Ferramentas de rebaixo

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (86)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(86)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(86)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(86)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(86)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(86)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(86)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(86)
    • M Stainless Steel (86)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(86)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(86)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(86)
    • K Cast Iron (104)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
    • N Non-Ferrous Materials (64)
      • N1
        Wrought Aluminum (64)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(64)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(60)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (64)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (64)
      • N6
        Carbon, Graphite Composites, CFRP (64)
      • N7
        MMC's (59)
    • S High-Temp Alloys (85)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(85)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(85)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(85)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(85)
    • H Hardened Materials (51)
      • H1
        Hardened Materials 44-48 HRC(51)
      • H2
        Hardened Materials 48-55 HRC(51)
      • H3
        Hardened Materials 56-60 HRC(51)
      • H4
        Hardened Materials >60 HRC(51)
    Applications
    Applications
    • CounterboringCounterboring (35)
    • DrillingDrilling (35)
    Cutting Diameter
    Cutting Diameter
    • 0.595 in(1)
    • 0.635 in(1)
    • 0.674 in(1)
    • 0.714 in(2)
    • 0.794 in(2)
    • 0.812 in(1)
    • 0.834 in(2)
    • 0.873 in(2)
    • 0.912 in(2)
    • 0.953 in(2)
    • 0.991 in(2)
    • 1.0 in(1)
    • 1.031 in(1)
    • 1.07 in(1)
    • 1.109 in(1)
    • 1.187 in(1)
    • 1.188 in(1)
    • 1.268 in(1)
    • 1.307 in(1)
    • 1.346 in(1)
    • 1.387 in(1)
    • 1.425 in(1)
    • 1.504 in(1)
    • 1.583 in(1)
    • 1.625 in(1)
    • 1.661 in(1)
    • 1.819 in(1)
    • 2.0 in(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.125 mm(1)
    • 16.125 mm(1)
    • 17.125 mm(1)
    • 18.125 mm(2)
    • 20.175 mm(2)
    • 20.625 mm(1)
    • 21.175 mm(2)
    • 22.175 mm(2)
    • 23.175 mm(2)
    • 24.175 mm(2)
    • 25.175 mm(2)
    • 25.401 mm(1)
    • 26.175 mm(1)
    • 27.175 mm(1)
    • 28.175 mm(1)
    • 30.151 mm(1)
    • 30.175 mm(1)
    • 32.2 mm(1)
    • 33.2 mm(1)
    • 34.2 mm(1)
    • 35.2 mm(1)
    • 36.2 mm(1)
    • 38.2 mm(1)
    • 40.2 mm(1)
    • 41.276 mm(1)
    • 42.2 mm(1)
    • 46.2 mm(1)
    • 50.801 mm(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (20)
    • Stable (69)
    • Unstable (20)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 8.5 mm(2)
    • 11.0 mm(1)
    • 12.701 mm(1)
    • 13.5 mm(3)
    • 15.875 mm(1)
    • 16.0 mm(7)
    • 18.5 mm(1)
    • 19.05 mm(1)
    • 21.0 mm(3)
    • 23.0 mm(2)
    • 23.5 mm(3)
    • 25.401 mm(1)
    • 25.5 mm(3)
    • 27.5 mm(1)
    • 30.0 mm(1)
    • 30.5 mm(1)
    • 31.75 mm(1)
    • 33.5 mm(2)
    Maximum Hole Depth [L4] MinaMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.335 in(2)
    • 0.433 in(1)
    • 0.5 in(1)
    • 0.531 in(3)
    • 0.625 in(1)
    • 0.63 in(7)
    • 0.728 in(1)
    • 0.75 in(1)
    • 0.828 in(3)
    • 0.906 in(2)
    • 0.925 in(3)
    • 1.0 in(1)
    • 1.004 in(3)
    • 1.083 in(1)
    • 1.181 in(1)
    • 1.201 in(1)
    • 1.25 in(1)
    • 1.319 in(2)
    Maximum Hole Depth [L4] MinaMaximum Hole Depth [L4] Max
    Connection Style
    Connection Style
    • Weldon (5)
    • Whistle Notch 2 (30)
    Number of Flutes
    Number of Flutes
    • 2 (12)
    • 3 (23)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (111)
    • 4.0 (15)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.189 in(2)
    • 3.386 in(9)
    • 3.5 in(2)
    • 3.583 in(4)
    • 3.781 in(4)
    • 3.976 in(4)
    • 4.0 in(1)
    • 4.37 in(2)
    • 4.5 in(2)
    • 4.567 in(1)
    • 4.764 in(2)
    • 4.961 in(2)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 81.0 mm(2)
    • 86.0 mm(9)
    • 88.9 mm(2)
    • 91.0 mm(4)
    • 96.0 mm(4)
    • 101.0 mm(4)
    • 101.601 mm(1)
    • 111.0 mm(2)
    • 114.301 mm(2)
    • 116.0 mm(1)
    • 121.0 mm(2)
    • 126.0 mm(2)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(3)
    • 0.016 in(34)
    • 0.024 in(4)
    • 0.031 in(15)
    • 0.039 in(6)
    • 0.047 in(6)
    • 0.063 in(5)
    • 0.079 in(3)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(3)
    • 0.4 mm(34)
    • 0.601 mm(4)
    • 0.8 mm(15)
    • 1.0 mm(6)
    • 1.201 mm(6)
    • 1.6 mm(5)
    • 2.0 mm(3)
    Corner Radius MinaCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(76)
    Corner Chamfer MinaCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(76)
    Corner Chamfer MinaCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CD4 (35)
    • CM4 (35)
    • CS5 (36)
    • KC7140 (39)
    • KC720 (7)
    • KC7210 (35)
    • KC7215 (67)
    • KC7815 (7)
    • KCPK10 (41)
    • KCU25 (48)
    • KCU40 (49)
    • KM1 (41)
    Hand Of Tool
    Hand Of Tool
    • R (35)
    Wiper Insert
    Wiper Insert
    • N (76)
    Drill Type
    Drill Type
    • 86-04 (35)
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (76)
    Insert IC Size
    Insert IC Size
    • 6.351 mm(13)
    • 7.926 mm(16)
    • 9.525 mm(20)
    • 12.701 mm(18)
    • 15.875 mm(9)
    Insert IC Size MinaInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(13)
    • 0.312 in(16)
    • 0.375 in(20)
    • 0.5 in(18)
    • 0.625 in(9)
    Insert IC Size MinaInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.351 mm(13)
    • 7.926 mm(16)
    • 9.525 mm(20)
    • 12.701 mm(27)
    Cutting Edge Length MinaCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.25 in(13)
    • 0.312 in(16)
    • 0.375 in(20)
    • 0.5 in(27)
    Cutting Edge Length MinaCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 20 (33)
    • 21 (30)
    • 22 (4)
    Cutting Tool Material
    Cutting Tool Material
    • H W (76)
    Tolerance Class
    Tolerance Class
    • H (12)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (35)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(2)
    • 20.0 mm(23)
    • 25.401 mm(2)
    • 31.75 mm(1)
    • 32.0 mm(7)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(2)
    • 0.787 in(23)
    • 1.0 in(2)
    • 1.25 in(1)
    • 1.26 in(7)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?