List price:

Discount: %

List price

$527.38 /each.

Your price::

Qty

7792VXD09 Shell Mill • Coarse, Medium and Fine Pitch • Inch

Name: 7792VXD09 Shell Mill • Coarse, Medium and Fine Pitch • Inch
SKU: 5658170

High-Feed Milling Cutters

Metric

Inch

SAP Material Number	5658170
ISO Catalog Number	C7792VXD09-A1.50Z5R
ANSI Catalog Number	C7792VXD09-A1.50Z5R
[D1MAX] Maximum Cutting Diameter	38.1000
[D1MAX] Maximum Cutting Diameter	1.500
[D] Adapter / Shank / Bore Diameter	12.7
[D] Adapter / Shank / Bore Diameter	.5
[D6] Hub Diameter	34.0000
[D6] Hub Diameter	1.339
[L] Overall Length	32.0000
[L] Overall Length	1.260
[AP1MAX] 1st Maximum Cutting Depth	1.5000
[AP1MAX] 1st Maximum Cutting Depth	.0590
[Z] Number of Flutes	5

See all Product Variants

Uses and application

Surfaçage
Ramping : Ébauche
Fraisage hélicoïdal
Usinage de poches
Fraisage en plongée : Bout hémisphérique
Lamage
Slotting: Shoulder
Spiral Circular
Inclined Square End Mill
Fraisage — Arrosage interne
Fraisage — 3 tailles

Workpiece Materials

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Features and benefits

Superior surface generation with integrated wiper facet.

Maximum material removal rates.

Suitable to machine HTA and titanium.

Ultra-fine pitch cutters available to increase material removal rates, especially on high-temp alloys.

Positive design to support lower cutting forces and long overhang usage.

Ramping and plunge milling capabilities.

Machine Side

Workpiece Side

Grades

Guide de sélection des plaquettes • IC 09

Material Group	LightMachining		GeneralPurpose		HeavyMachining
	(Light geometry)				(Strong geometry)
	wear resistance				toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	…GP	KC522M	…GP	KCPM40	…GP	KCPM40
P3–P4	…GP	KC522M	…D	KC522M	…D	KCPM40
P5–P6	...D411	SP6519	...D411	X500	...D41	X500
M1–M2	...D411	SP6519	...D41	KCSM40	...D41	KCSM40
M3	...D411	SP6519	...D41	KCSM40	...D41	KCSM40
K1–K2	…D	KCK15	…D	KCK15	…D	KCPK30
K3	…D	KCPK30	…D	KCPK30	…D	KCPK30
N1–N2	...D721	GH2	...D721	GH2	...D721	GH2
N3	...D721	GH2	...D721	GH2	...D721	GH2
S1–S2	...D411	SP6519	...D411	KCSM40	...D41	KCSM40
S3	...D411	SP6519	...D411	KCSM40	...D41	KCSM40
S4	...D411	SP6519	...D411	KCSM40	...D41	KCSM40
H1	…D	KC510M	…D	KC510M	…D	KCPM40

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..D721	0,30	0,96	1,69	0,22	0,68	1,18	0,16	0,51	0,87	0,14	0,44	0,75	0,13	0,40	0,69	.E..D721
.E..D41	0,38	1,10	1,69	0,27	0,78	1,18	0,20	0,58	0,87	0,18	0,50	0,75	0,16	0,46	0,69	.E..D41
.E..D411	0,64	1,42	2,37	0,45	1,00	1,63	0,34	0,74	1,19	0,30	0,64	1,03	0,27	0,59	0,94	.E..D411
.S..D	0,55	1,21	1,99	0,39	0,86	1,38	0,29	0,63	1,01	0,25	0,55	0,88	0,23	0,50	0,80	.S..D
.S..GP	0,55	1,22	2,01	0,39	0,86	1,39	0,29	0,64	1,02	0,25	0,55	0,89	0,23	0,51	0,81	.S..GP

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..D721	0,35	1,12	1,98	0,25	0,79	1,37	0,19	0,59	1,01	0,16	0,51	0,87	0,15	0,47	0,80	.E..D721
.E..D41	0,44	1,28	1,98	0,32	0,90	1,37	0,24	0,67	1,01	0,21	0,58	0,87	0,19	0,53	0,80	.E..D41
.E..D411	0,44	1,28	1,98	0,32	0,90	1,37	0,24	0,67	1,01	0,21	0,58	0,87	0,19	0,53	0,80	.E..D411
.S..D	0,64	1,42	2,35	0,45	1,00	1,61	0,34	0,74	1,18	0,30	0,64	1,02	0,27	0,59	0,93	.S..D
.S..GP	0,64	1,42	2,37	0,45	1,00	1,63	0,34	0,74	1,19	0,30	0,64	1,03	0,27	0,59	0,94	.S..GP

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..D721	0,39	1,24	2,20	0,28	0,88	1,52	0,21	0,65	1,11	0,18	0,56	0,96	0,17	0,52	0,88	.E..D721
.E..D41	0,48	1,42	2,20	0,35	1,00	1,52	0,26	0,74	1,11	0,23	0,64	0,96	0,21	0,59	0,88	.E..D41
.E..D411	0,48	1,42	2,20	0,35	1,00	1,52	0,26	0,74	1,11	0,23	0,64	0,96	0,21	0,59	0,88	.E..D411
.S..D	0,70	1,57	2,61	0,50	1,10	1,78	0,37	0,81	1,30	0,33	0,71	1,12	0,30	0,64	1,03	.S..D
.S..GP	0,70	1,58	2,65	0,50	1,11	1,80	0,37	0,82	1,31	0,33	0,71	1,14	0,30	0,65	1,04	.S..GP

LightMachining

GeneralPurpose

HeavyMachining

Insert Geometry	Programmed Feed per Tooth (fz)			Insert Geometry
	Max 6mm insert engagement (ae radial engagement)
.E..D721	0,06	0,18	0,30	.E..D721
.E..D41	0,07	0,20	0,30	.E..D41
.E..D411	0,07	0,20	0,30	.E..D411
.S..D	0,10	0,22	0,35	.S..D
.S..GP	0,10	0,22	0,35	.S..GP

LightMachining

GeneralPurpose

HeavyMachining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..D721	.012	.038	.067	.009	.027	.047	.006	.020	.034	.006	.018	.030	.005	.016	.027	.E..D721
.E..D41	.015	.044	.067	.011	.031	.047	.008	.023	.034	.007	.020	.030	.006	.018	.027	.E..D41
.E..D411	.015	.044	.067	.011	.031	.047	.008	.023	.034	.007	.020	.030	.006	.018	.027	.E..D411
.S..D	.021	.048	.079	.015	.034	.055	.011	.025	.040	.010	.022	.035	.009	.020	.032	.S..D
.S..GP	.021	.048	.079	.015	.034	.054	.011	.025	.040	.010	.022	.035	.009	.020	.032	.S..GP

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..D721	.015	.047	.083	.010	.033	.057	.008	.024	.042	.007	.021	.036	.006	.019	.033	.E..D721
.E..D41	.018	.053	.083	.013	.038	.057	.010	.028	.042	.009	.024	.036	.008	.022	.033	.E..D41
.E..D411	.018	.053	.083	.013	.038	.057	.010	.028	.042	.009	.024	.036	.008	.022	.033	.E..D411
.S..D	.026	.059	.098	.019	.041	.067	.014	.031	.049	.012	.027	.042	.011	.024	.039	.S..D
.S..GP	.026	.058	.097	.019	.041	.067	.014	.030	.049	.012	.026	.042	.011	.024	.038	.S..GP

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..D721	.017	.054	.097	.012	.038	.066	.009	.028	.048	.008	.024	.042	.007	.022	.038	.E..D721
.E..D41	.021	.062	.097	.015	.043	.066	.011	.032	.048	.010	.028	.042	.009	.025	.038	.E..D41
.E..D411	.021	.062	.097	.015	.043	.066	.011	.032	.048	.010	.028	.042	.009	.025	.038	.E..D411
.S..D	.030	.069	.115	.021	.048	.078	.016	.035	.056	.014	.031	.049	.013	.028	.044	.S..D
.S..GP	.030	.068	.114	.021	.047	.077	.016	.035	.056	.014	.030	.048	.013	.028	.044	.S..GP

LightMachining

GeneralPurpose

HeavyMachining

Insert Geometry	Programmed Feed per Tooth (fz)			Insert Geometry
	Max .236" insert engagement (ae radial engagement)
...D721	.002	.007	.012	.E..D721
...D41	.003	.008	.012	.E..D41
...D411	.003	.008	.012	.E..D411
...D	.004	.009	.014	.S..D
...D	.004	.009	.014	.S..GP

LightMachining

GeneralPurpose

HeavyMachining

Vitesses de départ recommandées [m/mn]

Material Group		GH2			KCSM40			SC3025			SC6525			SP6519			X400			X500
P	1	–	–	–	–	–	–	–	–	–	445	305	170	355	260	155	310	230	145	325	240	155
	2										390	270	145	310	230	140	275	205	125	290	215	140
	3	–	–	–	–	–	–	–	–	–	350	240	125	275	200	120	240	180	115	250	185	120
	4	–	–	–	–	–	–	–	–	–	250	175	95	210	150	90	180	130	85	190	145	90
	5	–	–	–	165	120	85	–	–	–	190	145	95	170	125	85	–	–	–	155	120	85
	6	–	–	–	140	100	60	–	–	–	170	120	70	145	100	60	–	–	–	130	95	60
M	1	–	–	–	315	225	140	–	–	–	230	185	145	325	235	140	–	–	–	300	220	140
	2	–	–	–	280	205	130	–	–	–	310	220	130	280	205	125	–	–	–	265	190	120
	3	–	–	–	230	165	105	–	–	–	250	180	110	235	170	100	–	–	–	215	155	95
K	1	300	220	145	–	–	–	475	330	180	470	325	175	355	265	170	–	–	–	335	240	145
	2	260	190	125	–	–	–	400	275	145	365	250	140	290	210	130	–	–	–	245	185	125
	3	220	175	120	–	–	–	330	230	125	–	–	–	265	190	120	–	–	–	205	160	115
N	1	3295	1890	480	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	3295	1890	480	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	2560	1460	355	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	75	55	35	–	–	–	–	–	–	65	50	30	–	–	–	60	40	30
	2	–	–	–	70	50	35	–	–	–	–	–	–	60	40	25	–	–	–	55	40	25
	3	–	–	–	80	55	35	–	–	–	–	–	–	65	50	30	–	–	–	60	50	30
	4	–	–	–	110	80	50	–	–	–	–	–	–	95	70	45	–	–	–	90	65	40
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	115	85	55	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	95	70	40	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		GH2			KCSM40			SC3025			SC6525			SP6519			X400			X500
P	1	–	–	–	–	–	–	–	–	–	1460	1000	550	1165	845	510	1025	750	475	1060	785	510
	2	–	–	–	–	–	–	–	–	–	1280	890	475	1025	750	450	905	670	415	940	710	450
	3	–	–	–	–	–	–	–	–	–	1140	785	415	905	650	395	785	590	370	830	610	395
	4	–	–	–	–	–	–	–	–	–	830	570	310	690	490	295	590	430	275	630	475	295
	5	–	–	–	530	390	280	–	–	–	630	475	310	550	415	275	–	–	–	510	395	275
	6	–	–	–	450	730	200	–	–	–	550	395	235	475	335	200	–	–	–	430	310	200
M	1	–	–	–	1020	730	450	–	–	–	750	610	475	1060	770	450	–	–	–	985	725	450
	2	–	–	–	910	675	415	–	–	–	1025	725	430	925	670	415	–	–	–	865	630	395
	3	–	–	–	750	530	340	–	–	–	830	590	355	770	550	335	–	–	–	710	510	310
K	1	985	725	475	–	–	–	1555	1080	590	1535	1060	570	1165	865	550	–	–	–	1105	785	475
	2	845	630	415	–	–	–	1320	905	475	1200	830	450	940	690	430	–	–	–	805	610	415
	3	725	570	395	–	–	–	1080	750	415	–	–	–	865	630	395	–	–	–	670	535	370
N	1	10805	6200	1570	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	10805	6200	1570	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	8405	4780	1165	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	240	175	110	–	–	–	–	–	–	215	155	90	–	–	–	185	140	90
	2	–	–	–	220	160	100	–	–	–	–	–	–	185	140	85	–	–	–	175	140	85
	3	–	–	–	255	180	115	–	–	–	–	–	–	215	155	95	–	–	–	200	155	95
	4	–	–	–	355	260	165	–	–	–	–	–	–	310	235	145	–	–	–	290	215	140
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	370	275	180	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	310	235	140	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Suggestions

Product Suggestions

Product Categories

Resources

Notifications