Country

言語

測定の単位

定価:

割引: %

定価:

$1,020.83 /各

価格::

数量

Slot milling cutter for multiple materials

KVNS™ A2™ • Arbor Mount • Metric

Name: KVNS™ A2™ • Arbor Mount • Metric
SKU: 1246129
Rating: 0 (0 reviews)

Slot milling cutter for multiple materials

メートル

インチ

SAP Material Number	1246129
ISO Catalog Number	4.9708014
ANSI Catalog Number	4.9708014
[BM] Cutting Width Minimum	4 mm
[BM] Cutting Width Minimum	.1575 in
[D1] Effective Cutting Diameter	80 mm
[D1] Effective Cutting Diameter	3.15 in
[CDX] Radial Maximum Depth of Cut	21 mm
[CDX] Radial Maximum Depth of Cut	.8268 in
[D] Adapter / Shank / Bore Diameter	16 mm
[D] Adapter / Shank / Bore Diameter	.6299 in
[THUB] Hub Thickness	3.4 mm
[THUB] Hub Thickness	.1339 in
Number of Inserts	6
Weight Kilograms	0.1
Gage Insert	3.90040___
Max RPM	4000

すべての改良品を表示

使用法と用途

溝加工：AE/AP寸法付き側面

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

特徴と利点

Self-clamping insert seat with fixed stop.

Excellent for all flat-bottom slotting and cut-off operations.

Two drive rings required for each cutter body. They must be ordered separately, and in pairs of two.

For cutter diameters 200mm and 250mm support rings are optional (instead of drive rings). Support rings also must be ordered separately, and in pairs of two.

機械側

荷重...

ワーク側

荷重...

インサート選択の手引き

KVNS™ A2™ Slotting Cutters • Insert Selection Guide
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)				(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1-P2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
P3-P4	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
P5-P6	.S..GD	KCPK30	.S..GB	KCPK30	.S..GB	KCPK30
M1-M2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
M3	.S..GD	KCPK30	.S..GB	KCPK30	.S..GB	KCPK30
K1-K2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
K3	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
N1-N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1-S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

推奨送り量の開始値 [mm]

KVNS™ A2™ Series • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.S..GD	0,23	0,46	0,71	0,17	0,33	0,51	0,13	0,25	0,38	0,11	0,22	0,33	0,10	0,20	0,30
.S..GB	0,23	0,46	0,74	0,17	0,33	0,54	0,13	0,25	0,40	0,11	0,22	0,35	0,10	0,20	0,32
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Recommended Starting Feeds [IPT]

KVNS™ A2™ Series • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.S..GD	0.009	0.017	0.026	0.007	0.013	0.019	0.005	0.009	0.014	0.004	0.008	0.012	0.004	0.008	0.011
.S..GB	0.009	0.017	0.028	0.007	0.013	0.020	0.005	0.009	0.015	0.004	0.008	0.013	0.004	0.008	0.012
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

推奨切削速度の開始値 [m/min]

KVNS™ A2™ Series • Recommended Starting Speed [m/min]
Grade		KCPK30			KMF
Chip Thickness hex mm		Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min
P	1	455	395	370	–	–	–
	2	280	255	230	–	–	–
	3	255	230	205	–	–	–
	4	225	185	160	–	–	–
	5	190	170	150	–	–	–
	6	160	135	110	–	–	–
M	1	205	185	155	–	–	–
	2	185	160	140	–	–	–
	3	145	130	115	–	–	–
K	1	295	265	240	–	–	–
	2	235	210	190	–	–	–
	3	195	175	160	–	–	–
N	1	–	–	–	335	298	271
	2	–	–	–	335	298	271
	3	–	–	–	219	198	170
S	1	–	–	–	30	24	20
	2	–	–	–	30	24	20
	3	–	–	–	30	24	20
	4	50	45	35	24	24	24
H	1	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

Recommended Starting Speeds [SFM]

KVNS™ A2™ Series • Recommended Starting Speed [SFM]
Grade		KCPK30			KMF
Chip Thickness hex Inch		Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min
P	1	1495	1295	1215	–	–	–
	2	920	835	755	–	–	–
	3	835	755	675	–	–	–
	4	740	605	525	–	–	–
	5	625	560	490	–	–	–
	6	525	445	360	–	–	–
M	1	675	605	510	–	–	–
	2	605	525	460	–	–	–
	3	475	425	375	–	–	–
K	1	970	870	785	–	–	–
	2	770	690	625	–	–	–
	3	640	575	525	–	–	–
N	1	–	–	–	1100	980	890
	2	–	–	–	1100	980	890
	3	–	–	–	720	650	560
S	1	–	–	–	100	80	65
	2	–	–	–	100	80	65
	3	–	–	–	100	80	65
	4	165	150	115	80	80	80
H	1	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加

KVNS™ A2™ • Arbor Mount • Metric

Slot milling cutter for multiple materials

使用法と用途

ワーク材料

特徴と利点

機械側

ワーク側

インサート選択の手引き

推奨送り量の開始値 [mm]

Recommended Starting Feeds [IPT]

推奨切削速度の開始値 [m/min]

Recommended Starting Speeds [SFM]

提案製品

Product Family suggestions

営業チームにお問い合わせください

通知

営業チームにお問い合わせください

Sending to SolidCAM in progress...

KVNS™ A2™ • Arbor Mount • Metric

Slot milling cutter for multiple materials

使用法と用途

ワーク材料

特徴と利点

機械側

ワーク側

インサート選択の手引き

推奨送り量の開始値 [mm]

Recommended Starting Feeds [IPT]

推奨切削速度の開始値 [m/min]

Recommended Starting Speeds [SFM]

The following files are available