Read More

Kennametal offers a wide range of metalforming products, including heading dies, EDM blocks, specialty blanks, and wire, bar, and tub drawing.

Heading Dies

Cold-forming tools like heading dies are designed to sustain high and repeated stress. Tungsten carbide makes the use of cold-forming technology possible for mass production of high-volume parts like screws, bolts, and rivets. Kennametal’s specialty grades make it possible for our heading dies to last a long time and deliver superior part accuracy.

Características e benefícios

  • Standard offering in sintered unground condition, with optional skim grinding of outside diameter.
  • Sizes Ø8mm x 6mm to Ø60mm x 100mm height.
  • Custom die blanks, semi-finished & finished dies are available by request.
  • Greatly improved dimensional consistency of parts due to excellent transverse rupture strength and pressure resistance
  • Uniform binder phase and content means substantially higher overall strength
  • Outstanding tool life and wear resistance

EDM Blocks

Kennametal offers a large selection of conventional and low-corrosion rectangular EDM blanks in stock. Blocks are available in standard sizes and are individually packaged for easy delivery and handling.

Withstand Extensive EDM

Our latest grades for EDM blocks were developed with a proprietary binder system and maintain the hardness and mechanical properties of our conventional grades. They resist the corrosion, pitting, and cracking commonly experienced during electrical discharge machining, especially in thick punches and large die segments.

Para obter mais informações:

Wire, Bar, and Tube Drawing

The wire, bar, and tube drawing process creates challenging friction conditions from the high flow speeds of the carbide through the die. Kennametal offers tungsten carbide that has exceptionally high strength and excellent performance in these high-friction conditions. Our carbide is available in a range of grades and in die pellets in the following sizes:

  • Drawing wire from Ø0.2 to 70mm
  • Drawing steel and non-ferrous bars from Ø10 to 75mm
  • Drawing tubes from Ø10 to 120mm
  • All die pellets available according to ISO standards

Specialty Blanks

We offer a wide assortment specialty blanks, including:

  • Preformed and unfinished tools, dies, die sections and components made from tungsten carbide
  • A range of grades from submicron to extra-coarse
  • A variety of leading-edge binder formulas

Kennametal specially engineered tungsten carbide components can last more than 10 times longer than steel in most applications.

We engineer our carbide components from a wide assortment of grades so you get the right grade for the right job. Our flexible manufacturing capability means we can make anything from the simplest part to complex custom shapes.

We also can develop and test new tungsten carbide grades that are tailored to your specific needs.

Capabilities include:

  • Compacting Dies
  • Forming Dies
  • Stamping Dies
  • Drawing Dies

 

  • Rod Mill Rolls
  • Impact Tools
  • EDM Blanks

 

  • Slitter Knives
  • Container Tooling
  • Cold Forming Tools


EDM Blocks Brochure

Check out our brochure for additional information on EDM Blocks.

View Now
Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Over All Length [L]
Over All Length [L]
  • 4.134 in (196)
  • 4.724 in (28)
  • 5.906 in (8)
  • 5.969 in (14)
  • 7.941 in (2)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 105.0 mm (196)
  • 120.0 mm (28)
  • 150.0 mm (8)
  • 151.6 mm (14)
  • 201.701 mm (2)
Over All Length [L] Min a Over All Length [L] Max
Overall Width
Overall Width
  • 2.205 in (28)
  • 2.803 in (2)
  • 3.988 in (14)
  • 4.134 in (196)
  • 5.906 in (8)
Overall Width Min a Overall Width Max
Overall Width
Overall Width
  • 56.0 mm (28)
  • 71.2 mm (2)
  • 101.301 mm (14)
  • 105.0 mm (196)
  • 150.0 mm (8)
Overall Width Min a Overall Width Max
Thickness
Thickness
  • 1.0 mm (4)
  • 1.5 mm (6)
  • 2.0 mm (5)
  • 2.5 mm (6)
  • 3.0 mm (5)
  • 3.5 mm (5)
  • 4.0 mm (5)
  • 4.5 mm (5)
  • 5.0 mm (6)
  • 5.5 mm (5)
  • 6.0 mm (4)
  • 6.5 mm (7)
  • 7.0 mm (5)
  • 7.5 mm (5)
  • 8.0 mm (6)
  • 8.5 mm (8)
  • 9.0 mm (4)
  • 9.5 mm (5)
  • 10.0 mm (6)
  • 10.5 mm (6)
  • 11.0 mm (3)
  • 11.5 mm (2)
  • 12.0 mm (8)
  • 12.5 mm (5)
  • 13.0 mm (1)
  • 13.5 mm (2)
  • 14.0 mm (2)
  • 14.5 mm (3)
  • 15.0 mm (6)
  • 15.5 mm (2)
  • 16.0 mm (4)
  • 16.5 mm (2)
  • 17.0 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (3)
  • 18.5 mm (1)
  • 19.0 mm (3)
  • 19.5 mm (1)
  • 20.0 mm (6)
  • 20.5 mm (4)
  • 21.0 mm (3)
  • 22.0 mm (2)
  • 23.0 mm (4)
  • 24.0 mm (1)
  • 25.0 mm (6)
  • 25.5 mm (2)
  • 26.0 mm (2)
  • 28.5 mm (2)
  • 30.0 mm (5)
  • 30.6 mm (2)
  • 32.0 mm (2)
  • 35.0 mm (4)
  • 38.0 mm (1)
  • 40.0 mm (2)
  • 41.5 mm (1)
  • 44.5 mm (1)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (2)
  • 51.0 mm (3)
  • 52.0 mm (1)
  • 53.0 mm (1)
  • 53.5 mm (1)
  • 54.0 mm (1)
  • 55.0 mm (3)
  • 55.5 mm (2)
  • 57.0 mm (2)
  • 58.0 mm (1)
  • 60.0 mm (4)
  • 60.5 mm (2)
  • 63.2 mm (2)
  • 63.5 mm (2)
  • 65.0 mm (1)
  • 70.0 mm (2)
  • 76.5 mm (2)
  • 85.5 mm (2)
  • 89.0 mm (2)
Thickness Min a Thickness Max
Thickness
Thickness
  • 0.039 in (4)
  • 0.06 in (6)
  • 0.079 in (5)
  • 0.098 in (6)
  • 0.119 in (5)
  • 0.138 in (5)
  • 0.157 in (5)
  • 0.177 in (5)
  • 0.197 in (6)
  • 0.217 in (5)
  • 0.237 in (4)
  • 0.256 in (7)
  • 0.276 in (5)
  • 0.295 in (5)
  • 0.315 in (6)
  • 0.335 in (8)
  • 0.354 in (4)
  • 0.374 in (5)
  • 0.394 in (6)
  • 0.414 in (6)
  • 0.433 in (3)
  • 0.453 in (2)
  • 0.473 in (8)
  • 0.492 in (5)
  • 0.512 in (1)
  • 0.531 in (2)
  • 0.551 in (2)
  • 0.572 in (3)
  • 0.591 in (6)
  • 0.61 in (2)
  • 0.63 in (4)
  • 0.65 in (2)
  • 0.669 in (1)
  • 0.69 in (1)
  • 0.709 in (3)
  • 0.728 in (1)
  • 0.748 in (3)
  • 0.768 in (1)
  • 0.787 in (6)
  • 0.807 in (4)
  • 0.828 in (3)
  • 0.866 in (2)
  • 0.906 in (4)
  • 0.946 in (1)
  • 0.984 in (6)
  • 1.004 in (2)
  • 1.024 in (2)
  • 1.122 in (2)
  • 1.181 in (5)
  • 1.205 in (2)
  • 1.26 in (2)
  • 1.379 in (4)
  • 1.496 in (1)
  • 1.575 in (2)
  • 1.635 in (1)
  • 1.752 in (1)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.0 in (2)
  • 2.008 in (3)
  • 2.047 in (1)
  • 2.087 in (1)
  • 2.106 in (1)
  • 2.126 in (1)
  • 2.165 in (3)
  • 2.185 in (2)
  • 2.244 in (2)
  • 2.283 in (1)
  • 2.362 in (4)
  • 2.382 in (2)
  • 2.488 in (2)
  • 2.5 in (2)
  • 2.559 in (1)
  • 2.757 in (2)
  • 3.012 in (2)
  • 3.366 in (2)
  • 3.504 in (2)
Thickness Min a Thickness Max
No filters matching ""
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?