Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences
Suggestions de produit
Product Family suggestions
Kennametal à votre service
Support Clients
Nouveau client
Êtes-vous un nouveau client de Kennametal ? Créez un compte et commencez.
Créer un compteBonjour, User Name
Votre compte sélectionné :
Il y a un problème avec votre compte. Veuillez contacter le service client.
Compte Client
Modifier le compte
Compte de livraison
Modifier le compte
- Tableau de bord
- Gérer les commandes
- Gérer les canaux
- Carnet d’adresses
-
Notifications
Mark all as read - Modifier le mot de passe
- Mon profil
- Se déconnecter
Article(s)
ajoutées avec succès au panier
Voir le panier
Voir le panier
Usinez plus pour moins cher avec nos promotions!
Achetez maintenant
Kennametal à votre service
Support Clients
Article(s)
ajoutées avec succès au panier
Voir le panier
Voir le panier
Édition de la Solution
Ajout de Solution
Nom de la Solution: {{SolutionName}}- Produits
- /
- Plaquettes KenTIP™ FS • DAL
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
Plaquettes KenTIP™ FS • DAL
Plaquettes KenTIP™ FS • DAL
Features and benefits
- Géométrie de pointe DAL pour empilements CFRP avec sortie dans les métaux non ferreux et les alliages hautes températures (CFRP-Al et CFRP-Ti)
- Géométrie à angle double avec angle de pointe de 128° et 155° pour éviter les bavures en sortie
- Le KCC10 (revêtement diamant) présente un parfait équilibre entre ténacité et résistance à l'usure par abrasion pour le perçage d'empilements CFRP.
- Le KN15 (non revêtu) permet un usinage économique des non ferreux ; les goujures ultra polies réduisent la tendance aux arêtes rapportées.
- Embouts avec trous d'arrosage interne
Uses and application
Drilling
Drilling: Stacked Plates
Lamage/Chanfreinage linéaire
Dimensions de l'outil : 2 goujures/2 listels/lubrifiant
| Tolerance • Inch | |
| D1 inch | tolerance k8 |
| 0.2362 | 0.0000/+0.0007 |
|
|
0.0000/+0.0009 |
|
|
0.0000/+0.0011 |
|
|
0.0000/+0.0013 |
| Tolerance • Metric | |
| D1 metric | tolerance k8 |
| 6 | 0,000/+0,018 |
|
|
0,000/+0,022 |
|
|
0,000/+0,027 |
|
|
0,000/+0,033 |
| Material
|
Cutting Speed
|
Metric | |||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||
| min | Starting Value | max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| P | 0 | 100 | 100 | 125 | mm/r | 0,13
|
0,14
|
0,15
|
0,19
|
0,21
|
0,21
|
0,30
|
0,34
|
| 1 | 90 | 100 | 110 | mm/r | 0,15
|
0,16
|
0,18
|
0,22
|
0,25
|
0,25
|
0,35
|
0,40
|
|
| 2 | 90 | 100 | 110 | mm/r | 0,15
|
0,16
|
0,18
|
0,22
|
0,25
|
0,25
|
0,35
|
0,40
|
|
| 3 | 80 | 95 | 110 | mm/r | 0,15
|
0,16
|
0,18
|
0,22
|
0,25
|
0,25
|
0,35
|
0,40
|
|
| 4 | 80 | 90 | 110 | mm/r | 0,15
|
0,16
|
0,18
|
0,22
|
0,25
|
0,25
|
0,35
|
0,40
|
|
| 5 | 60 | 80 | 90 | mm/r | 0,03
|
0,04
|
0,05
|
0,05
|
0,08
|
0,08
|
0,12
|
0,14
|
|
| 6 | 60 | 70 | 80 | mm/r | 0,03
|
0,04
|
0,05
|
0,05
|
0,08
|
0,08
|
0,12
|
0,14
|
|
| K | 1 | 80 | 100 | 120 | mm/r | 0,15
|
0,17
|
0,19
|
0,24
|
0,27
|
0,27
|
0,38
|
0,45
|
| 2 | 80 | 90 | 100 | mm/r | 0,15
|
0,16
|
0,18
|
0,22
|
0,25
|
0,25
|
0,35
|
0,40
|
|
| 3 | 60 | 90 | 120 | mm/r | 0,15
|
0,16
|
0,18
|
0,22
|
0,25
|
0,25
|
0,35
|
0,40
|
|
| Material
|
Cutting Speed
|
Inch | |||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||
| min | Starting Value | max | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | MISSING DATA | 5/8 | |||
| .125 | .188 | .250 | .313 | .375 | .500 | .551 | .625 | ||||||
| P | 0 | 330 | 330 | 410 | IPR | .005
|
.006
|
.006
|
.008
|
.008
|
.010
|
.012
|
.013
|
| 1 | 300 | 330 | 360 | IPR | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
|
| 2 | 300 | 330 | 360 | IPR | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
|
| 3 | 260 | 310 | 360 | IPR | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
|
| 4 | 260 | 300 | 360 | IPR | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
|
| 5 | 200 | 260 | 300 | IPR | .001
|
.002
|
.002
|
.002
|
.003
|
.004
|
.005
|
.006
|
|
| 6 | 200 | 230 | 260 | IPR | .001
|
.002
|
.002
|
.002
|
.003
|
.004
|
.005
|
.006
|
|
| K | 1 | 260 | 330 | 390 | IPR | .006
|
.007
|
.008
|
.009
|
.011
|
.013
|
.015
|
.018
|
| 2 | 260 | 300 | 330 | IPR | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
|
| 3 | 200 | 300 | 390 | IPR | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
|
| Feed rate (f) = IPR by diameter | |||||||||||
| Cutting Speed
|
1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 9/16 | 5/8 | |||
| Material
|
Min | Starting Value | Max | .125 | .188 | .250 | .313 | .375 | .500 | .551 | .625 |
| P | |||||||||||
| 0 | 330 | 330 | 410 | .005
|
.006
|
.006
|
.008
|
.008
|
.010
|
.012
|
.013
|
| 1 | 300 | 330 | 360 | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
| 2 | 300 | 330 | 360 | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
| 3 | 260 | 310 | 360 | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
| 4 | 260 | 300 | 360 | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
| 5 | 200 | 260 | 300 | .001
|
.002
|
.002
|
.002
|
.003
|
.004
|
.005
|
.006
|
| 6 | 200 | 230 | 260 | .001
|
.002
|
.002
|
.002
|
.003
|
.004
|
.005
|
.006
|
| K | |||||||||||
| 1 | 260 | 330 | 390 | .006
|
.007
|
.008
|
.009
|
.011
|
.013
|
.015
|
.018
|
| 2 | 260 | 300 | 330 | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
| 3 | 200 | 300 | 390 | .006
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.016
|
| Material
|
Cutting Speed
|
Inch | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| P | 0 | 315 | 415 | 575 | IPR | .004
|
.004
|
.005
|
.006
|
.007
|
.007
|
.009
|
.011
|
.011
|
| 1 | 300 | 430 | 560 | IPR | .004
|
.004
|
.005
|
.006
|
.007
|
.007
|
.009
|
.011
|
.011
|
|
| 2 | 330 | 460 | 590 | IPR | .004
|
.004
|
.005
|
.006
|
.007
|
.007
|
.009
|
.011
|
.011
|
|
| 3 | 200 | 330 | 430 | IPR | .004
|
.004
|
.005
|
.006
|
.006
|
.007
|
.009
|
.012
|
.012
|
|
| 4 | 200 | 330 | 430 | IPR | .004
|
.004
|
.005
|
.006
|
.006
|
.007
|
.009
|
.010
|
.010
|
|
| 5 | 200 | 260 | 330 | IPR | .004
|
.004
|
.004
|
.005
|
.006
|
.006
|
.008
|
.009
|
.010
|
|
| 6 | 200 | 230 | 260 | IPR | .004
|
.004
|
.004
|
.005
|
.006
|
.006
|
.008
|
.009
|
.010
|
|
| K | 1 | 260 | 400 | 560 | IPR | .005
|
.005
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.015
|
| 2 | 260 | 360 | 390 | IPR | .005
|
.005
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.015
|
|
| 3 | 160 | 260 | 330 | IPR | .004
|
.005
|
.005
|
.006
|
.007
|
.008
|
.011
|
.013
|
.013
|
|
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 95 | 125 | 175 | mm/r | 0,10
|
0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,24
|
0,28
|
0,29
|
| 1 | 90 | 130 | 170 | mm/r | 0,10
|
0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,24
|
0,28
|
0,29
|
|
| 2 | 100 | 140 | 180 | mm/r | 0,10
|
0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,24
|
0,28
|
0,29
|
|
| 3 | 60 | 100 | 130 | mm/r | 0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,18
|
0,23
|
0,30
|
0,31
|
|
| 4 | 60 | 100 | 130 | mm/r | 0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,18
|
0,23
|
0,25
|
0,26
|
|
| 5 | 60 | 80 | 100 | mm/r | 0,09
|
0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,20
|
0,24
|
0,25
|
|
| 6 | 60 | 70 | 80 | mm/r | 0,09
|
0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,20
|
0,24
|
0,25
|
|
| K | 1 | 80 | 120 | 170 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
| 2 | 80 | 110 | 120 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
|
| 3 | 50 | 80 | 100 | mm/r | 0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,21
|
0,28
|
0,32
|
0,33
|
|
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 95 | 125 | 175 | mm/r | 0,10
|
0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,24
|
0,28
|
0,29
|
| 1 | 90 | 130 | 170 | mm/r | 0,10
|
0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,24
|
0,28
|
0,29
|
|
| 2 | 100 | 140 | 180 | mm/r | 0,10
|
0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,24
|
0,28
|
0,29
|
|
| 3 | 60 | 100 | 130 | mm/r | 0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,18
|
0,23
|
0,30
|
0,31
|
|
| 4 | 60 | 100 | 130 | mm/r | 0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,18
|
0,23
|
0,25
|
0,26
|
|
| 5 | 60 | 80 | 100 | mm/r | 0,09
|
0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,20
|
0,24
|
0,25
|
|
| 6 | 60 | 70 | 80 | mm/r | 0,09
|
0,10
|
0,11
|
0,12
|
0,14
|
0,16
|
0,20
|
0,24
|
0,25
|
|
| K | 1 | 80 | 120 | 170 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
| 2 | 80 | 110 | 120 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
|
| 3 | 50 | 80 | 100 | mm/r | 0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,21
|
0,28
|
0,32
|
0,33
|
|
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| M | 1 | 50 | 60 | 90 | mm/r | 0,07
|
0,08
|
0,09
|
0,11
|
0,12
|
0,13
|
0,16
|
0,19
|
0,20
|
| 2 | 30 | 60 | 90 | mm/r | 0,07
|
0,08
|
0,09
|
0,11
|
0,12
|
0,13
|
0,16
|
0,19
|
0,20
|
|
| 3 | 20 | 50 | 60 | mm/r | 0,07
|
0,08
|
0,09
|
0,11
|
0,12
|
0,13
|
0,16
|
0,19
|
0,20
|
|
| Material
|
Cutting Speed
|
Inch | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| M | 1 | 160 | 200 | 300 | IPR | .003
|
.003
|
.004
|
.004
|
.005
|
.005
|
.006
|
.007
|
.008
|
| 2 | 100 | 200 | 300 | IPR | .003
|
.003
|
.004
|
.004
|
.005
|
.005
|
.006
|
.007
|
.008
|
|
| 3 | 70 | 160 | 200 | IPR | .003
|
.003
|
.004
|
.004
|
.005
|
.005
|
.006
|
.007
|
.008
|
|
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| M | 1 | 50 | 60 | 90 | mm/r | 0,07
|
0,08
|
0,09
|
0,11
|
0,12
|
0,13
|
0,16
|
0,19
|
0,20
|
| 2 | 30 | 60 | 90 | mm/r | 0,07
|
0,08
|
0,09
|
0,11
|
0,12
|
0,13
|
0,16
|
0,19
|
0,20
|
|
| 3 | 20 | 50 | 60 | mm/r | 0,07
|
0,08
|
0,09
|
0,11
|
0,12
|
0,13
|
0,16
|
0,19
|
0,20
|
|
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| K | 1 | 100 | 175 | 200 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
| 2 | 100 | 160 | 180 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
|
| 3 | 70 | 85 | 120 | mm/r | 0,11
|
0,13
|
0,15
|
0,17
|
0,19
|
0,21
|
0,28
|
0,32
|
0,33
|
|
| Material
|
Cutting Speed
|
Inch | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| K | 1 | 330 | 570 | 660 | IPR | .005
|
.005
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.015
|
| 2 | 330 | 520 | 590 | IPR | .005
|
.005
|
.006
|
.007
|
.009
|
.010
|
.012
|
.014
|
.015
|
|
| 3 | 230 | 280 | 390 | IPR | .004
|
.005
|
.005
|
.006
|
.007
|
.008
|
.011
|
.013
|
.013
|
|
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| K | 1 | 100 | 175 | 200 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
| 2 | 100 | 160 | 180 | mm/r | 0,12
|
0,14
|
0,16
|
0,19
|
0,23
|
0,26
|
0,30
|
0,36
|
0,37
|
|
| 3 | 70 | 85 | 120 | mm/r | 0,11
|
0,13
|
0,15
|
0,17
|
0,19 – 0,42 | 0,21
|
0,28
|
0,32
|
0,33
|
|
| Material
|
Cutting Speed
|
Metric | |||||||||
| Range
|
Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0,02–0,08 | 0,03–0,10 | 0,04–0,12 | 0,05–0,16 | 0,05–0,18 | 0,06–0,20 |
| N | 1 | 100 | 230 | 270 | mm/r | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
| 2 | 100 | 220 | 270 | mm/r | 0,14–0,23 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| 3 | 90 | 180 | 230 | mm/r | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
| 4 | 90 | 130 | 200 | mm/r | 0,10–0,18 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0,03-0,10 | 0,04-0,12 | 0,05-0,15 | 0,05-0,18 | 0,06-0,21 | 0,07-0,23 |
| 3 | 10 | 13 | 20 | mm/r | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| 4 | 10 | 20 | 40 | mm/r | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| Material
|
Cutting Speed
|
Inch | |||||||||
| Range
|
Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| S | 4 | 30 | 40 | 70 | IPR | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 |
| N | 1 | 330 | 750 | 890 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 330 | 720 | 890 | IPR | .006–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 750 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 | |
| 4 | 300 | 430 | 660 | IPR | .004–.007 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| C | 4 | 230 | 360 | 460 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 |
| 4 | 30 | 40 | 70 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| 4 | 30 | 70 | 130 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| Material
|
Cutting Speed
|
Metric | |||||||||
| Range
|
Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 |
| N | 1 | 100 | 230 | 270 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 |
| 2 | 100 | 220 | 270 | mm/r | 0.14～0.23 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| 3 | 90 | 180 | 230 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 | |
| 4 | 90 | 130 | 200 | mm/r | 0.10～0.18 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 |
| 3 | 10 | 13 | 20 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 | |
| 4 | 10 | 20 | 40 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 | |
| Material
|
Cutting Speed
|
Inch | |||||||||
| Range
|
Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 1 | 260 | 330 | 490 | IPR | .002
|
.002
|
.002
|
.002
|
.002
|
.002
|
| Material
|
Cutting Speed
|
Metric | |||||||||
| Range
|
Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 1 | 80 | 100 | 150 | mm/r | 0,05
|
0,05
|
0,05
|
0,05
|
0,05
|
0,05
|
| Material
|
Cutting Speed
|
Metric | |||||||||
| Range
|
Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | |||
| C | 1 | 80 | 100 | 150 | mm/r | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 |
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 110 | 140 | 170 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 |
| 1 | 110 | 140 | 170 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 2 | 100 | 120 | 140 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 3 | 80 | 100 | 120 | mm/r | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 4 | 70 | 90 | 110 | mm/r | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 5 | 60 | 80 | 100 | mm/r | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| 6 | 60 | 80 | 100 | mm/r | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| M | 1 | 40 | 60 | 80 | mm/r | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 |
| 2 | 35 | 55 | 70 | mm/r | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 | |
| K | 1 | 90 | 120 | 175 | mm/r | 0,12-0,21 | 0,14-0,24 | 0,16-0,28 | 0,18-0,32 | 0,20-0,36 | 0,22-0,40 | 0,25-0,44 | 0,28-0,48 | 0,29-0,50 |
| 2 | 80 | 110 | 140 | mm/r | 0,12–0,21 | 0,14–0,24 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,25–0,44 | 0,28–0,48 | 0,29–0,50 | |
| 3 | 70 | 80 | 100 | mm/r | 0,11-0,19 | 0,13-0,22 | 0,14-0,25 | 0,16-0,28 | 0,18-0,32 | 0,21-0,36 | 0,23-0,40 | 0,26-0,44 | 0,27-0,46 | |
| Material
|
Cutting Speed
|
Inch | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| P | 0 | 360 | 460 | 560 | IPR | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 |
| 1 | 360 | 460 | 560 | IPR | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 | |
| 2 | 330 | 400 | 460 | IPR | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 | |
| 3 | 260 | 330 | 400 | IPR | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.008–0.012 | 0.008–0.014 | 0.009–0.014 | |
| 4 | 230 | 330 | 360 | IPR | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.008–0.012 | 0.008–0.014 | 0.009–0.014 | |
| 5 | 200 | 260 | 330 | IPR | 0.004–0.006 | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.013 | 0.008–0.013 | |
| 6 | 200 | 260 | 330 | IPR | 0.004–0.006 | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.013 | 0.008–0.013 | |
| M | 1 | 130 | 200 | 260 | IPR | 0.003–0.005 | 0.003–0.006 | 0.004–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.006–0.011 |
| 2 | 120 | 180 | 230 | IPR | 0.003–0.005 | 0.003–0.006 | 0.004–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.006–0.011 | |
| K | 1 | 300 | 400 | 580 | IPR | 0.005-0.008 | 0.006-0.009 | 0.006-0.011 | 0.007-0.013 | 0.008-0.014 | 0.009-0.016 | 0.010-0.017 | 0.011-0.019 | 0.011-0.020 |
| 2 | 260 | 360 | 460 | IPR | 0.005–0.008 | 0.006–0.009 | 0.006–0.011 | 0.007–0.013 | 0.008–0.014 | 0.009–0.016 | 0.010–0.017 | 0.011–0.019 | 0.011–0.020 | |
| 3 | 230 | 260 | 330 | IPR | 0.004-0.007 | 0.005-0.009 | 0.006-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.014 | 0.009-0.016 | 0.010-0.017 | 0.011-0.018 | |
| Material
|
Cutting Speed
|
Metric | ||||||||||||
| Range
|
Recommended Feed Rate per Rev | |||||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 110 | 140 | 170 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 |
| 1 | 110 | 140 | 170 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 2 | 100 | 120 | 140 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 3 | 80 | 100 | 120 | mm/r | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 4 | 70 | 90 | 110 | mm/r | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 5 | 60 | 80 | 100 | mm/r | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| 6 | 60 | 80 | 100 | mm/r | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| M | 1 | 40 | 60 | 80 | mm/r | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 |
| 2 | 35 | 55 | 70 | mm/r | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 | |
| K | 1 | 90 | 120 | 175 | mm/r | 0,12-0,21 | 0,14-0,24 | 0,16-0,28 | 0,18-0,32 | 0,20-0,36 | 0,22-0,40 | 0,25-0,44 | 0,28-0,48 | 0,29-0,50 |
| 2 | 80 | 110 | 140 | mm/r | 0,12–0,21 | 0,14–0,24 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,25–0,44 | 0,28–0,48 | 0,29–0,50 | |
| 3 | 70 | 80 | 100 | mm/r | 0,11-0,19 | 0,13-0,22 | 0,14-0,25 | 0,16-0,28 | 0,18-0,32 | 0,21-0,36 | 0,23-0,40 | 0,26-0,44 | 0,27-0,46 | |