Country

言語

測定の単位

定価:

割引: %

定価:

$950.12 /各

価格::

数量

SDS

KCRA - RN • Face Mills • Inch

Name: KCRA - RN • Face Mills • Inch
SKU: 5703937
Rating: 0 (0 reviews)

Face Mills

メートル

インチ

SAP Material Number	5703937
ISO Catalog Number	KCRA200RN4306S075L175
ANSI Catalog Number	KCRA200RN4306S075L175
[D1MAX] Maximum Cutting Diameter	50.8 mm
[D1MAX] Maximum Cutting Diameter	2 in
[D1] Effective Cutting Diameter	38.1 mm
[D1] Effective Cutting Diameter	1.5 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D6] Hub Diameter	42 mm
[D6] Hub Diameter	1.653 in
[L] Overall Length	44.45 mm
[L] Overall Length	1.75 in
[AP1MAX] 1st Maximum Cutting Depth	6.35 mm
[AP1MAX] 1st Maximum Cutting Depth	.25 in
Number of Inserts	6
Max RPM	23400
Weight Pounds	0.92
Gage Insert	RNGN120400

すべての改良品を表示

使用法と用途

Milling - Pressurized Air Coolant
フェイスミーリング
側面加工／ショルダー加工：ボールノーズ
ミーリング — 側面および正面

ワーク材料

P Steel

S High-Temp Alloys

特徴と利点

First choice for face and shoulder milling high-temperature alloys.

Higher material removal rate due to fine pitch cutters.

Secure clamping system, improving process stability and reliability.

Effective air coolant feature. Better chip flow and increased insert tool life.

機械側

荷重...

ワーク側

荷重...

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.EGN	KYS30	.EGN	KYS30	.TGN	KYS30
S3	.EGN	KYSP30	.EGN	KYSP30	.TGN	KYSP30
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.003	.004	.005	.003	.003	.003	.002	.002	.003	.002	.002	.003	.002	.002	.003	.EGN
.TGN	.005	.007	.008	.004	.005	.006	.003	.004	.005	.003	.004	.005	.003	.004	.005	.TGN

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.004	.004	.005	.003	.003	.004	.003	.003	.003	.002	.003	.003	.002	.003	.003	.EGN
.TGN	.006	.008	.009	.004	.006	.007	.004	.005	.006	.004	.005	.005	.003	.005	.005	.TGN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.007	.008	.009	.005	.006	.007	.005	.005	.006	.004	.005	.006	.004	.005	.006	.EGN
.TGN	.010	.014	.016	.008	.010	.012	.007	.009	.010	.006	.008	.010	.006	.008	.010	.TGN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.005	.006	.007	.004	.004	.005	.003	.004	.004	.003	.003	.004	.003	.003	.004	.EGN
.TGN	.008	.010	.012	.006	.008	.009	.005	.007	.008	.005	.006	.007	.005	.006	.007	.TGN

インサートアセンブリの手引き

Safety Notes
<="" td="">	<="" td="">	<="" td="">	<="" td="">	<="" td="">	<="" td="" />
Read all instructions carefully	Wear eye protection	Inspect and tighten fasteners regularly	Warning: Cutting hazard	Warning: Hot surfaces	Do not exceed maximum RPM

Assembly Instructions
Assemble STCM-25 screw to KW1008 wedge, 1 to 1 1/2 turns.	Wedge/screw assembly.
<="" td="">	<="" td="" />
Install wedge/screw assembly into cutter body, but maintain assembly gap for installing insert.	Slide insert, RNGN12... into pocket and torque wedge/insert assembly to 3,5 Nm (31 in/lbs). Repeat for each pocket.
<="" td="">	<="" td="" />

Recommended Starting Speeds [SFM]

Material Group		KYS30			KYSP30
P	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
	4	–	–	–	–	–	–
	5	–	–	–	–	–	–
	6	–	–	–	–	–	–
M	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
K	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
N	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
S	1	2640	2160	1680	2640	2160	1680
	2	2640	2160	1680	2640	2160	1680
	3	3840	3120	2400	3840	3120	2400
	4	–	–	–	–	–	–
H	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加