KMT_SafetyMan_1

1. Wear approved Personal Protection Equipment (PPE), including:

  • Eye and ear protection
  • Steel-toed shoes
  • Protective helmets
  • Gloves
  • Vest
KMT_TrenchingSafety_Graphic2

2. Make sure tools are properly seated and securely retained. 

KMT_TrenchingSafety_Graphic3

3. Exercise care when removing tools.

Print

4. Operate all machines with safety in mind. Stand clear of machines in use and make sure protective guards are in place.

Print

5. Do not change tools when the cutting chain, drum, or wheel is moving or still engaged.

Print

6. Allow machine to cool and always wear protective gloves to inspect or touch conicals.

Print

7. Inspect tools daily. Do not use dull, cracked, burred, or bent tools.

IMPORTANT

Many injuries occur during tool change-out in construction and surface mining sites. Kennametal recommends the installer be equipped with the appropriate Personal Protective Equipment (PPE) for each task. Using Kennametal tools to install conicals is recommended. If proper tools are not used, the clip retaining strength could be weakened and could result in lost tool and machine productivity.
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?