Suggestions

Product Suggestions

Product Categories

Resources

オンラインでご注文
successfully added to cart
View Cart
EXIT SEARCH
Back to Solution
Contact us
トップノッチ溝入れボーリングバー
トップノッチ溝入れボーリングバー
トップノッチ溝入れボーリングバー
トップノッチ溝入れボーリングバー
トップノッチ溝入れボーリングバー
トップノッチ溝入れボーリングバー

A-NS

トップノッチ溝入れボーリングバー

Uses and application

  • I.D. FacingI.D. Facing
  • I.D. Face GroovingI.D. Face Grooving

Workpiece Materials

P
M
K
N
S
H
トップノッチ溝入れボーリングバー
トップノッチ溝入れボーリングバー
Filters and Columns
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11)
  • M Stainless Steel (11)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (11)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (11)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (11)
  • K Cast Iron (11)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (11)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (11)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (11)
  • N Non-Ferrous Materials (11)
    • N1
      Wrought Aluminum
      (11)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (11)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (11)
    • N6
      Carbon, Graphite Composites, CFRP
      (11)
    • N7
      MMC's
      (11)
  • S High-Temp Alloys (11)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (11)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (11)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (11)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (11)
  • H Hardened Materials (11)
    • H1
      Hardened Materials 44-48 HRC
      (11)
    • H2
      Hardened Materials 48-55 HRC
      (11)
    • H3
      Hardened Materials 56-60 HRC
      (11)
    • H4
      Hardened Materials >60 HRC
      (11)
Applications
  • Cut-Off Cut-Off (10)
  • Deep Grooving Deep Grooving (10)
  • Face Grooving Face Grooving (10)
  • Grooving Grooving (10)
  • ID Facing ID Facing (10)
  • ID Grooving ID Grooving (10)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (10)
  • OD Thread Turning OD Thread Turning (10)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (10)
  • Threading Threading (10)
  • Turning Turning (10)
Type of Thread
  • 60 (11)
  • ACME (11)
  • API (11)
  • API RD (11)
  • BSW (11)
  • BUTTRESS (11)
  • M (11)
  • NPT (11)
  • STUB ACME (11)
  • UN (11)
  • UNJ (11)
Cutting Condition
  • Heavily Interrupted Cut (11)
  • Lightly Interrupted Cut (11)
  • Smooth Cut (11)
  • Varying Depth of Cut (11)
Tool Cutting Edge Angle
  • 90.0 (11)
to
Cutting Edges Per Insert
  • 1.0 (11)
  • 2.0 (11)
to
cornerConfiguration
Corner Radius
  • 0.026 (6)
  • 0.051 (6)
  • 0.057 (5)
  • 0.066 (11)
  • 0.076 (11)
  • 0.08 (11)
  • 0.089 (6)
  • 0.09 (6)
  • 0.094 (11)
  • 0.097 (5)
  • 0.1 (11)
  • 0.102 (11)
  • 0.116 (6)
  • 0.117 (5)
  • 0.127 (11)
  • 0.131 (11)
  • 0.132 (11)
  • 0.133 (11)
  • 0.15 (11)
  • 0.155 (7)
  • 0.157 (11)
  • 0.165 (11)
  • 0.173 (11)
  • 0.178 (11)
  • 0.19 (11)
  • 0.191 (11)
  • 0.198 (11)
  • 0.2 (11)
  • 0.202 (11)
  • 0.224 (11)
  • 0.235 (11)
  • 0.244 (6)
  • 0.25 (11)
  • 0.251 (11)
  • 0.254 (11)
  • 0.255 (6)
  • 0.269 (11)
  • 0.282 (11)
  • 0.284 (11)
  • 0.3 (11)
  • 0.315 (11)
  • 0.318 (11)
  • 0.33 (11)
  • 0.34 (11)
  • 0.343 (6)
  • 0.356 (11)
  • 0.404 (11)
  • 0.406 (11)
  • 0.43 (11)
  • 0.445 (11)
  • 0.472 (6)
  • 0.49 (11)
  • 0.508 (11)
  • 0.57 (5)
  • 0.572 (11)
  • 0.575 (6)
  • 0.787 (11)
  • 0.902 (11)
  • 1.0 (11)
  • 1.194 (11)
  • 1.195 (5)
  • 1.25 (11)
  • 1.5 (11)
  • 1.585 (11)
  • 1.588 (11)
  • 1.75 (11)
  • 1.98 (5)
  • 1.981 (11)
  • 2.0 (11)
  • 2.25 (11)
  • 2.388 (11)
to
Corner Radius
  • 0.002 (6)
  • 0.0023 (5)
  • 0.0026 (11)
  • 0.003 (11)
  • 0.0031 (11)
  • 0.0035 (6)
  • 0.0037 (11)
  • 0.0038 (5)
  • 0.004 (11)
  • 0.0046 (11)
  • 0.005 (11)
  • 0.0052 (11)
  • 0.0053 (11)
  • 0.0059 (11)
  • 0.006 (7)
  • 0.0062 (11)
  • 0.0065 (11)
  • 0.0068 (11)
  • 0.007 (11)
  • 0.0075 (11)
  • 0.0078 (11)
  • 0.0079 (4)
  • 0.008 (11)
  • 0.0088 (11)
  • 0.0093 (11)
  • 0.0096 (6)
  • 0.0099 (11)
  • 0.01 (11)
  • 0.0106 (11)
  • 0.0111 (11)
  • 0.0112 (11)
  • 0.0118 (11)
  • 0.0124 (11)
  • 0.0125 (11)
  • 0.013 (11)
  • 0.0135 (11)
  • 0.014 (11)
  • 0.0159 (11)
  • 0.016 (11)
  • 0.017 (11)
  • 0.0175 (11)
  • 0.0186 (6)
  • 0.0193 (11)
  • 0.02 (11)
  • 0.0225 (11)
  • 0.031 (11)
  • 0.0355 (11)
  • 0.0394 (11)
  • 0.047 (11)
  • 0.0492 (11)
  • 0.0591 (11)
  • 0.0625 (11)
  • 0.0689 (11)
  • 0.078 (11)
  • 0.0787 (11)
  • 0.0886 (11)
  • 0.094 (11)
  • 0.106 (5)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (11)
  • K313 (11)
  • K420 (11)
  • K4H (11)
  • K68 (11)
  • KB1345 (11)
  • KB1630 (11)
  • KB5625 (11)
  • KC250 (11)
  • KC5010 (11)
  • KC5025 (11)
  • KC5410 (11)
  • KC710 (11)
  • KC720 (11)
  • KC722 (11)
  • KC730 (11)
  • KC732 (11)
  • KC810 (11)
  • KC850 (11)
  • KC910 (11)
  • KC9110 (11)
  • KC9120 (11)
  • KC9320 (11)
  • KC935 (11)
  • KC950 (11)
  • KCK20 (11)
  • KCK20B (11)
  • KCP10B (11)
  • KCP25B (9)
  • KCU10 (11)
  • KCU25 (11)
  • KD050 (6)
  • KD081 (11)
  • KD100 (11)
  • KD120 (11)
  • KD1425 (9)
  • KT175 (11)
  • KT315 (11)
  • KU10T (11)
  • KU25T (11)
  • KU30T (11)
  • KY3000 (11)
Wiper Insert
  • N (11)
Minimum Axial Groove Diameter
  • 2.25 (7)
  • 2.375 (2)
  • 2.875 (2)
to
Minimum Axial Groove Diameter
  • 57.15 (7)
  • 60.325 (2)
  • 73.025 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (11)
to
Maximum Axial Groove Diameter
  • 393.661 (11)
to
Maximum Bore Depth
  • 101.6 (2)
  • 127.0 (2)
  • 152.4 (2)
  • 177.8 (1)
  • 203.2 (2)
  • 254.0 (2)
to
Maximum Bore Depth
  • 4.0 (2)
  • 5.0 (2)
  • 6.0 (2)
  • 7.0 (1)
  • 8.0 (2)
  • 10.0 (2)
to
frontEnd
Clamp Style
  • N (11)
Insert Shape
  • TN-TOP NOTCH (11)
Cutting Width
  • 1.0 (11)
  • 1.19 (5)
  • 1.194 (11)
  • 1.2 (11)
  • 1.5 (11)
  • 1.57 (11)
  • 1.575 (11)
  • 1.75 (11)
  • 1.829 (11)
  • 1.981 (11)
  • 2.0 (11)
  • 2.2 (11)
  • 2.235 (11)
  • 2.24 (6)
  • 2.25 (5)
  • 2.388 (11)
  • 2.39 (5)
  • 2.464 (11)
  • 2.5 (11)
  • 2.667 (11)
  • 2.743 (11)
  • 2.75 (11)
  • 2.794 (11)
  • 2.997 (11)
  • 3.0 (11)
  • 3.099 (11)
  • 3.17 (11)
  • 3.175 (11)
  • 3.2 (11)
  • 3.25 (11)
  • 3.251 (11)
  • 3.32 (6)
  • 3.329 (6)
  • 3.5 (11)
  • 3.607 (11)
  • 3.96 (11)
  • 3.962 (11)
  • 3.974 (6)
  • 3.988 (11)
  • 4.0 (11)
  • 4.24 (5)
  • 4.242 (11)
  • 4.25 (6)
  • 4.3 (11)
  • 4.5 (11)
  • 4.521 (11)
  • 4.699 (11)
  • 4.775 (11)
  • 4.8 (11)
  • 4.801 (11)
  • 4.81 (11)
  • 4.88 (6)
  • 4.95 (7)
to
Cutting Width
  • 0.0394 (11)
  • 0.047 (11)
  • 0.0472 (11)
  • 0.0591 (11)
  • 0.062 (11)
  • 0.0689 (11)
  • 0.072 (11)
  • 0.078 (11)
  • 0.0787 (11)
  • 0.079 (4)
  • 0.0866 (11)
  • 0.088 (11)
  • 0.0886 (5)
  • 0.094 (11)
  • 0.097 (11)
  • 0.0984 (11)
  • 0.105 (11)
  • 0.108 (11)
  • 0.1083 (11)
  • 0.11 (11)
  • 0.118 (11)
  • 0.1181 (11)
  • 0.122 (11)
  • 0.125 (11)
  • 0.126 (11)
  • 0.128 (11)
  • 0.131 (6)
  • 0.1378 (11)
  • 0.142 (11)
  • 0.156 (11)
  • 0.157 (11)
  • 0.1574 (11)
  • 0.1575 (11)
  • 0.167 (11)
  • 0.1673 (6)
  • 0.169 (11)
  • 0.1771 (11)
  • 0.1772 (11)
  • 0.178 (11)
  • 0.185 (11)
  • 0.188 (11)
  • 0.189 (11)
  • 0.192 (6)
  • 0.195 (7)
to
Insert Size
  • 3 (11)
insertGeometry
Cutting Tool Material
  • B H (11)
  • B L (11)
  • C N (11)
  • D P (11)
  • H T (11)
  • H W (11)
backEnd
Back-End Diameter
  • 1.0 (2)
  • 1.25 (2)
  • 1.5 (2)
  • 1.75 (1)
  • 2.0 (2)
  • 2.5 (2)
to
Back-End Diameter
  • 25.4 (2)
  • 31.75 (2)
  • 38.1 (2)
  • 44.45 (1)
  • 50.8 (2)
  • 63.5 (2)
to
other
Platform
  • Top Notch (8)
Tool Unit
  • I (11)
Over All Length [L]
  • 304.8 (2)
  • 355.6 (5)
  • 406.4 (4)
to
Over All Length [L]
  • 12.0 (2)
  • 14.0 (5)
  • 16.0 (4)
to
Insert Hand
  • L (5)
  • R (6)
Cutting Condition Material
  • H-All (11)
  • K-All (11)
  • M-All (11)
  • N-All (11)
  • P-All (11)
  • S-All (11)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 11 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
1094912 A16TNSL3 A16TNSL3 57.1500 2.250 25.4 1.0 304.8000 12.000 16.2560 .6400 1/4-18 NPT N.3L 25 IP
    1094911 A16TNSR3 A16TNSR3 57.1500 2.250 25.4 1.0 304.8000 12.000 16.2560 .6400 1/4-18 NPT N.3R 25 IP
      1094914 A20UNSL3 A20UNSL3 57.1500 2.250 31.75 1.25 355.6000 14.000 19.4310 .7650 1/4-18 NPT N.3L 25 IP
        1094913 A20UNSR3 A20UNSR3 57.1500 2.250 31.75 1.25 355.6000 14.000 19.4310 .7650 1/4-18 NPT N.3R 25 IP
          1094916 A24UNSL3 A24UNSL3 57.1500 2.250 38.1 1.5 355.6000 14.000 22.6100 .8900 1/4-18 NPT N.3L 25 IP
            1094915 A24UNSR3 A24UNSR3 57.1500 2.250 38.1 1.5 355.6000 14.000 22.6100 .8900 1/4-18 NPT N.3R 25 IP
              1094917 A28UNSR3 A28UNSR3 57.1500 2.250 44.45 1.75 355.6000 14.000 25.7810 1.015 1/4-18 NPT N.3R 25 IP
                1094920 A32VNSL3 A32VNSL3 60.3250 2.375 50.8 2.0 406.4000 16.000 32.5370 1.281 1/4-18 NPT N.3L 25 IP
                  1094919 A32VNSR3 A32VNSR3 60.3250 2.375 50.8 2.0 406.4000 16.000 32.5370 1.281 1/4-18 NPT N.3R 25 IP
                    1094922 A40VNSL3 A40VNSL3 73.0250 2.875 63.5 2.5 406.4000 16.000 38.8870 1.531 1/4-18 NPT N.3L 25 IP
                      1094921 A40VNSR3 A40VNSR3 73.0250 2.875 63.5 2.5 406.4000 16.000 38.8870 1.531 1/4-18 NPT N.3R 25 IP
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor

                        サポート

                        製品サポート

                        Eメール  | 800.835.3668

                        注文サポート

                        Eメール | 800.446.7738

                        Global Support

                        サポート

                        専門家とチャットする。
                        現在販売中
                        Mon-Fri 8am - 6pm ET

                        Global Support

                        購入

                        Shop Kennametal Merchandise

                        Find Us on Ariba

                        Careers

                        Work for Kennametal

                        連絡を保つ

                        Join our Mailing List

                        ⤓ NOVO App

                        Find Replacements for Obsolete Tools

                        今すぐダウンロード

                        Search our Drawing Database


                        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        We have found the following CAD Drawings

                        Select the files you are looking for and download them all at once

                        Can’t find the file type you’re looking for?
                        Request Drawings »

                        You should be logged to see your dashboard information
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart