successfully added to cart
View Cart

Notifications

Mark all as read
Read More

溝入れと突っ切り

Beyond™ Evolution™

多方向旋削加工も行える溝入れと突っ切りの新しい片面工具です。Beyond™ Evolution™独自の新しい特長であるトリプルVシートにより、機能の安定性が生まれ、振動を最小限に抑えます。

V字型バックデザイン
溝入れ加工、突っ切り加工、および多方向旋削加工時の負荷での卓越した安定性を誇ります。

上部と下部のV
正確で確実なインサート位置合わせにより、高い剛性と寸法精度が得られます。

Part of FirstChoice Products

第1選択プログラムの全製品。

選択や注文、使用が容易で、並外れた性能。 第1選択の詳細をご覧ください。

切り屑分断効果

切り屑分断効果

溝入れ加工、突っ切り加工、および多方向旋削加工のあらゆるアプリケーションにおいて、切り屑排出を向上させます。

拡散効果

トリプルV字デザイン

1. V字型バックデザイン - 溝入れ加工、突っ切り、多方向旋削加工時の負荷での安定性を誇ります。

2. 上部と下部のV字型 - 正確で確実なインサート位置合わせにより、高い剛性と寸法精度が得られます。

拡散効果

拡散効果

クーラントはインサートの上部を介して切り屑の下にある切削域に正確に供給され、温度のコントロールが可能です。

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (353)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (353)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (353)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (353)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (353)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (353)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (353)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (353)
  • M Stainless Steel (305)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (305)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (305)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (305)
  • K Cast Iron (353)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (353)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (353)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (353)
  • N Non-Ferrous Materials (314)
    • N1
      Wrought Aluminum
      (314)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (305)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (314)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (305)
    • N6
      Carbon, Graphite Composites, CFRP
      (305)
  • S High-Temp Alloys (314)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (314)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (314)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (314)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (314)
  • H Hardened Materials (269)
    • H1
      Hardened Materials 44-48 HRC
      (269)
    • H2
      Hardened Materials 48-55 HRC
      (269)
Select First Choice
  • BR (8)
  • CN (69)
  • DE (69)
  • GB (39)
  • IN (3)
  • SG (26)
  • US (102)
Applications
Applications
  • Back Boring Back Boring (44)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (183)
  • Deep Grooving Deep Grooving (2)
  • Face Grooving Face Grooving (79)
  • Facing Facing (59)
  • Grooving Grooving (352)
  • ID Facing ID Facing (56)
  • ID Grooving ID Grooving (144)
  • Multiple Direction Cutting Multiple Direction Cutting (53)
  • Plunge Turning Plunge Turning (136)
  • Profiling Profiling (51)
  • Turning Turning (99)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (282)
  • Lightly Interrupted Cut (328)
  • Smooth Cut (362)
  • Varying Depth of Cut (329)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (235)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (52)
  • Toolholder (148)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (127)
  • 1.0 (200)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (1)
  • 0.039 in (2)
  • 0.041 in (7)
  • 0.047 in (5)
  • 0.06 in (3)
  • 0.061 in (9)
  • 0.063 in (6)
  • 0.065 in (7)
  • 0.079 in (3)
  • 0.081 in (9)
  • 0.094 in (6)
  • 0.096 in (8)
  • 0.098 in (3)
  • 0.1 in (9)
  • 0.119 in (3)
  • 0.12 in (9)
  • 0.125 in (8)
  • 0.128 in (5)
  • 0.156 in (7)
  • 0.157 in (3)
  • 0.158 in (5)
  • 0.159 in (9)
  • 0.2 in (145)
  • 0.203 in (39)
  • 0.3 in (64)
  • 0.4 in (161)
  • 0.79 in (40)
  • 0.794 in (40)
  • 0.8 in (122)
  • 1.0 in (52)
  • 1.06 in (52)
  • 1.18 in (18)
  • 1.19 in (78)
  • 1.2 in (26)
  • 1.5 in (39)
  • 1.56 in (39)
  • 1.59 in (39)
  • 1.65 in (39)
  • 2.0 in (40)
  • 2.06 in (40)
  • 2.37 in (40)
  • 2.38 in (40)
  • 2.44 in (40)
  • 2.5 in (32)
  • 2.56 in (32)
  • 3.0 in (32)
  • 3.06 in (32)
  • 3.17 in (32)
  • 3.24 in (32)
  • 3.96 in (18)
  • 4.0 in (18)
  • 4.03 in (18)
  • 4.06 in (18)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (145)
  • 0.203 mm (39)
  • 0.3 mm (64)
  • 0.4 mm (161)
  • 0.79 mm (40)
  • 0.794 mm (40)
  • 0.8 mm (123)
  • 1.0 mm (54)
  • 1.05 mm (7)
  • 1.06 mm (52)
  • 1.18 mm (18)
  • 1.19 mm (78)
  • 1.2 mm (26)
  • 1.201 mm (5)
  • 1.5 mm (42)
  • 1.55 mm (9)
  • 1.56 mm (39)
  • 1.59 mm (39)
  • 1.6 mm (6)
  • 1.65 mm (39)
  • 1.651 mm (7)
  • 2.0 mm (43)
  • 2.051 mm (9)
  • 2.06 mm (40)
  • 2.37 mm (40)
  • 2.375 mm (6)
  • 2.38 mm (40)
  • 2.44 mm (40)
  • 2.45 mm (8)
  • 2.5 mm (35)
  • 2.551 mm (9)
  • 2.56 mm (32)
  • 3.0 mm (35)
  • 3.051 mm (9)
  • 3.06 mm (32)
  • 3.17 mm (32)
  • 3.176 mm (8)
  • 3.24 mm (32)
  • 3.25 mm (5)
  • 3.95 mm (7)
  • 3.96 mm (18)
  • 4.0 mm (21)
  • 4.025 mm (5)
  • 4.03 mm (18)
  • 4.05 mm (9)
  • 4.06 mm (18)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (162)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (162)
Corner Chamfer Min to Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (47)
  • Lightly Interrupted Cut (93)
  • Smooth Cut (127)
  • Varying Depth of Cut (94)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (244)
  • KCK20B (244)
  • KCM35B (163)
  • KCP10B (252)
  • KCP25B (257)
  • KCU10 (269)
  • KCU25 (271)
Hand Of Tool
Hand Of Tool
  • L (100)
  • R (100)
Wiper Insert
Wiper Insert
  • N (327)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 20.0 mm (12)
  • 25.0 mm (10)
  • 25.401 mm (2)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (4)
  • 40.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.787 in (12)
  • 0.984 in (10)
  • 1.0 in (2)
  • 1.25 in (6)
  • 1.26 in (6)
  • 1.5 in (4)
  • 1.575 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 0.0 (1)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (169)
  • S (31)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (34)
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (4)
  • 1.0 in (4)
  • 1.25 in (6)
  • 1.26 in (4)
  • 1.5 in (6)
  • 1.575 in (4)
  • 1.586 in (2)
  • 1.587 in (2)
  • 1.969 in (2)
  • 1.98 in (4)
  • 2.0 in (7)
  • 2.496 in (2)
  • 2.5 in (1)
  • 2.52 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (4)
  • 25.401 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (4)
  • 38.1 mm (6)
  • 40.0 mm (4)
  • 40.276 mm (2)
  • 40.301 mm (2)
  • 50.0 mm (2)
  • 50.301 mm (4)
  • 50.801 mm (7)
  • 63.401 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (28)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (76)
Clamp Style
Clamp Style
  • Y (215)
Cutting Width
Cutting Width
  • 0.079 in (2)
  • 0.084 in (7)
  • 0.094 in (5)
  • 0.119 in (3)
  • 0.123 in (9)
  • 0.125 in (6)
  • 0.13 in (7)
  • 0.157 in (3)
  • 0.162 in (9)
  • 0.187 in (6)
  • 0.192 in (8)
  • 0.197 in (3)
  • 0.202 in (9)
  • 0.237 in (3)
  • 0.241 in (9)
  • 0.25 in (8)
  • 0.255 in (5)
  • 0.289 in (1)
  • 0.312 in (7)
  • 0.315 in (3)
  • 0.317 in (5)
  • 0.32 in (9)
  • 1.6 in (14)
  • 2.0 in (52)
  • 2.12 in (52)
  • 2.125 in (52)
  • 2.387 in (52)
  • 2.388 in (52)
  • 2.51 in (52)
  • 2.511 in (52)
  • 3.0 in (39)
  • 3.125 in (39)
  • 3.175 in (39)
  • 3.177 in (39)
  • 3.3 in (39)
  • 3.301 in (39)
  • 3.302 in (39)
  • 4.0 in (40)
  • 4.094 in (39)
  • 4.125 in (40)
  • 4.75 in (40)
  • 4.76 in (40)
  • 4.762 in (40)
  • 4.763 in (40)
  • 4.873 in (40)
  • 4.877 in (40)
  • 4.878 in (40)
  • 5.0 in (32)
  • 5.125 in (32)
  • 6.0 in (32)
  • 6.125 in (32)
  • 6.346 in (32)
  • 6.35 in (32)
  • 6.473 in (32)
  • 6.477 in (32)
  • 6.478 in (32)
  • 7.0 in (32)
  • 7.125 in (32)
  • 7.317 in (32)
  • 7.92 in (18)
  • 7.925 in (18)
  • 8.0 in (18)
  • 8.051 in (18)
  • 8.052 in (18)
  • 8.125 in (18)
  • 9.525 in (8)
  • 9.651 in (8)
  • 10.0 in (8)
  • 10.125 in (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.6 mm (14)
  • 2.0 mm (54)
  • 2.12 mm (52)
  • 2.125 mm (59)
  • 2.375 mm (5)
  • 2.387 mm (52)
  • 2.388 mm (52)
  • 2.51 mm (52)
  • 2.511 mm (52)
  • 3.0 mm (42)
  • 3.125 mm (48)
  • 3.175 mm (39)
  • 3.176 mm (6)
  • 3.177 mm (39)
  • 3.3 mm (39)
  • 3.301 mm (46)
  • 3.302 mm (39)
  • 4.0 mm (43)
  • 4.094 mm (39)
  • 4.125 mm (49)
  • 4.75 mm (46)
  • 4.76 mm (40)
  • 4.762 mm (40)
  • 4.763 mm (40)
  • 4.873 mm (40)
  • 4.875 mm (8)
  • 4.877 mm (40)
  • 4.878 mm (40)
  • 5.0 mm (35)
  • 5.125 mm (41)
  • 6.0 mm (35)
  • 6.125 mm (41)
  • 6.346 mm (32)
  • 6.35 mm (32)
  • 6.351 mm (8)
  • 6.473 mm (32)
  • 6.476 mm (5)
  • 6.477 mm (32)
  • 6.478 mm (32)
  • 7.0 mm (32)
  • 7.125 mm (32)
  • 7.317 mm (32)
  • 7.325 mm (1)
  • 7.92 mm (18)
  • 7.925 mm (18)
  • 7.926 mm (7)
  • 8.0 mm (21)
  • 8.05 mm (5)
  • 8.051 mm (18)
  • 8.052 mm (18)
  • 8.125 mm (27)
  • 9.525 mm (8)
  • 9.651 mm (8)
  • 10.0 mm (8)
  • 10.125 mm (8)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (76)
Insert Shape
Insert Shape
  • PRISMATIC (362)
Cartridge Size
Cartridge Size
  • 0 (35)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (76)
Insert Size
Insert Size
  • 0 (188)
  • 1F (12)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (8)
  • 0.276 in (24)
  • 0.394 in (12)
  • 0.473 in (18)
  • 0.63 in (60)
  • 0.866 in (27)
  • 1.024 in (50)
  • 1.26 in (24)
  • 1.575 in (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (8)
  • 7.0 mm (24)
  • 10.0 mm (12)
  • 12.0 mm (18)
  • 16.0 mm (60)
  • 22.0 mm (27)
  • 26.0 mm (50)
  • 32.0 mm (24)
  • 40.0 mm (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 1.102 in (2)
  • 1.299 in (2)
  • 1.496 in (2)
  • 1.693 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.929 in (4)
  • 2.106 in (4)
  • 2.185 in (2)
  • 2.244 in (6)
  • 2.283 in (6)
  • 2.303 in (6)
  • 2.382 in (2)
  • 2.5 in (12)
  • 2.579 in (2)
  • 2.618 in (4)
  • 2.697 in (4)
  • 2.894 in (4)
  • 5.439 in (2)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (6)
  • 5.533 in (4)
  • 5.906 in (2)
  • 6.226 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.533 in (2)
  • 6.694 in (2)
Gage Length
Gage Length
  • 47 mm (6)
  • 48 mm (6)
  • 57 mm (6)
  • 58 mm (6)
  • 49 mm (4)
  • 150 mm (2)
  • 170 mm (2)
  • 28 mm (2)
  • 33 mm (2)
  • 38 mm (2)
  • 43 mm (2)
  • 53.5 mm (4)
  • 55.5 mm (2)
  • 58.5 mm (6)
  • 60.5 mm (2)
  • 63.5 mm (12)
  • 65.5 mm (2)
  • 66.5 mm (4)
  • 68.5 mm (4)
  • 73.5 mm (4)
  • 138.15 mm (2)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (6)
  • 140.55 mm (4)
  • 152.4 mm (4)
  • 158.15 mm (2)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 165.951 mm (2)
  • 177.8 mm (2)
insertGeometry
Shape
Shape
  • PRISMATIC (127)
Insert Seat Size
Insert Seat Size
  • 0 (127)
Cutting Edge Length
Cutting Edge Length
  • 0.426 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.419 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (362)
backEnd
Connection Type
Connection Type
  • BORING BAR (52)
  • SQUARE SHANK (148)
System Size
System Size
  • KM40TS (4)
  • KM4X63 (4)
  • KM50TS (8)
  • KM63TS (8)
  • KM63XMZ (8)
  • KM80ATC (8)
  • KM80TS (8)
  • PSC40 (4)
  • PSC50 (8)
  • PSC63 (8)
  • PSC80 (8)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (6)
  • 25.401 mm (6)
  • 31.701 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (6)
  • 1.0 in (6)
  • 1.248 in (1)
  • 1.25 in (3)
  • 1.26 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

溝入れおよび突っ切り加工

溝入れ加工および突っ切り加工 • 角シャンク
(74 Products)
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
  • Cut-OffCut-Off
  • O.D. Deep GroovingO.D. Deep Grooving
  • Through Coolant: GroovingThrough Coolant: Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [H1] Cutting Height [H1] Cutting Height [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [FS] Secondary F Dimension [FS] Secondary F Dimension [LH] Head Length [LH] Head Length [CS] Coolant Supply Size Clamp Screw ID Drive Size
5939452 EVSMR2020K0316C EVSMR2020K0316C 3 16.0000 .6300 20.0000 .7870 20.0000 .7870 20.0000 .7870 29.0000 1.142 125.0000 4.921 18.6100 .7330 37.0000 1.457 M8X1 T30  
    List price:
    $202.94 /each.
    Your price::
    Qty
    5939450 EVSMR2020K0416C EVSMR2020K0416C   4 16.0000 .6300 20.0000 .7870 20.0000 .7870 20.0000 .7870 29.0000 1.142 125.0000 4.921 18.1100 .7130 37.0000 1.457 M8X1 T30
      List price:
      $202.94 /each.
      Your price::
      Qty
      5939449 EVSMR2020K0422C EVSMR2020K0422C 4 22.0000 .8660 20.0000 .7870 20.0000 .7870 20.0000 .7870 29.5000 1.161 125.0000 4.921 18.1100 .7130 43.0000 1.693 M8X1 T30  
        List price:
        $202.94 /each.
        Your price::
        Qty
        5939447 EVSMR2525M0326C EVSMR2525M0326C 3 26.0000 1.024 25.0000 .9840 25.0000 .9840 25.0000 .9840 35.0000 1.378 150.0000 5.906 23.6100 .9300 47.0000 1.850 G1/8 T30  
          List price:
          $210.31 /each.
          Your price::
          Qty
          5939446 EVSMR2525M0416C EVSMR2525M0416C 4 16.0000 .6300 25.0000 .9840 25.0000 .9840 25.0000 .9840 34.0000 1.339 150.0000 5.906 23.1100 .9100 37.0000 1.457 G1/8 T30  
            List price:
            $210.31 /each.
            Your price::
            Qty
            5939445 EVSMR2525M0426C EVSMR2525M0426C 4 26.0000 1.024 25.0000 .9840 25.0000 .9840 25.0000 .9840 35.0000 1.378 150.0000 5.906 23.1100 .9100 47.0000 1.850 G1/8 T30  
              List price:
              $210.31 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              溝入れおよび突っ切り加工

              Grooving, and Cut-Off • Square Shank
              (74 Products)
              • TurningTurning
              • ProfilingProfiling
              • FacingFacing
              • ChamferingChamfering
              • GroovingGrooving
              • Cut-OffCut-Off
              • O.D. Deep GroovingO.D. Deep Grooving
              • Through Coolant: GroovingThrough Coolant: Grooving
              View Products
              SAP Material Number ISO Catalog Number