Notificações

Marcar todas como lidas
Mobile Menu

Holemaking

Selecionar filtros
Filters
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10895)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10356)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10404)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10407)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10407)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10287)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10645)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10579)
  • M Stainless Steel (8603)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8603)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8603)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8294)
  • K Cast Iron (9435)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9435)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9339)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9339)
  • N Non-Ferrous Materials (7144)
    • N1
      Wrought Aluminum
      (7102)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7108)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7062)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3082)
    • N6
      Carbon, Graphite Composites, CFRP
      (3045)
    • N7
      MMC's
      (2808)
  • S High-Temp Alloys (7875)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7667)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7667)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7673)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7875)
  • H Hardened Materials (3417)
    • H1
      Hardened Materials 44-48 HRC
      (3417)
    • H2
      Hardened Materials 48-55 HRC
      (3120)
    • H3
      Hardened Materials 56-60 HRC
      (1339)
    • H4
      Hardened Materials >60 HRC
      (1339)
  • C CFRP Materials (192)
    • C1
      CFRP, CFRP / CFRP
      (82)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (177)
    • C3
      CFRP / Titanium CFRP / High Temp
      (177)
    • C4
      CFRP / Stainless Steel
      (177)
Selecione First Choice
  • BR (363)
  • CN (1806)
  • DE (1824)
  • GB (1177)
  • IN (542)
  • SG (721)
  • US (2237)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (249)
  • Blind Hole Finishing Blind Hole Finishing (348)
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (827)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (196)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1190)
  • Counterboring Counterboring (365)
  • Countersinking Countersinking (378)
  • Cross Hole Drilling Cross Hole Drilling (2799)
  • Drilling Drilling (9287)
  • Flat Bottom Drilling Flat Bottom Drilling (202)
  • Grooving Grooving (1)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • ID Thread Turning ID Thread Turning (37)
  • Inclined Entry Drilling Inclined Entry Drilling (1592)
  • Inclined Exit Drilling Inclined Exit Drilling (4157)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Stacked Plates Drilling Stacked Plates Drilling (7120)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (178)
  • Through Hole Finishing Through Hole Finishing (272)
  • X-Offset Drilling X-Offset Drilling (461)
Cutting Diameter
Cutting Diameter
  • 0.157 in (69)
  • 0.177 in (67)
  • 0.197 in (78)
  • 0.201 in (77)
  • 0.217 in (69)
  • 0.237 in (95)
  • 0.25 in (85)
  • 0.256 in (83)
  • 0.268 in (72)
  • 0.276 in (89)
  • 0.295 in (64)
  • 0.313 in (92)
  • 0.315 in (126)
  • 0.319 in (69)
  • 0.323 in (65)
  • 0.328 in (70)
  • 0.335 in (105)
  • 0.339 in (66)
  • 0.343 in (68)
  • 0.345 in (79)
  • 0.347 in (76)
  • 0.354 in (107)
  • 0.358 in (67)
  • 0.359 in (63)
  • 0.374 in (85)
  • 0.375 in (100)
  • 0.386 in (71)
  • 0.391 in (68)
  • 0.394 in (129)
  • 0.402 in (97)
  • 0.406 in (71)
  • 0.408 in (82)
  • 0.41 in (62)
  • 0.414 in (135)
  • 0.422 in (79)
  • 0.425 in (72)
  • 0.433 in (108)
  • 0.437 in (66)
  • 0.438 in (75)
  • 0.441 in (63)
  • 0.453 in (124)
  • 0.465 in (76)
  • 0.47 in (74)
  • 0.473 in (116)
  • 0.484 in (84)
  • 0.492 in (132)
  • 0.496 in (68)
  • 0.5 in (140)
  • 0.504 in (83)
  • 0.512 in (148)
  • 0.516 in (106)
  • 0.52 in (72)
  • 0.531 in (172)
  • 0.539 in (61)
  • 0.543 in (72)
  • 0.547 in (67)
  • 0.551 in (173)
  • 0.555 in (81)
  • 0.559 in (75)
  • 0.564 in (135)
  • 0.572 in (119)
  • 0.576 in (64)
  • 0.578 in (63)
  • 0.583 in (62)
  • 0.591 in (154)
  • 0.594 in (66)
  • 0.602 in (74)
  • 0.61 in (122)
  • 0.618 in (62)
  • 0.622 in (68)
  • 0.625 in (107)
  • 0.63 in (154)
  • 0.634 in (78)
  • 0.638 in (74)
  • 0.641 in (67)
  • 0.65 in (122)
  • 0.656 in (82)
  • 0.669 in (137)
  • 0.689 in (72)
  • 0.69 in (122)
  • 0.698 in (65)
  • 0.704 in (66)
  • 0.709 in (125)
  • 0.728 in (95)
  • 0.748 in (131)
  • 0.75 in (115)
  • 0.756 in (66)
  • 0.766 in (64)
  • 0.768 in (108)
  • 0.781 in (62)
  • 0.787 in (109)
  • 0.807 in (68)
  • 0.828 in (106)
  • 0.866 in (69)
  • 0.875 in (69)
  • 0.906 in (77)
  • 0.946 in (64)
  • 0.984 in (101)
  • 1.0 in (86)
  • 1.024 in (62)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 4.0 mm (69)
  • 4.5 mm (67)
  • 5.0 mm (78)
  • 5.101 mm (77)
  • 5.5 mm (69)
  • 6.0 mm (95)
  • 6.351 mm (85)
  • 6.5 mm (83)
  • 6.801 mm (72)
  • 7.0 mm (89)
  • 7.5 mm (64)
  • 7.95 mm (92)
  • 8.0 mm (126)
  • 8.1 mm (69)
  • 8.201 mm (65)
  • 8.326 mm (70)
  • 8.5 mm (105)
  • 8.6 mm (66)
  • 8.701 mm (68)
  • 8.725 mm (79)
  • 8.8 mm (76)
  • 9.0 mm (107)
  • 9.1 mm (67)
  • 9.125 mm (63)
  • 9.5 mm (85)
  • 9.525 mm (100)
  • 9.8 mm (71)
  • 9.925 mm (68)
  • 10.0 mm (129)
  • 10.201 mm (97)
  • 10.3 mm (71)
  • 10.326 mm (82)
  • 10.4 mm (62)
  • 10.5 mm (135)
  • 10.726 mm (79)
  • 10.8 mm (72)
  • 11.0 mm (108)
  • 11.101 mm (66)
  • 11.125 mm (75)
  • 11.201 mm (63)
  • 11.5 mm (124)
  • 11.8 mm (76)
  • 11.9 mm (74)
  • 12.0 mm (116)
  • 12.3 mm (84)
  • 12.5 mm (132)
  • 12.601 mm (68)
  • 12.701 mm (140)
  • 12.8 mm (83)
  • 13.0 mm (148)
  • 13.101 mm (106)
  • 13.201 mm (72)
  • 13.5 mm (169)
  • 13.701 mm (61)
  • 13.8 mm (72)
  • 13.9 mm (67)
  • 14.0 mm (173)
  • 14.101 mm (81)
  • 14.201 mm (75)
  • 14.3 mm (135)
  • 14.5 mm (119)
  • 14.601 mm (64)
  • 14.675 mm (63)
  • 14.8 mm (62)
  • 15.0 mm (154)
  • 15.076 mm (66)
  • 15.3 mm (74)
  • 15.5 mm (122)
  • 15.601 mm (61)
  • 15.701 mm (62)
  • 15.8 mm (68)
  • 15.875 mm (107)
  • 16.0 mm (154)
  • 16.1 mm (78)
  • 16.2 mm (74)
  • 16.276 mm (67)
  • 16.5 mm (122)
  • 16.675 mm (73)
  • 17.0 mm (137)
  • 17.475 mm (72)
  • 17.5 mm (122)
  • 17.7 mm (65)
  • 17.85 mm (66)
  • 18.0 mm (125)
  • 18.5 mm (95)
  • 19.0 mm (131)
  • 19.05 mm (115)
  • 19.201 mm (66)
  • 19.451 mm (64)
  • 19.5 mm (108)
  • 20.0 mm (109)
  • 20.5 mm (68)
  • 21.0 mm (106)
  • 22.0 mm (69)
  • 22.225 mm (69)
  • 23.0 mm (77)
  • 24.0 mm (64)
  • 25.0 mm (101)
  • 25.401 mm (86)
  • 26.0 mm (62)
Cutting Diameter Min a Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (143)
  • Interrupted (251)
  • Lightly Interrupted Cut (173)
  • Smooth Cut (285)
  • Stable (367)
  • Unstable (308)
  • Varying Depth of Cut (181)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (22)
  • 9.0 mm (21)
  • 10.0 mm (26)
  • 11.0 mm (21)
  • 12.0 mm (36)
  • 14.0 mm (171)
  • 16.0 mm (12)
  • 17.0 mm (208)
  • 20.0 mm (272)
  • 21.401 mm (33)
  • 22.0 mm (16)
  • 23.0 mm (160)
  • 24.0 mm (174)
  • 25.0 mm (68)
  • 25.5 mm (12)
  • 25.901 mm (13)
  • 27.0 mm (16)
  • 28.3 mm (16)
  • 28.6 mm (37)
  • 29.0 mm (344)
  • 30.0 mm (58)
  • 32.0 mm (13)
  • 33.0 mm (83)
  • 34.7 mm (12)
  • 34.9 mm (53)
  • 35.0 mm (579)
  • 36.0 mm (33)
  • 38.1 mm (22)
  • 39.0 mm (16)
  • 40.0 mm (298)
  • 40.301 mm (45)
  • 41.0 mm (71)
  • 42.0 mm (23)
  • 43.0 mm (558)
  • 43.5 mm (13)
  • 44.0 mm (30)
  • 45.0 mm (219)
  • 48.0 mm (136)
  • 48.7 mm (45)
  • 49.0 mm (333)
  • 50.0 mm (26)
  • 51.0 mm (142)
  • 53.1 mm (34)
  • 54.0 mm (23)
  • 55.0 mm (106)
  • 55.6 mm (26)
  • 56.0 mm (314)
  • 57.0 mm (93)
  • 58.0 mm (18)
  • 60.0 mm (284)
  • 63.0 mm (213)
  • 63.5 mm (19)
  • 64.0 mm (62)
  • 66.0 mm (21)
  • 68.0 mm (24)
  • 69.0 mm (15)
  • 70.0 mm (27)
  • 71.0 mm (148)
  • 72.0 mm (34)
  • 73.0 mm (14)
  • 75.0 mm (33)
  • 76.0 mm (13)
  • 76.2 mm (25)
  • 77.0 mm (113)
  • 78.0 mm (19)
  • 79.0 mm (13)
  • 80.0 mm (137)
  • 84.0 mm (25)
  • 85.0 mm (20)
  • 88.0 mm (14)
  • 88.9 mm (17)
  • 90.0 mm (38)
  • 95.0 mm (17)
  • 96.0 mm (126)
  • 100.0 mm (40)
  • 101.601 mm (16)
  • 104.0 mm (22)
  • 105.0 mm (18)
  • 108.0 mm (20)
  • 110.0 mm (15)
  • 112.0 mm (82)
  • 116.0 mm (16)
  • 117.0 mm (19)
  • 119.0 mm (13)
  • 120.0 mm (51)
  • 125.0 mm (24)
  • 128.0 mm (68)
  • 130.0 mm (21)
  • 136.0 mm (14)
  • 140.0 mm (42)
  • 144.0 mm (58)
  • 150.0 mm (26)
  • 160.0 mm (57)
  • 165.0 mm (16)
  • 168.0 mm (19)
  • 180.0 mm (18)
  • 200.0 mm (17)
  • 210.0 mm (14)
  • 240.0 mm (17)
Maximum Hole Depth [L4] Min a Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (13)
  • 0.237 in (22)
  • 0.354 in (21)
  • 0.394 in (26)
  • 0.433 in (21)
  • 0.473 in (36)
  • 0.551 in (171)
  • 0.63 in (12)
  • 0.669 in (208)
  • 0.787 in (272)
  • 0.843 in (33)
  • 0.866 in (16)
  • 0.906 in (160)
  • 0.946 in (174)
  • 0.984 in (68)
  • 1.004 in (12)
  • 1.02 in (13)
  • 1.063 in (16)
  • 1.114 in (16)
  • 1.127 in (37)
  • 1.143 in (344)
  • 1.181 in (58)
  • 1.26 in (13)
  • 1.299 in (83)
  • 1.366 in (12)
  • 1.374 in (53)
  • 1.379 in (579)
  • 1.417 in (33)
  • 1.5 in (22)
  • 1.536 in (16)
  • 1.575 in (298)
  • 1.587 in (45)
  • 1.614 in (71)
  • 1.655 in (23)
  • 1.693 in (558)
  • 1.713 in (13)
  • 1.732 in (30)
  • 1.772 in (219)
  • 1.891 in (136)
  • 1.917 in (45)
  • 1.929 in (333)
  • 1.969 in (26)
  • 2.008 in (142)
  • 2.091 in (34)
  • 2.126 in (23)
  • 2.165 in (106)
  • 2.189 in (26)
  • 2.205 in (314)
  • 2.244 in (93)
  • 2.283 in (18)
  • 2.362 in (284)
  • 2.48 in (213)
  • 2.5 in (19)
  • 2.52 in (62)
  • 2.598 in (21)
  • 2.677 in (24)
  • 2.717 in (15)
  • 2.757 in (27)
  • 2.795 in (148)
  • 2.835 in (34)
  • 2.874 in (14)
  • 2.953 in (33)
  • 2.992 in (13)
  • 3.0 in (25)
  • 3.031 in (113)
  • 3.071 in (21)
  • 3.11 in (13)
  • 3.15 in (137)
  • 3.307 in (25)
  • 3.346 in (20)
  • 3.465 in (14)
  • 3.5 in (17)
  • 3.543 in (38)
  • 3.74 in (17)
  • 3.781 in (126)
  • 3.938 in (43)
  • 4.0 in (16)
  • 4.094 in (22)
  • 4.134 in (18)
  • 4.252 in (20)
  • 4.331 in (15)
  • 4.409 in (82)
  • 4.567 in (16)
  • 4.606 in (19)
  • 4.686 in (13)
  • 4.724 in (51)
  • 4.921 in (24)
  • 5.039 in (68)
  • 5.118 in (21)
  • 5.354 in (14)
  • 5.513 in (42)
  • 5.67 in (58)
  • 5.906 in (26)
  • 6.299 in (57)
  • 6.496 in (16)
  • 6.614 in (19)
  • 7.087 in (18)
  • 7.875 in (18)
  • 8.268 in (14)
  • 9.449 in (17)
Maximum Hole Depth [L4] Min a Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (13)
  • 0.354 in (22)
  • 0.473 in (23)
  • 0.63 in (19)
  • 0.669 in (33)
  • 0.709 in (15)
  • 0.787 in (176)
  • 0.866 in (40)
  • 0.946 in (169)
  • 0.984 in (15)
  • 1.063 in (31)
  • 1.102 in (416)
  • 1.143 in (14)
  • 1.181 in (42)
  • 1.299 in (14)
  • 1.339 in (184)
  • 1.379 in (40)
  • 1.417 in (207)
  • 1.496 in (33)
  • 1.575 in (70)
  • 1.614 in (154)
  • 1.655 in (12)
  • 1.666 in (13)
  • 1.693 in (55)
  • 1.732 in (267)
  • 1.772 in (12)
  • 1.811 in (24)
  • 1.85 in (303)
  • 1.929 in (76)
  • 1.969 in (53)
  • 2.008 in (31)
  • 2.047 in (25)
  • 2.087 in (360)
  • 2.126 in (44)
  • 2.165 in (283)
  • 2.205 in (114)
  • 2.244 in (20)
  • 2.283 in (12)
  • 2.323 in (18)
  • 2.362 in (257)
  • 2.402 in (339)
  • 2.441 in (12)
  • 2.48 in (22)
  • 2.52 in (14)
  • 2.559 in (190)
  • 2.598 in (44)
  • 2.638 in (97)
  • 2.677 in (26)
  • 2.717 in (13)
  • 2.757 in (39)
  • 2.795 in (293)
  • 2.835 in (14)
  • 2.874 in (139)
  • 2.914 in (61)
  • 2.953 in (13)
  • 2.992 in (30)
  • 3.031 in (222)
  • 3.11 in (109)
  • 3.15 in (14)
  • 3.228 in (31)
  • 3.269 in (219)
  • 3.307 in (13)
  • 3.346 in (23)
  • 3.386 in (25)
  • 3.426 in (20)
  • 3.622 in (118)
  • 3.661 in (145)
  • 3.701 in (17)
  • 3.819 in (23)
  • 3.858 in (15)
  • 3.898 in (15)
  • 3.938 in (21)
  • 3.976 in (125)
  • 4.016 in (13)
  • 4.094 in (14)
  • 4.291 in (13)
  • 4.331 in (109)
  • 4.37 in (16)
  • 4.409 in (17)
  • 4.488 in (14)
  • 4.529 in (15)
  • 4.606 in (32)
  • 4.686 in (17)
  • 4.764 in (15)
  • 4.921 in (13)
  • 5.039 in (66)
  • 5.118 in (20)
  • 5.197 in (22)
  • 5.276 in (13)
  • 5.354 in (21)
  • 5.433 in (17)
  • 5.472 in (14)
  • 5.748 in (67)
  • 5.787 in (23)
  • 6.024 in (15)
  • 6.378 in (18)
  • 6.417 in (54)
  • 7.126 in (32)
  • 7.362 in (20)
  • 7.718 in (15)
Reach Min