Sold in pkg. of 0
New customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InShip-to
Change Account
New customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InShip-to
Change Account
Notifications
Mark all as readWorkpiece Materials
C
CFRP Materials
Machine Side
loading...
Workpiece Side
loading...
Grades
-
KCC05C CFRP Materials
nominal size range | D1 tolerance m7 | D tolerance h6 |
1–3 | 0,002/0,012 | 0,000/-0,006 |
3–6 | 0,004/0,016 | 0,000/-0,008 |
6–10 | 0,006/0,021 | 0,000/-0,009 |
10–18 | 0,007/0,025 | 0,000/-0,011 |
18–25,4 | 0,008/0,029 | 0,000/-0,013 |
nominal size range | D1 tolerance m7 | D tolerance h6 |
.0394–.1181 | .0001/.0005 | .0000/-.0002 |
.1181–.2362 | .0002/.0006 | .0000/-.0003 |
.2362–.3937 | .0002/.0008 | .0000/-.0004 |
.3937–.7087 | .0003/.0010 | .0000/-.0004 |
.7087–1.0000 | .0003/.0011 | .0000/-.0005 |
Material Group | |||||||||||||
Cutting Speed vc | Metric | ||||||||||||
Range m/min | Recommended Feed Rate per Rev | ||||||||||||
min | Starting Value | max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
C | 2 | 80 | 120 | 150 | mm/r | 0,010,05 | 0,020,07 | 0,030,10 | 0,040,12 | 0,050,15 | 0,050,18 | 0,060,21 | 0,070,23 |
3 | 10 | 15 | 25 | mm/r | 0,010,05 | 0,020,07 | 0,030,10 | 0,040,12 | 0,050,15 | 0,050,18 | 0,060,21 | 0,070,23 | |
4 | 10 | 25 | 50 | mm/r | 0,010,05 | 0,020,07 | 0,030,10 | 0,040,12 | 0,050,15 | 0,050,18 | 0,060,21 | 0,070,23 |
Material Group | Cutting Speed vc | Inch | |||||||||||
Range SFM | Recommended Feed Rate per Rev | ||||||||||||
min | Starting Value | max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
C | 2 | 260 | 390 | 490 | IPR | .001.002 | .001003 | .001.004 | .002.005 | .002.006 | .002.007 | .002.008 | .003.009 |
3 | 30 | 50 | 80 | IPR | .001.002 | .001003 | .001.004 | .002.005 | .002.006 | .002.007 | .002.008 | .003.009 | |
4 | 30 | 80 | 160 | IPR | .001.002 | .001003 | .001.004 | .002.005 | .002.006 | .002.007 | .002.008 | .003.009 |
-
HiPACS: Fastener Hole Drilling & Countersinking System