Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Shrink Fit Toolholders High Torque (HT)
Shrink Fit Toolholders High Torque (HT)
Shrink Fit Toolholders High Torque (HT)
Shrink Fit Toolholders High Torque (HT)
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

TT-HSKフォームF(ピン)

Shrink Fit Toolholders High Torque (HT)

メートル
インチ
SAP Material Number 2952223
ISO Catalog Number HSK80FPTTHT100350
ANSI Catalog Number HSK80FPTTHT100350
[D2] Body Diameter 1 Workpiece Side 45 mm
[D2] Body Diameter 1 Workpiece Side 1.772 in
[D21] Body Diameter 2 Workpiece Side 52.9 mm
[D21] Body Diameter 2 Workpiece Side 2.08 in
[L1] Gage Length 88.9 mm
[L1] Gage Length 3.5 in
[L2] Usable Length 60 mm
[L2] Usable Length 2.362 in
[L9] Clamping Length 44 mm
[L9] Clamping Hole Length 1.732 in
[V] Adjustment Range 5 mm
[V] Adjustment Range .2 in
Stop Screw ID Drive Size 8 mm
Weight Pounds 3.96
[D1] Adapter / Shank / Bore Diameter 25.4 mm
[D1] Adapter / Shank / Bore Diameter 1 in
すべての改良品を表示

使用法と用途

  • 精度 — 3 μm以下精度 — 3 μm以下
  • 穴あけ加工 — スルークーラント穴あけ加工 — スルークーラント
  • シャンク — ストレート プレーン ≤h6シャンク — ストレート プレーン ≤h6
  • シャンク — ストレート Weldon® ≤h6シャンク — ストレート Weldon® ≤h6
  • シャンク — ストレート Whistle Notch™ ≤h6シャンク — ストレート Whistle Notch™ ≤h6
  • 軸方向調整 — エンド軸方向調整 — エンド
  • シャンク— HSK DIN 69893フォームFシャンク— HSK DIN 69893フォームF
  • バランス — G 2.5@33,000 min-1バランス — G 2.5@33,000 min-1

特徴と利点



  • Suitable for carbide only, designated by groove in front face (requirements below).

  • 10 kW power or greater Shrink Fit device must be used.

機械側

荷重...

ワーク側

荷重...
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?