Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Shrink Fit Toolholders General Purpose (GP)
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

TT HPV-CVフォームB/AD

Shrink Fit Toolholders General Purpose (GP)

メートル
インチ
SAP Material Number 3615200
ISO Catalog Number CV50HPVTT100800
ANSI Catalog Number CV50HPVTT100800
[D1] Adapter / Shank / Bore Diameter 25.4 mm
[D1] Adapter / Shank / Bore Diameter 1 in
[D2] Body Diameter 1 Workpiece Side 44 mm
[D2] Body Diameter 1 Workpiece Side 1.732 in
[D21] Body Diameter 2 Workpiece Side 52.9 mm
[D21] Body Diameter 2 Workpiece Side 2.083 in
Max Diameter Taper Angle [D22] 59.76 mm
Max Diameter Taper Angle [D22] 2.353 in
[L1] Gage Length 203.2 mm
[L1] Gage Length 8 in
[L2] Usable Length 70.104 mm
[L2] Usable Length 2.76 in
[L21] Usable Length 168.275 mm
[L21] Usable Length 6.625 in
[L9] Clamping Length 47 mm
[L9] Clamping Hole Length 1.85 in
[V] Adjustment Range 10 mm
[V] Adjustment Range .3937 in
Stop Screw ID Drive Size 8 mm
Weight Kilograms 5.45
すべての改良品を表示

使用法と用途

  • シャンク — 1"–8 UNC引っ張り棒シャンク — 1"–8 UNC引っ張り棒
  • 精度 — 3 μm以下精度 — 3 μm以下
  • 穴あけ加工 — スルークーラント穴あけ加工 — スルークーラント
  • シャンク — ストレート プレーン ≤h6シャンク — ストレート プレーン ≤h6
  • シャンク — ストレート Weldon® ≤h6シャンク — ストレート Weldon® ≤h6
  • シャンク — ストレート Whistle Notch™ ≤h6シャンク — ストレート Whistle Notch™ ≤h6
  • シャンク — SK CAT(CV) ANSI B5.50シャンク — SK CAT(CV) ANSI B5.50
  • 軸方向調整 — エンド軸方向調整 — エンド
  • バランス — G 6.3@15,000 min-1バランス — G 6.3@15,000 min-1
  • シャンク — SK CAT(CV) ANSI B51/–8"–11 UNC引っ張り棒シャンク — SK CAT(CV) ANSI B51/–8"–11 UNC引っ張り棒
  • バランス — G 6.3@15,000 min-1バランス — G 6.3@15,000 min-1
  • シャンク — SK CAT(CV) ANSI B55/8"–11 UNC引っ張り棒シャンク — SK CAT(CV) ANSI B55/8"–11 UNC引っ張り棒

特徴と利点

  • Balanceable — fine tune with optional M6 set screws.

  • Suitable for carbide and HSS cutting tools (requirements below).

機械側

荷重...

ワーク側

荷重...
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?