Country

Langue

Unité de mesure

Liste des prix:

Réduction: %

Liste des prix:

$833.37 /each

Your price::

Qty

KSSM8+ • Fraises à surfacer • CI 10mm • Métrique

Name: KSSM8+ • Fraises à surfacer • CI 10mm • Métrique
SKU: 5420167
Rating: 0 (0 reviews)

Fraises à surfacer indexables

Metric

Inch

Numéro de matériaux SAP	5420167
Réf. catalogue ISO	KSSM88D080Z07SN10
Réf. catalogue ANSI	KSSM88D080Z07SN10
[D1] Diamètre effectif de coupe	80 mm
[D1] Diamètre effectif de coupe	3.15 in
[D1MAX] Diamètre de coupe maximal	80.64 mm
[D1MAX] Diamètre de coupe maximal	3.175 in
[D] Adaptateur / Queue / Diamètre d’alésage	27 mm
[D] Adaptateur / Queue / Diamètre d’alésage	1.06 in
[D2] Diamètre maximal du corps	77.92 mm
[D2] Diamètre maximal du corps	3.068 in
[D6] Diamètre du moyeu	60 mm
[D6] Diamètre du moyeu	2.362 in
[L] Longueur totale	50 mm
[L] Longueur totale	1.968 in
[AP1MAX] 1re profondeur de coupe maximale	9.16 mm
[AP1MAX] 1re profondeur de coupe maximale	.361 in
Nombre de plaquettes	7
Poids en kilogrammes	1.02
T/Min max	24800

Voir toutes les variantes de produits

Uses and application

Surfaçage
Rainurage : Bout plat
Fraisage de côté/avec épaulement : Bout plat
Fraisage — Arrosage interne
Fraisage — 3 tailles

Matériaux de pièce à usiner

P Acier

M Acier inoxydable

K Fonte

S Alliages hautes températures

Features and benefits

Outil à angle d'attaque à 88°.

Plaquette réversible.

8 arêtes de coupe pour réduire le coût d'usinage par arête.

Coupe douce et faibles efforts de coupe.

Excellent choix pour les outils à porte-à-faux important et les montages à fixation peu rigide.

Côté de la machine

Côté pièce à usiner

Guide de sélection des plaquettes

KSSM8+™ • IC10 • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
	(Light geometry)				(Strong geometry)
	wear resistance		<="" td="">		toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LD	KC725M	.S..GD	KCPK30	.S..GD	KCPM40
P3–P4	.E..LD	KCPK30	.S..GD	KCPK30	.S..GD	KCPK30
P5–P6	.E..LD	KC725M	.S..GD	KCPM40	.S..GD	KCPM40
M1–M2	.E..LD	KC725M	.E..LD	KC725M	.S..GD	KCPM40
M3	.E..LD	KC725M	.S..GD	KCPM40	.S..GD	KCPM40
K1–K2	.E..LD	KCK20B	.S..GD	KCK15	.S..GD	KCK15
K3	.E..LD	KCK20B	.S..GD	KCK15	.S..GD	KCPK30
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..LD	KC725M	.E..LD	KC725M	.E..LD	KC725M
S3	.E..LD	KC725M	.E..LD	KC725M	.S..GD	KCPM40
S4	.E..LD	KC725M	.E..LD	KC725M	.E..LD	KC725M
H1	–	–	–	–	–	–

Avances de départ recommandées [mm]

Light Machining

General Purpose

Heavy Machining

KSSM8+™ • IC10 Metric • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	30%			40–100%
	L	M	H	L	M	H
.E..LD	0,08	0,19	0,33	0,08	0,18	0,30
.S..GD	0,11	0,24	0,38	0,10	0,22	0,35
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

KSSM8+™ • IC10 Inch • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	30%			40–100%
	L	M	H	L	M	H
.E..LD	0.003	0.008	0.013	0.003	0.007	0.012
.S..GD	0.004	0.009	0.015	0.004	0.009	0.014
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Light Machining

General Purpose

Heavy Machining

Vitesses de départ recommandées [m/mn]

KSSM8+™ • IC10 • Recommended Starting Speed [m/min]
Grade		KC725M			KCK15			KCPK30			KCK20B			KCPM40
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245
	2	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180
	3	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160
	4	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135
	5	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135
	6	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90
M	1	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155
	2	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125
	3	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90
K	1	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–
	2	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–
	3	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30
	2	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30
	3	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30
	4	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

KSSM8+™ • IC10 • Recommended Starting Speed [SFM]
Grade		KC725M			KCK15			KCPK30			KCK20B			KCPM40
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245
	2	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180
	3	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160
	4	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135
	5	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135
	6	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90
M	1	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155
	2	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125
	3	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90
K	1	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–
	2	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–
	3	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30
	2	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30
	3	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30
	4	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	catalogue ISO	Grade

Bienvenue

Veuillez confirmer vos préférences

Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

Contacter l'équipe commerciale

Contacter l'équipe commerciale

Édition de la Solution

Ajout de Solution