Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Filetage

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (4155)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4101)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4101)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4040)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3873)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2664)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2942)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2642)
  • M Stainless Steel (3995)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3995)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2895)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3748)
  • K Cast Iron (3711)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2794)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3695)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2778)
  • N Non-Ferrous Materials (1637)
    • N1
      Wrought Aluminum
      (1462)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1460)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1161)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1450)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1125)
    • N6
      Carbon, Graphite Composites, CFRP
      (1109)
    • N7
      MMC's
      (1056)
  • S High-Temp Alloys (3236)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2804)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2803)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2803)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2721)
  • H Hardened Materials (1359)
    • H1
      Hardened Materials 44-48 HRC
      (1346)
    • H2
      Hardened Materials 48-55 HRC
      (232)
    • H3
      Hardened Materials 56-60 HRC
      (157)
    • H4
      Hardened Materials >60 HRC
      (157)
Select First Choice
  • CN (89)
  • DE (243)
  • GB (52)
  • IN (5)
  • US (359)
Applications
  • Back Boring Back Boring (8)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (3)
  • Blind Hole Finishing Blind Hole Finishing (3)
  • CRT Boring CRT Boring (3)
  • CRT Profiling CRT Profiling (3)
  • Chamfer Milling Chamfer Milling (206)
  • Chamfer Turning Chamfer Turning (6)
  • Countersinking Countersinking (195)
  • Cut-Off Cut-Off (393)
  • Deep Grooving Deep Grooving (393)
  • Drilling Drilling (192)
  • Face Grooving Face Grooving (393)
  • Face Milling Face Milling (206)
  • Facing Facing (8)
  • Flat Bottom Drilling Flat Bottom Drilling (168)
  • Grooving Grooving (393)
  • ID Facing ID Facing (393)
  • ID Grooving ID Grooving (393)
  • ID Thread Turning ID Thread Turning (1611)
  • Multiple Direction Cutting Multiple Direction Cutting (385)
  • OD Thread Turning OD Thread Turning (1765)
  • Pipe Thread Pipe Thread (3459)
  • Plunge Turning Plunge Turning (6)
  • Pocket Pocket (203)
  • Pocket Helical Pocket Helical (203)
  • Pocket Milling Pocket Milling (203)
  • Pocket Plunge Milling Pocket Plunge Milling (203)
  • Pre-Condition Pre-Condition (3087)
  • Profile Milling Profile Milling (203)
  • Profiling Profiling (393)
  • Ramping Ramping (203)
  • Shoulder Ball Nose Shoulder Ball Nose (203)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (203)
  • Shoulder Milling Shoulder Milling (206)
  • Shoulder Roughing Shoulder Roughing (203)
  • Shoulder Square End Shoulder Square End (203)
  • Slot Ball Nose Slot Ball Nose (203)
  • Slot Milling Slot Milling (203)
  • Slot Side Slot Side (203)
  • Slot Square End Slot Square End (203)
  • Slot T Slot T (168)
  • TRN Boring TRN Boring (393)
  • Tapping Blind Hole Tapping Blind Hole (3256)
  • Tapping Through Hole Tapping Through Hole (3256)
  • Thread Milling Thread Milling (203)
  • Threading Threading (3873)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (3)
  • Through Hole Finishing Through Hole Finishing (3)
  • Turning Turning (390)
Cutting Diameter
  • 2.4 (1)
  • 3.15 (1)
  • 3.16 (1)
  • 3.35 (1)
  • 4.0 (1)
  • 4.04 (1)
  • 4.3 (1)
  • 4.7 (1)
  • 4.8 (3)
  • 5.0 (2)
  • 5.05 (1)
  • 5.9 (1)
  • 6.0 (2)
  • 6.15 (1)
  • 6.5 (2)
  • 6.7 (1)
  • 6.75 (1)
  • 7.65 (1)
  • 8.0 (2)
  • 8.2 (2)
  • 8.4 (2)
  • 8.7 (2)
  • 8.992 (2)
  • 9.0 (3)
  • 9.9 (3)
  • 10.0 (5)
  • 10.1 (1)
  • 10.135 (1)
  • 10.15 (1)
  • 10.35 (1)
  • 10.4 (2)
  • 10.6 (1)
  • 11.4 (1)
  • 11.43 (2)
  • 11.5 (3)
  • 11.6 (3)
  • 11.8 (1)
  • 12.0 (3)
  • 12.1 (2)
  • 13.1 (1)
  • 13.5 (1)
  • 13.6 (3)
  • 14.0 (5)
  • 14.1 (1)
  • 14.7 (1)
  • 14.732 (1)
  • 14.75 (1)
  • 15.0 (2)
  • 15.1 (1)
  • 15.45 (2)
  • 15.494 (2)
  • 15.5 (2)
  • 16.0 (4)
  • 17.0 (5)
  • 17.018 (2)
  • 17.2 (1)
  • 17.3 (1)
  • 19.0 (1)
  • 19.05 (2)
  • 20.0 (4)
  • 20.066 (1)
  • 20.3 (1)
  • 20.37 (1)
  • 20.5 (2)
  • 20.6 (4)
  • 21.2 (2)
  • 22.0 (5)
  • 22.098 (1)
  • 22.1 (4)
  • 23.0 (1)
  • 23.1 (2)
  • 23.3 (1)
  • 24.5 (1)
  • 24.6 (1)
  • 25.0 (1)
  • 25.9 (2)
  • 26.0 (3)
  • 26.01 (1)
  • 26.39 (1)
  • 26.4 (1)
  • 29.972 (3)
  • 30.0 (15)
  • 31.0 (4)
  • 34.5 (1)
  • 35.0 (1)
  • 36.0 (4)
  • 36.1 (2)
  • 36.5 (1)
  • 36.6 (2)
  • 37.0 (3)
  • 37.084 (1)
  • 37.541 (1)
  • 39.1 (1)
  • 41.91 (1)
  • 42.0 (3)
  • 42.012 (1)
  • 42.926 (1)
  • 44.0 (2)
  • 46.0 (1)
  • 48.0 (2)
  • 49.0 (2)
  • 52.0 (2)
  • 53.086 (1)
  • 53.1 (1)
  • 56.0 (1)
  • 58.0 (1)
  • 58.9 (2)
  • 63.0 (1)
to
Cutting Diameter
  • 0.0945 (1)
  • 0.124 (1)
  • 0.1244 (1)
  • 0.1319 (1)
  • 0.1575 (1)
  • 0.1591 (1)
  • 0.1693 (1)
  • 0.185 (1)
  • 0.189 (3)
  • 0.1969 (2)
  • 0.1988 (1)
  • 0.2323 (1)
  • 0.2362 (2)
  • 0.2421 (1)
  • 0.2559 (2)
  • 0.2638 (1)
  • 0.2657 (1)
  • 0.3012 (1)
  • 0.315 (2)
  • 0.3228 (2)
  • 0.3307 (2)
  • 0.3425 (2)
  • 0.354 (2)
  • 0.3543 (3)
  • 0.3898 (3)
  • 0.39 (1)
  • 0.3937 (4)
  • 0.3976 (1)
  • 0.3996 (1)
  • 0.4075 (1)
  • 0.4094 (2)
  • 0.4173 (1)
  • 0.45 (3)
  • 0.4528 (2)
  • 0.453 (1)
  • 0.4567 (3)
  • 0.4646 (1)
  • 0.4724 (2)
  • 0.4764 (2)
  • 0.5157 (1)
  • 0.53 (1)
  • 0.535 (1)
  • 0.5354 (2)
  • 0.5512 (5)
  • 0.5551 (1)
  • 0.58 (2)
  • 0.581 (1)
  • 0.59 (1)
  • 0.5906 (1)
  • 0.594 (1)
  • 0.608 (1)
  • 0.6083 (1)
  • 0.61 (2)
  • 0.6102 (2)
  • 0.63 (4)
  • 0.6692 (1)
  • 0.6693 (2)
  • 0.67 (4)
  • 0.677 (1)
  • 0.68 (1)
  • 0.748 (1)
  • 0.75 (2)
  • 0.7874 (3)
  • 0.79 (1)
  • 0.7992 (1)
  • 0.802 (1)
  • 0.8071 (2)
  • 0.81 (4)
  • 0.835 (2)
  • 0.866 (2)
  • 0.8661 (3)
  • 0.87 (5)
  • 0.906 (1)
  • 0.91 (2)
  • 0.965 (1)
  • 0.97 (1)
  • 0.9843 (1)
  • 1.02 (2)
  • 1.0236 (1)
  • 1.024 (2)
  • 1.039 (1)
  • 1.0394 (1)
  • 1.1181 (1)
  • 1.18 (8)
  • 1.181 (4)
  • 1.1811 (5)
  • 1.22 (4)
  • 1.3583 (1)
  • 1.378 (1)
  • 1.417 (3)
  • 1.4173 (1)
  • 1.42 (2)
  • 1.437 (1)
  • 1.44 (2)
  • 1.4567 (3)
  • 1.46 (3)
  • 1.478 (1)
  • 1.54 (1)
  • 1.65 (1)
  • 1.6535 (2)
  • 1.654 (2)
  • 1.66 (2)
  • 1.69 (1)
  • 1.732 (2)
  • 1.811 (1)
  • 1.8898 (1)
  • 1.89 (1)
  • 1.93 (2)
  • 2.047 (2)
  • 2.09 (2)
  • 2.2047 (1)
  • 2.283 (1)
  • 2.32 (2)
  • 2.48 (1)
to
Cutting Length
  • 0.16 (2)
  • 0.2 (4)
  • 0.236 (5)
  • 0.2362 (2)
  • 0.24 (2)
  • 0.2457 (1)
  • 0.2756 (2)
  • 0.276 (4)
  • 0.28 (32)
  • 0.31 (70)
  • 0.3125 (18)
  • 0.313 (21)
  • 0.315 (9)
  • 0.32 (19)
  • 0.3244 (1)
  • 0.3437 (1)
  • 0.35 (15)
  • 0.354 (6)
  • 0.36 (40)
  • 0.37 (4)
  • 0.375 (53)
  • 0.38 (61)
  • 0.39 (105)
  • 0.3937 (4)
  • 0.394 (34)
  • 0.4 (6)
  • 0.4031 (1)
  • 0.4094 (2)
  • 0.41 (4)
  • 0.42 (2)
  • 0.4244 (1)
  • 0.43 (25)
  • 0.433 (6)
  • 0.4375 (20)
  • 0.438 (5)
  • 0.44 (82)
  • 0.45 (2)
  • 0.46 (14)
  • 0.47 (105)
  • 0.472 (1)
  • 0.4724 (9)
  • 0.48 (24)
  • 0.4866 (2)
  • 0.49 (68)
  • 0.5 (112)
  • 0.51 (86)
  • 0.5118 (1)
  • 0.512 (27)
  • 0.52 (9)
  • 0.53 (20)
  • 0.55 (18)
  • 0.551 (6)
  • 0.5512 (3)
  • 0.56 (32)
  • 0.561 (3)
  • 0.5625 (26)
  • 0.58 (12)
  • 0.59 (197)
  • 0.5906 (7)
  • 0.591 (37)
  • 0.6 (43)
  • 0.62 (4)
  • 0.625 (43)
  • 0.6255 (1)
  • 0.6299 (5)
  • 0.63 (124)
  • 0.6472 (1)
  • 0.6626 (2)
  • 0.669 (7)
  • 0.6693 (2)
  • 0.67 (10)
  • 0.68 (4)
  • 0.685 (8)
  • 0.6875 (44)
  • 0.688 (21)
  • 0.69 (49)
  • 0.7087 (4)
  • 0.709 (10)
  • 0.71 (123)
  • 0.74 (6)
  • 0.745 (6)
  • 0.748 (1)
  • 0.75 (158)
  • 0.77 (59)
  • 0.787 (16)
  • 0.79 (84)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.8268 (5)
  • 0.827 (2)
  • 0.83 (49)
  • 0.866 (21)
  • 0.8661 (1)
  • 0.87 (18)
  • 0.875 (72)
  • 0.88 (31)
  • 0.91 (46)
  • 0.935 (6)
  • 0.9375 (15)
  • 0.938 (14)
  • 0.94 (86)
  • 0.9449 (9)
  • 0.945 (6)
  • 0.9634 (1)
  • 0.9728 (1)
  • 0.98 (54)
  • 0.984 (3)
  • 0.994 (1)
  • 0.9976 (1)
  • 1.0 (117)
  • 1.02 (2)
  • 1.024 (2)
  • 1.031 (8)
  • 1.06 (7)
  • 1.0625 (19)
  • 1.063 (11)
  • 1.09 (47)
  • 1.0938 (1)
  • 1.094 (3)
  • 1.1 (3)
  • 1.102 (2)
  • 1.1024 (2)
  • 1.125 (56)
  • 1.14 (3)
  • 1.148 (1)
  • 1.18 (35)
  • 1.181 (4)
  • 1.1811 (1)
  • 1.2188 (1)
  • 1.219 (3)
  • 1.22 (19)
  • 1.25 (50)
  • 1.26 (4)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.3 (2)
  • 1.31 (2)
  • 1.34 (8)
  • 1.375 (18)
  • 1.38 (28)
  • 1.42 (4)
  • 1.4375 (21)
  • 1.4445 (1)
  • 1.46 (2)
  • 1.5 (9)
  • 1.5157 (2)
  • 1.5224 (1)
  • 1.57 (20)
  • 1.59 (1)
  • 1.6201 (1)
  • 1.6205 (1)
  • 1.65 (4)
  • 1.656 (6)
  • 1.6562 (43)
  • 1.6563 (17)
  • 1.71 (4)
  • 1.75 (12)
  • 1.77 (10)
  • 1.8125 (34)
  • 1.813 (3)
  • 1.89 (2)
  • 1.97 (8)
  • 2.0 (36)
  • 2.17 (2)
  • 2.2188 (16)
  • 2.219 (1)
  • 2.5 (16)
  • 2.5625 (8)
  • 2.563 (2)
  • 3.0 (11)
to
Cutting Length
  • 5.0 (4)
  • 6.0 (9)
  • 6.24 (1)
  • 7.0 (38)
  • 7.9 (37)
  • 7.938 (12)
  • 7.95 (21)
  • 8.0 (47)
  • 8.1 (13)
  • 8.2 (1)
  • 8.24 (1)
  • 8.73 (1)
  • 9.0 (23)
  • 9.1 (38)
  • 9.5 (4)
  • 9.525 (50)
  • 9.652 (4)
  • 9.7 (57)
  • 9.9 (8)
  • 10.0 (140)
  • 10.1 (1)
  • 10.24 (1)
  • 10.4 (2)
  • 10.41 (2)
  • 10.5 (2)
  • 10.78 (1)
  • 10.8 (2)
  • 10.9 (2)
  • 10.92 (3)
  • 10.922 (1)
  • 11.0 (27)
  • 11.1 (67)
  • 11.113 (13)
  • 11.125 (5)
  • 11.2 (15)
  • 11.5 (2)
  • 11.6 (13)
  • 11.7 (1)
  • 11.8 (13)
  • 11.9 (5)
  • 12.0 (99)
  • 12.1 (18)
  • 12.2 (6)
  • 12.36 (2)
  • 12.4 (64)
  • 12.5 (4)
  • 12.7 (106)
  • 13.0 (114)
  • 13.1 (4)
  • 13.2 (5)
  • 13.4 (20)
  • 14.0 (27)
  • 14.2 (32)
  • 14.249 (3)
  • 14.288 (18)
  • 14.8 (11)
  • 14.9 (3)
  • 14.986 (2)
  • 15.0 (214)
  • 15.011 (1)
  • 15.1 (53)
  • 15.2 (12)
  • 15.8 (4)
  • 15.875 (39)
  • 16.0 (122)
  • 16.002 (7)
  • 16.44 (1)
  • 16.83 (2)
  • 16.993 (2)
  • 17.0 (15)
  • 17.018 (2)
  • 17.3 (4)
  • 17.399 (8)
  • 17.463 (33)
  • 17.47 (1)
  • 17.475 (17)
  • 17.48 (3)
  • 17.5 (45)
  • 17.526 (4)
  • 18.0 (137)
  • 18.7 (4)
  • 18.9 (2)
  • 18.923 (6)
  • 19.0 (23)
  • 19.05 (80)
  • 19.1 (40)
  • 19.6 (59)
  • 20.0 (100)
  • 20.24 (1)
  • 20.46 (1)
  • 21.0 (49)
  • 21.1 (7)
  • 22.0 (40)
  • 22.098 (1)
  • 22.225 (59)
  • 22.3 (8)
  • 22.352 (1)
  • 22.4 (22)
  • 23.0 (18)
  • 23.1 (28)
  • 23.749 (6)
  • 23.813 (12)
  • 23.825 (14)
  • 23.876 (2)
  • 23.9 (45)
  • 24.0 (55)
  • 24.47 (1)
  • 24.71 (1)
  • 25.0 (57)
  • 25.34 (1)
  • 25.4 (96)
  • 25.908 (1)
  • 26.0 (3)
  • 26.19 (8)
  • 26.92 (4)
  • 26.924 (1)
  • 26.988 (14)
  • 27.0 (13)
  • 27.686 (2)
  • 27.7 (45)
  • 27.783 (1)
  • 27.788 (3)
  • 27.94 (1)
  • 28.0 (6)
  • 28.575 (37)
  • 29.0 (3)
  • 29.16 (1)
  • 30.0 (40)
  • 30.958 (1)
  • 30.963 (3)
  • 30.988 (2)
  • 31.0 (17)
  • 31.75 (41)
  • 31.8 (4)
  • 32.0 (4)
  • 32.16 (1)
  • 32.93 (1)
  • 33.0 (2)
  • 33.3 (2)
  • 34.0 (8)
  • 34.925 (7)
  • 34.93 (7)
  • 35.0 (28)
  • 36.0 (4)
  • 36.513 (14)
  • 36.69 (1)
  • 37.0 (2)
  • 38.0 (2)
  • 38.1 (7)
  • 38.5 (2)
  • 38.67 (1)
  • 40.0 (20)
  • 40.4 (1)
  • 41.15 (1)
  • 41.16 (1)
  • 42.0 (4)
  • 42.062 (6)
  • 42.067 (43)
  • 42.069 (8)
  • 43.5 (4)
  • 44.45 (10)
  • 45.0 (10)
  • 46.038 (29)
  • 46.05 (3)
  • 48.0 (2)
  • 50.0 (8)
  • 50.8 (32)
  • 55.0 (2)
  • 56.356 (2)
  • 56.358 (10)
  • 56.363 (1)
  • 63.5 (12)
  • 65.088 (8)
  • 65.1 (2)
  • 76.2 (11)
to
Type of Thread
  • 55 (171)
  • 60 (644)
  • ACME (493)
  • API (311)
  • API BUTTRESS (53)
  • API RD (232)
  • BSPT (132)
  • BSW (480)
  • BUTTRESS (296)
  • G Internal Thread Parallel (15)
  • M (654)
  • M-Metric/ISO (1073)
  • MF (29)
  • NC/UNC (7)
  • NPS (29)
  • NPSF (1)
  • NPT (318)
  • NPT/ANPT (20)
  • NPTF (149)
  • National Pipe Thread (16)
  • National Pipe Thread Fuel (21)
  • RD DIN 405 (143)
  • STUB ACME (308)
  • TR DIN 103 (147)
  • UN (964)