Country

言語

測定の単位

定価:

割引: %

定価:

$436.09 /各

価格::

数量

Shoulder milling cutter for high-speed aluminum machining.

5720 Series • End Mill • Screw-On • Inch

Name: 5720 Series • End Mill • Screw-On • Inch
SKU: 5672719
Rating: 0 (0 reviews)

Shoulder milling cutter for high-speed aluminum machining.

メートル

インチ

SAP Material Number	5672719
ISO Catalog Number	A5720VZ16SA1.25Z2R2
ANSI Catalog Number	A5720VZ16SA1.25Z02R2
[D1] Effective Cutting Diameter	31.75 mm
[D1] Effective Cutting Diameter	1.25 in
[D] Adapter / Shank / Bore Diameter	29 mm
[D] Adapter / Shank / Bore Diameter	1.141 in
[DPM] Pilot Diameter Machine Side	17 mm
[DPM] Pilot Diameter Machine Side	.6693 in
[G3X] Connection Thread Size External	M16
[L2] Head Length	50 mm
[L2] Head Length	1.968 in
[WF] Width of Flat	24 mm
[WF] Width of Flat	.9449 in
[AP1MAX] 1st Maximum Cutting Depth	16 mm
[AP1MAX] 1st Maximum Cutting Depth	.6299 in
Number of Inserts	2
[Z] Number of Flutes	2
Maximum Ramping Angle	11.5
Weight Pounds	0.45
Max RPM	41500

すべての改良品を表示

使用法と用途

Spiral Circular
フェイスミーリング
ヘリカルミーリング
ランピング加工：ブランク
シャンク — スクリューオン
ミーリング — スルークーラント
ポケット溝加工
カウンタボーリング
Inclined Square End Mill

ワーク材料

K Cast Iron

N Non-Ferrous

特徴と利点

For pocketing and profiling in aluminum and aluminum alloys.

Maximum stability in high-speed applications.

Excellent choice for components with thin walls due to low cutting pressure.

Internal coolant supply.

Reinforced pockets for high feed applications and ramping, increasing tool and productivity.

機械側

荷重...

ワーク側

荷重...

インサート選択の手引き

5720 Series • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	.F..721	GH1	.F..721	GH1	.F..721	GH1
N3	.F..721	GH1	.F..721	GH1	.F..721	GH1
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

推奨送り量の開始値 [mm]

5720 Series • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

5720 Series • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
...FR721	0,12	0.45	0.81	0,08	0.33	0.58	0,06	0.25	0.43	0,06	0.21	0.38	0,05	0.2	0.35
...ER721	0.15	0.50	0.92	0.11	0.36	0.66	0.08	0.27	0.5	0.07	0,24	0.43	0.07	0,22	0,40
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

推奨切削速度の開始値 [m/min]

5720 Series • Recommended Starting Speed [m/min]
Grade		GH1
Chip Thickness hex mm		Min		Max
Material Group		Max	Start	Min
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	215	140	120
	2	195	120	100
	3	180	105	80
N	1	795	695	600
	2	615	520	425
	3	615	520	425
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

5720 Series • Recommended Starting Speed [SFM]
Grade		GH1
Chip Thickness hex Inch		Min		Max
Material Group		Max	Start	Min
P	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
	5	–	–	–
	6	–	–	–
M	1	–	–	–
	2	–	–	–
	3	–	–	–
K	1	705	460	395
	2	640	395	330
	3	590	345	260
N	1	2610	2280	1970
	2	2020	1705	1395
	3	2020	1705	1395
S	1	–	–	–
	2	–	–	–
	3	–	–	–
	4	–	–	–
H	1	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加

5720 Series • End Mill • Screw-On • Inch