No
Sign In
Loading Profile
COVID-19 : La réponse de Kennametal
Personal protection equipment

1. Wear approved Personal Protection Equipment (PPE), including:

  • Eye and ear protection
  • Steel-toed shoes
  • Protective helmets
  • Gloves
  • Vest

2. Make sure tools are properly seated and securely retained. 

removing tools

3. Exercise care when removing tools.

machine operator

4. Operate all machines with safety in mind. Stand clear of machines in use and make sure protective guards are in place.

moving wheel

5. Do not change tools when the cutting chain, drum, or wheel is moving or still engaged.

cooling the machine

6. Allow machine to cool and always wear protective gloves to inspect or touch conicals.

tool inspection

7. Inspect tools daily. Do not use dull, cracked, burred, or bent tools.


Many injuries occur during tool change-out in construction and surface mining sites. Kennametal recommends the installer be equipped with the appropriate Personal Protective Equipment (PPE) for each task. Using Kennametal tools to install conicals is recommended. If proper tools are not used, the clip retaining strength could be weakened and could result in lost tool and machine productivity.