successfully added to cart
View Cart

Notifications

Mark all as read
Fraises à grande avance
Fraises à grande avance
Fraises à grande avance
Fraises à grande avance

7792VXD12 Fraise à tenons - Pas grand, moyen et fin • Métrique

Fraises à grande avance

Features and benefits

  • De nouvelles fraises à pas ultra fin sont proposées pour augmenter le débit-copeau, en particulier dans les alliages hautes températures.

  • Géométrie de coupe positive pour des efforts de coupe réduits permettant l'utilisation en cas de porte-à-faux important.

  • Permettent le fraisage en ramping et en plongée.

Uses and application

  • SurfaçageSurfaçage
  • Ramping : ÉbaucheRamping : Ébauche
  • Fraisage hélicoïdalFraisage hélicoïdal
  • Usinage de pochesUsinage de poches
  • Fraisage en plongée : Bout hémisphériqueFraisage en plongée : Bout hémisphérique
  • LamageLamage
  • Slotting: ShoulderSlotting: Shoulder
  • Spiral CircularSpiral Circular
  • Inclined Square End MillInclined Square End Mill
  • Fraisage —  Arrosage interneFraisage — Arrosage interne
  • Fraisage —  3 taillesFraisage — 3 tailles

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
 S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
Select First Choice
  • DE (21)
  • GB (15)
  • IN (2)
  • SG (1)
  • US (4)
Applications
Applications
  • Face Milling Face Milling (4)
  • Pocket Pocket (4)
  • Pocket Helical Pocket Helical (4)
  • Pocket Milling Pocket Milling (4)
  • Pocket Plunge Milling Pocket Plunge Milling (4)
  • Profile Milling Profile Milling (4)
  • Ramping Ramping (4)
  • Slot Milling Slot Milling (4)
  • Slot Side Slot Side (4)
Cutting Diameter
Cutting Diameter
  • 1.323 in (2)
  • 2.425 in (1)
  • 5.575 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 33.6 mm (2)
  • 61.6 mm (1)
  • 141.6 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 51.8 mm (2)
  • 79.8 mm (1)
  • 160.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 2.0394 in (2)
  • 3.14 in (1)
  • 6.299 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Reach
Reach
  • 1.575 in (2)
  • 1.969 in (1)
  • 2.48 in (1)
Reach Min to Reach Max
Reach
Reach
  • 40.0 mm (2)
  • 50.0 mm (1)
  • 63.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 11.0 (1)
  • 15.0 (3)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (3)
  • SHCS or RetScrw Or BoltCircle (1)
Number of Flutes
Number of Flutes
  • 4 (1)
  • 5 (2)
  • 7 (1)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (4)
  • 0.0315 in (4)
  • 0.047 in (4)
  • 0.058 in (4)
  • 0.059 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.787 mm (4)
  • 0.8 mm (4)
  • 1.194 mm (4)
  • 1.2 mm (4)
  • 1.5 mm (4)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • GH2 (4)
  • KC510M (4)
  • KC522M (4)
  • KC725M (4)
  • KCK15 (4)
  • KCKP10 (4)
  • KCPK30 (4)
  • KCPM20 (4)
  • KCPM40 (4)
  • KCSM40 (4)
  • SC3025 (4)
  • SC6525 (4)
  • SP4659 (4)
  • SP6519 (4)
  • X400 (4)
  • X500 (4)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.2 (1)
  • 0.45 (1)
  • 0.8 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • S-SQUARE 90 (4)
  • X-PARALLELOGRAM 75 (4)
backEnd
Back-End Diameter
Back-End Diameter
  • 22.0 mm (2)
  • 27.0 mm (1)
  • 40.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.866 in (2)
  • 1.063 in (1)
  • 1.575 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • High-Feed Series
Displaying 1- 4 of 4 results
Select Columns
Select Filters
Metric
Inch
Show
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
5659130 7792VXD12-160Z7R 7792VXD12-160Z7R 160.0000 6.299 40.0 1.575 141.6000 5.575 110.0000 4.331 63.0000 2.480 2.5000 .0980 7  
    List price:
    $963.43 /each.
    Your price::
    Qty
    5666187 7792VXD12-A052Z4R 7792VXD12-A052Z4R   51.8000 2.039 22.0 .866 33.6000 1.323 47.5000 1.870 40.0000 1.575 2.5000 .0980 4
      List price:
      $561.89 /each.
      Your price::
      Qty
      5656383 7792VXD12-A052Z5R 7792VXD12-A052Z5R 51.8000 2.039 22.0 .866 33.6000 1.323 47.7300 1.879 40.0000 1.575 2.5000 .0980 5  
        List price:
        $769.40 /each.
        Your price::
        Qty
        5656730 7792VXD12-A080Z5R 7792VXD12-A080Z5R 79.8000 3.140 27.0 1.063 61.6000 2.425 54.8000 2.157 50.0000 1.969 2.5000 .0980 5  
          List price:
          $709.75 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          Grades

          product-image
          Please adjust the following properties from

          catalogue ISO

          catalogue ANSI

          to find similar products.
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          The following CAD files are available

          Please select a file to download

          You should be logged to see your dashboard information
          Session expired due to inactivity, please login again
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart