Suggestions

Product Suggestions

Product Categories

Resources

オンラインでご注文
successfully added to cart
View Cart
EXIT SEARCH
Back to Solution
Contact us
Top Notch™ねじ切りボーリングバー
Top Notch™ねじ切りボーリングバー
Top Notch™ねじ切りボーリングバー
Top Notch™ねじ切りボーリングバー

E-NE

Top Notch™ねじ切りボーリングバー

Uses and application

  • I.D. Internal ThreadingI.D. Internal Threading
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • I.D. GroovingI.D. Grooving

Workpiece Materials

P
M
K
N
S
H
Top Notch™ねじ切りボーリングバー
Filters and Columns
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Grooving Grooving (8)
  • ID Facing ID Facing (8)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • OD Thread Turning OD Thread Turning (8)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (8)
  • Threading Threading (8)
  • Turning Turning (8)
Type of Thread
  • 60 (8)
  • ACME (2)
  • API (2)
  • API RD (2)
  • BSW (2)
  • BUTTRESS (8)
  • M (5)
  • NPT (2)
  • STUB ACME (2)
  • UN (8)
  • UNJ (2)
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Tool Cutting Edge Angle
  • 90.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.026 (1)
  • 0.051 (1)
  • 0.057 (1)
  • 0.066 (2)
  • 0.076 (8)
  • 0.08 (8)
  • 0.089 (7)
  • 0.09 (7)
  • 0.094 (2)
  • 0.097 (1)
  • 0.1 (8)
  • 0.102 (8)
  • 0.116 (1)
  • 0.117 (1)
  • 0.127 (2)
  • 0.131 (2)
  • 0.132 (2)
  • 0.133 (2)
  • 0.15 (2)
  • 0.155 (2)
  • 0.157 (2)
  • 0.165 (2)
  • 0.173 (2)
  • 0.178 (2)
  • 0.18 (3)
  • 0.185 (3)
  • 0.19 (8)
  • 0.191 (8)
  • 0.198 (2)
  • 0.2 (2)
  • 0.202 (5)
  • 0.224 (2)
  • 0.235 (2)
  • 0.244 (1)
  • 0.25 (2)
  • 0.251 (2)
  • 0.254 (2)
  • 0.255 (1)
  • 0.269 (2)
  • 0.282 (2)
  • 0.284 (2)
  • 0.3 (2)
  • 0.315 (2)
  • 0.318 (2)
  • 0.33 (2)
  • 0.34 (2)
  • 0.343 (4)
  • 0.356 (2)
  • 0.404 (2)
  • 0.406 (2)
  • 0.43 (2)
  • 0.445 (2)
  • 0.472 (1)
  • 0.49 (2)
  • 0.5 (6)
  • 0.508 (2)
  • 0.57 (1)
  • 0.572 (2)
  • 0.575 (1)
  • 0.75 (6)
  • 0.787 (8)
  • 0.902 (2)
  • 1.0 (8)
  • 1.194 (8)
  • 1.195 (1)
  • 1.25 (8)
  • 1.5 (8)
  • 1.585 (2)
  • 1.588 (8)
  • 1.75 (8)
  • 1.98 (1)
  • 1.981 (2)
  • 2.0 (2)
  • 2.25 (2)
  • 2.388 (2)
to
Corner Radius
  • 0.002 (1)
  • 0.0023 (1)
  • 0.0026 (2)
  • 0.003 (8)
  • 0.0031 (8)
  • 0.0035 (7)
  • 0.0037 (2)
  • 0.0038 (1)
  • 0.004 (8)
  • 0.0046 (2)
  • 0.005 (2)
  • 0.0052 (2)
  • 0.0053 (2)
  • 0.0059 (2)
  • 0.006 (2)
  • 0.0062 (2)
  • 0.0065 (2)
  • 0.0068 (2)
  • 0.007 (2)
  • 0.0075 (8)
  • 0.0078 (2)
  • 0.0079 (1)
  • 0.008 (5)
  • 0.0088 (2)
  • 0.0093 (2)
  • 0.0096 (1)
  • 0.0099 (2)
  • 0.01 (2)
  • 0.0106 (2)
  • 0.0111 (2)
  • 0.0112 (2)
  • 0.0118 (2)
  • 0.0124 (2)
  • 0.0125 (2)
  • 0.013 (2)
  • 0.0135 (5)
  • 0.014 (2)
  • 0.0159 (2)
  • 0.016 (2)
  • 0.017 (2)
  • 0.0175 (2)
  • 0.0186 (1)
  • 0.0193 (2)
  • 0.0197 (6)
  • 0.02 (2)
  • 0.0225 (2)
  • 0.0295 (6)
  • 0.031 (8)
  • 0.0355 (2)
  • 0.0394 (8)
  • 0.047 (8)
  • 0.0492 (8)
  • 0.0591 (8)
  • 0.0625 (8)
  • 0.0689 (8)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.0886 (2)
  • 0.094 (2)
  • 0.106 (1)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (8)
  • K313 (8)
  • K420 (8)
  • K4H (5)
  • K68 (8)
  • KB1345 (2)
  • KB1630 (2)
  • KB5625 (2)
  • KC250 (8)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (8)
  • KC710 (8)
  • KC720 (8)
  • KC722 (8)
  • KC730 (8)
  • KC732 (2)
  • KC810 (8)
  • KC850 (8)
  • KC910 (5)
  • KC9110 (8)
  • KC9120 (2)
  • KC9320 (8)
  • KC935 (8)
  • KC950 (8)
  • KCK20 (5)
  • KCK20B (8)
  • KCP10B (8)
  • KCP25B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (1)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1425 (2)
  • KT175 (8)
  • KT315 (8)
  • KU10T (8)
  • KU25T (8)
  • KU30T (8)
  • KY3000 (2)
Wiper Insert
  • N (8)
Minimum Axial Groove Diameter
  • 0.73 (2)
  • 1.0 (2)
  • 1.125 (2)
  • 1.375 (2)
to
Minimum Axial Groove Diameter
  • 18.542 (2)
  • 25.4 (2)
  • 28.575 (2)
  • 34.925 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (8)
to
Maximum Axial Groove Diameter
  • 393.661 (8)
to
Maximum Bore Depth
  • 76.2 (2)
  • 95.25 (2)
  • 114.3 (2)
  • 152.4 (2)
to
Maximum Bore Depth
  • 3.0 (2)
  • 3.75 (2)
  • 4.5 (2)
  • 6.0 (2)
to
frontEnd
Clamp Style
  • N (8)
Insert Shape
  • TN-TOP NOTCH (8)
Cutting Width
  • 0.5 (6)
  • 0.787 (6)
  • 0.8 (6)
  • 0.889 (6)
  • 0.991 (6)
  • 1.0 (8)
  • 1.041 (6)
  • 1.19 (7)
  • 1.194 (8)
  • 1.199 (3)
  • 1.2 (8)
  • 1.39 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.473 (6)
  • 1.5 (8)
  • 1.56 (3)
  • 1.57 (5)
  • 1.575 (8)
  • 1.69 (6)
  • 1.7 (6)
  • 1.702 (6)
  • 1.75 (8)
  • 1.829 (2)
  • 1.94 (6)
  • 1.95 (6)
  • 1.956 (6)
  • 1.981 (2)
  • 2.0 (8)
  • 2.007 (6)
  • 2.2 (8)
  • 2.235 (8)
  • 2.24 (7)
  • 2.25 (7)
  • 2.388 (8)
  • 2.39 (1)
  • 2.464 (2)
  • 2.5 (8)
  • 2.667 (2)
  • 2.74 (6)
  • 2.743 (8)
  • 2.75 (8)
  • 2.794 (2)
  • 2.997 (8)
  • 3.0 (8)
  • 3.099 (2)
  • 3.17 (2)
  • 3.175 (8)
  • 3.18 (3)
  • 3.2 (8)
  • 3.245 (6)
  • 3.25 (2)
  • 3.251 (8)
  • 3.27 (6)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (8)
  • 3.607 (2)
  • 3.73 (3)
  • 3.81 (6)
  • 3.84 (6)
  • 3.96 (2)
  • 3.962 (2)
  • 3.974 (1)
  • 3.988 (2)
  • 4.0 (2)
  • 4.24 (1)
  • 4.242 (2)
  • 4.25 (1)
  • 4.3 (2)
  • 4.5 (2)
  • 4.521 (2)
  • 4.699 (2)
  • 4.775 (2)
  • 4.8 (2)
  • 4.801 (2)
  • 4.81 (2)
  • 4.88 (1)
  • 4.95 (2)
to
Cutting Width
  • 0.0197 (6)
  • 0.031 (6)
  • 0.0315 (6)
  • 0.035 (6)
  • 0.039 (6)
  • 0.0394 (8)
  • 0.041 (6)
  • 0.047 (8)
  • 0.0472 (8)
  • 0.055 (6)
  • 0.0551 (6)
  • 0.058 (6)
  • 0.0591 (8)
  • 0.062 (8)
  • 0.0669 (6)
  • 0.067 (6)
  • 0.0689 (8)
  • 0.072 (2)
  • 0.076 (6)
  • 0.0768 (6)
  • 0.077 (6)
  • 0.078 (2)
  • 0.0787 (8)
  • 0.079 (7)
  • 0.0866 (8)
  • 0.088 (8)
  • 0.0886 (7)
  • 0.094 (8)
  • 0.097 (2)
  • 0.0984 (8)
  • 0.105 (2)
  • 0.108 (8)
  • 0.1083 (8)
  • 0.11 (2)
  • 0.118 (8)
  • 0.1181 (8)
  • 0.122 (2)
  • 0.125 (8)
  • 0.126 (8)
  • 0.1278 (6)
  • 0.128 (8)
  • 0.129 (6)
  • 0.131 (1)
  • 0.1378 (8)
  • 0.142 (2)
  • 0.147 (3)
  • 0.15 (6)
  • 0.151 (6)
  • 0.156 (2)
  • 0.157 (2)
  • 0.1574 (2)
  • 0.1575 (2)
  • 0.167 (2)
  • 0.1673 (1)
  • 0.169 (2)
  • 0.1771 (2)
  • 0.1772 (2)
  • 0.178 (2)
  • 0.185 (2)
  • 0.188 (2)
  • 0.189 (2)
  • 0.192 (1)
  • 0.195 (2)
to
Insert Size
  • 2 (6)
  • 3 (2)
insertGeometry
Cutting Tool Material
  • B H (2)
  • B L (2)
  • C N (2)
  • D P (2)
  • H T (8)
  • H W (8)
backEnd
Back-End Diameter
  • 0.5 (2)
  • 0.625 (2)
  • 0.75 (2)
  • 1.0 (2)
to
Back-End Diameter
  • 12.7 (2)
  • 15.875 (2)
  • 19.05 (2)
  • 25.4 (2)
to
other
Grade
  • KWH (8)
Platform
  • Top Notch (8)
Tool Unit
  • I (8)
Over All Length [L]
  • 203.2 (2)
  • 254.0 (4)
  • 304.8 (2)
to
Over All Length [L]
  • 8.0 (2)
  • 10.0 (4)
  • 12.0 (2)
to
Insert Hand
  • L (4)
  • R (4)
Cutting Condition Material
  • H-All (8)
  • K-All (8)
  • M-All (8)
  • N-All (8)
  • P-All (8)
  • S-All (8)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 8 of 8 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia Gage Insert Clamp Screw ID Drive Size
1152689 E08NEL2 E08NEL2 KWH 18.5420 .7300 12.7 .5 203.2000 8.000 10.9730 .4320 4.7500 .1870 N.2R 7/64
    1152688 E08NER2 E08NER2 KWH 18.5420 .7300 12.7 .5 203.2000 8.000 10.9730 .4320 4.7500 .1870 N.2L 7/64
      1152607 E10NEL2 E10NEL2 KWH 25.4000 1.000 15.875 .625 254.0000 10.000 12.5730 .4950 5.5370 .2180 N.2R 7/64
        1152606 E10NER2 E10NER2 KWH 25.4000 1.000 15.875 .625 254.0000 10.000 12.5730 .4950 5.5370 .2180 N.2L 7/64
          1152609 E12NEL2 E12NEL2 KWH 28.5750 1.125 19.05 .75 254.0000 10.000 14.1480 .5570 7.1370 .2810 N.2R 7/64
            1152608 E12NER2 E12NER2 KWH 28.5750 1.125 19.05 .75 254.0000 10.000 14.1480 .5570 7.1370 .2810 N.2L 7/64
              1152611 E16NEL3 E16NEL3 KWH 34.9250 1.375 25.4 1.0 304.8000 12.000 17.3480 .6830 7.9250 .3120 N.3R 25 IP
                1152610 E16NER3 E16NER3 KWH 34.9250 1.375 25.4 1.0 304.8000 12.000 17.3480 .6830 7.9250 .3120 N.3L 25 IP
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor

                  Grades

                  • KWH

                    KWH

                    P
                    M
                    K
                    N
                    S
                    H

                  サポート

                  製品サポート

                  Eメール  | 800.835.3668

                  注文サポート

                  Eメール | 800.446.7738

                  Global Support

                  サポート

                  専門家とチャットする。
                  現在販売中
                  Mon-Fri 8am - 6pm ET

                  Global Support

                  購入

                  Shop Kennametal Merchandise

                  Find Us on Ariba

                  Careers

                  Work for Kennametal

                  連絡を保つ

                  Join our Mailing List

                  ⤓ NOVO App

                  Find Replacements for Obsolete Tools

                  今すぐダウンロード

                  Search our Drawing Database


                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  Can’t find the file type you’re looking for?
                  Request Drawings »

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart