  • KCP25 (86)
  • KCP25B (94)
  • KCP25C (84)
  • KCP30 (84)
  • KCP30B (50)
  • KCP40 (42)
  • KCP40B (54)
  • KCPK05 (50)
  • KCS10 (44)
  • KCS10B (78)
  • KCU10 (97)
  • KCU10B (86)
  • KCU25 (93)
  • KCU25B (84)
  • KD050 (47)
  • KD081 (52)
  • KD100 (31)
  • KD120 (40)
  • KD1400 (56)
  • KD1405 (22)
  • KD1425 (64)
  • KM1 (24)
  • KMF (12)
  • KS15 (12)
  • KT1120 (16)
  • KT125 (46)
  • KT150 (28)
  • KT175 (68)
  • KT315 (88)
  • KT325 (64)
  • KT5020 (14)
  • KTP10 (70)
  • KU10 (24)
  • KU10T (84)
  • KU25T (14)
  • KU30T (92)
  • KY1310 (30)
  • KY1320 (46)
  • KY1540 (18)
  • KY1615 (46)
  • KY2000 (32)
  • KY2100 (14)
  • KY3000 (56)
  • KY3400 (34)
  • KY3500 (46)
  • KY4000 (22)
  • KY4300 (22)
  • KY4400 (46)
  • KYHK15B (46)
  • KYK10 (24)
  • KYK25 (34)
  • KYK35 (46)
  • KYS25 (16)
  • KYS30 (16)
  • NL200 (20)
  • NL250 (50)
  • NL300 (42)
  • NL400 (20)
  • NL920 (38)
  • P25 (14)
  • PS5 (24)
  • SP0819 (40)
  • SP3019 (32)
  • SP4019 (28)
  • SP4036 (4)
  • SP4093 (4)
  • SPADAP (2)
  • TN7035 (10)
  • X00511 (12)
  • X00580 (12)
  • X00581 (12)
  • X00582 (12)
  • X00583 (12)
  • X00584 (12)
  • X00585 (12)
  • X00586 (12)
  • X00591 (12)
  • X00592 (12)
  • X00593 (12)
  • X00594 (12)
  • X00596 (12)
  • X00597 (12)
  • X00599 (12)
  • YY3A00 (2)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (57)
Wiper Insert
Wiper Insert
  • N (104)
  • Y (44)
F Dimension
F Dimension
  • 17.0 mm (20)
  • 18.276 mm (1)
  • 22.0 mm (21)
  • 23.0 mm (2)
  • 23.276 mm (1)
  • 27.0 mm (27)
  • 28.276 mm (1)
  • 28.675 mm (1)
  • 35.0 mm (27)
  • 36.275 mm (1)
  • 36.676 mm (1)
  • 36.975 mm (1)
F Dimension Min - F Dimension Max
F Dimension
F Dimension
  • 0.669 in (20)
  • 0.72 in (1)
  • 0.866 in (21)
  • 0.906 in (2)
  • 0.916 in (1)
  • 1.063 in (27)
  • 1.113 in (1)
  • 1.129 in (1)
  • 1.379 in (27)
  • 1.428 in (1)
  • 1.444 in (1)
  • 1.456 in (1)
F Dimension Min - F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (19)
  • 33.0 mm (2)
  • 40.0 mm (24)
  • 50.0 mm (29)
  • 63.0 mm (30)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (19)
  • 1.299 in (2)
  • 1.575 in (24)
  • 1.969 in (29)
  • 2.48 in (30)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min - Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min - Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (32)
  • E (52)
  • P (2)
  • S (18)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (61)
  • NEGATIVE-ZERO (30)
  • NEUTRAL (ZERO) (13)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (21)
  • 5.039 in (24)
  • 6.299 in (29)
  • 7.875 in (30)
Maximum Bore Depth Min - Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (21)
  • 128.0 mm (24)
  • 160.0 mm (29)
  • 200.0 mm (30)
Maximum Bore Depth Min - Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (104)
frontEnd
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (1)
Clamp Style
Clamp Style
  • D (28)
  • N (11)
  • P (26)
  • S (39)
Cutting Width
Cutting Width
  • 0.039 in (8)
  • 0.047 in (8)
  • 0.06 in (8)
  • 0.062 in (8)
  • 0.069 in (8)
  • 0.073 in (8)
  • 0.078 in (8)
  • 0.079 in (8)
  • 0.088 in (8)
  • 0.089 in (5)
  • 0.094 in (3)
  • 0.095 in (8)
  • 0.097 in (8)
  • 0.098 in (8)
  • 0.105 in (8)
  • 0.108 in (8)
  • 0.11 in (8)
  • 0.119 in (10)
  • 0.122 in (8)
  • 0.125 in (10)
  • 0.126 in (10)
  • 0.128 in (8)
  • 0.131 in (3)
  • 0.138 in (10)
  • 0.143 in (8)
  • 0.156 in (8)
  • 0.157 in (10)
  • 0.167 in (10)
  • 0.169 in (8)
  • 0.177 in (10)
  • 0.178 in (8)
  • 0.185 in (9)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (8)
  • 0.197 in (2)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.218 in (1)
  • 0.219 in (2)
  • 0.237 in (2)
  • 0.25 in (3)
  • 0.255 in (2)
  • 0.281 in (1)
  • 0.312 in (1)
  • 0.375 in (1)
  • 0.383 in (1)
Cutting Width Min