successfully added to cart
View Cart

PSC

Select Filters
Filters
Filters
View filters in
Metric
Mais contatos
keyFilters
Workpiece Material
  • P Steel (380)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (380)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (380)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (380)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (380)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (380)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (380)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (380)
  • M Stainless Steel (380)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (380)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (380)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (380)
  • K Cast Iron (380)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (380)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (380)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (380)
  • N Non-Ferrous Materials (371)
    • N1
      Wrought Aluminum
      (367)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (367)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (236)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (369)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (367)
    • N6
      Carbon, Graphite Composites, CFRP
      (344)
    • N7
      MMC's
      (345)
  • S High-Temp Alloys (380)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (380)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (380)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (380)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (380)
  • H Hardened Materials (334)
    • H1
      Hardened Materials 44-48 HRC
      (334)
    • H2
      Hardened Materials 48-55 HRC
      (292)
    • H3
      Hardened Materials 56-60 HRC
      (260)
    • H4
      Hardened Materials >60 HRC
      (242)
Applications
  • Back Boring Back Boring (350)
  • Chamfer Turning Chamfer Turning (34)
  • Cut-Off Cut-Off (309)
  • Deep Grooving Deep Grooving (336)
  • Face Grooving Face Grooving (350)
  • Facing Facing (323)
  • Grooving Grooving (333)
  • ID Facing ID Facing (323)
  • ID Grooving ID Grooving (350)
  • ID Thread Turning ID Thread Turning (323)
  • Multiple Direction Cutting Multiple Direction Cutting (356)
  • OD Thread Turning OD Thread Turning (323)
  • Plunge Turning Plunge Turning (257)
  • Profiling Profiling (200)
  • TRN Boring TRN Boring (350)
  • Turning Turning (311)
Type of Thread
  • 55 (44)
  • 60 (97)
  • ACME (85)
  • API (58)
  • API BUTTRESS (17)
  • API RD (52)
  • BSPT (27)
  • BSW (69)
  • BUTTRESS (53)
  • M (75)
  • NPT (52)
  • NPTF (27)
  • RD DIN 405 (44)
  • STUB ACME (69)
  • TR DIN 103 (44)
  • UN (80)
  • UNJ (52)
Cutting Condition
  • Heavily Interrupted Cut (316)
  • Interrupted (164)
  • Lightly Interrupted Cut (316)
  • Smooth Cut (316)
  • Varying Depth of Cut (316)
Tool Cutting Edge Angle
  • 45.0 (21)
  • 62.5 (4)
  • 72.5 (3)
  • 75.0 (31)
  • 90.0 (124)
  • 93.0 (82)
  • 95.0 (88)
  • 107.5 (30)
to
Connection Style
  • PSC (259)
Cutting Edges Per Insert
  • 1.0 (224)
  • 2.0 (265)
  • 3.0 (55)
  • 4.0 (195)
  • 6.0 (10)
  • 8.0 (110)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (12)
  • 0.03 (22)
  • 0.038 (53)
  • 0.051 (39)
  • 0.056 (11)
  • 0.057 (13)
  • 0.066 (25)
  • 0.07 (21)
  • 0.076 (69)
  • 0.08 (40)
  • 0.081 (10)
  • 0.082 (3)
  • 0.085 (3)
  • 0.086 (3)
  • 0.089 (24)
  • 0.09 (24)
  • 0.091 (3)
  • 0.094 (25)
  • 0.097 (23)
  • 0.1 (175)
  • 0.102 (131)
  • 0.108 (10)
  • 0.116 (12)
  • 0.117 (13)
  • 0.127 (25)
  • 0.13 (2)
  • 0.131 (25)
  • 0.132 (25)
  • 0.133 (25)
  • 0.135 (3)
  • 0.15 (25)
  • 0.152 (21)
  • 0.155 (25)
  • 0.157 (25)
  • 0.159 (3)
  • 0.16 (26)
  • 0.165 (41)
  • 0.173 (25)
  • 0.178 (28)
  • 0.18 (6)
  • 0.185 (6)
  • 0.19 (53)
  • 0.191 (53)
  • 0.198 (25)
  • 0.2 (191)
  • 0.202 (31)
  • 0.203 (95)
  • 0.21 (21)
  • 0.223 (3)
  • 0.224 (25)
  • 0.235 (25)
  • 0.24 (3)
  • 0.244 (12)
  • 0.25 (25)
  • 0.251 (25)
  • 0.254 (41)
  • 0.255 (12)
  • 0.269 (28)
  • 0.279 (6)
  • 0.282 (25)
  • 0.284 (25)
  • 0.3 (25)
  • 0.305 (12)
  • 0.31 (3)
  • 0.315 (33)
  • 0.318 (44)
  • 0.33 (25)
  • 0.34 (60)
  • 0.343 (34)
  • 0.356 (25)
  • 0.381 (3)
  • 0.394 (2)
  • 0.396 (1)
  • 0.397 (187)
  • 0.4 (228)
  • 0.404 (25)
  • 0.406 (75)
  • 0.43 (25)
  • 0.432 (17)
  • 0.445 (41)
  • 0.472 (12)
  • 0.49 (25)
  • 0.5 (14)
  • 0.508 (25)
  • 0.533 (5)
  • 0.565 (8)
  • 0.57 (13)
  • 0.572 (41)
  • 0.575 (28)
  • 0.6 (8)
  • 0.7 (10)
  • 0.75 (12)
  • 0.76 (3)
  • 0.787 (37)
  • 0.79 (15)
  • 0.791 (8)
  • 0.792 (69)
  • 0.794 (202)
  • 0.795 (1)
  • 0.8 (260)
  • 0.902 (41)
  • 0.93 (6)
  • 0.936 (10)
  • 1.0 (39)
  • 1.01 (3)
  • 1.188 (39)
  • 1.19 (34)
  • 1.191 (190)
  • 1.194 (37)
  • 1.195 (13)
  • 1.2 (250)
  • 1.25 (37)
  • 1.404 (6)
  • 1.5 (37)
  • 1.515 (3)
  • 1.585 (25)
  • 1.587 (34)
  • 1.588 (172)
  • 1.59 (8)
  • 1.6 (184)
  • 1.75 (37)
  • 1.98 (13)
  • 1.981 (25)
  • 2.0 (41)
  • 2.25 (41)
  • 2.38 (20)
  • 2.381 (15)
  • 2.388 (41)
  • 2.39 (8)
  • 2.4 (66)
  • 2.5 (16)
  • 3.175 (16)
  • 3.18 (8)
  • 3.2 (36)
  • 4.0 (17)
  • 5.0 (4)
  • 6.0 (5)
  • 6.35 (4)
  • 7.94 (5)
  • 8.0 (5)
  • 10.0 (4)
to
Corner Radius
  • 0.001 (6)
  • 0.0011 (6)
  • 0.0012 (10)
  • 0.0015 (53)
  • 0.002 (39)
  • 0.0023 (13)
  • 0.0026 (25)
  • 0.0028 (24)
  • 0.003 (69)
  • 0.0031 (40)
  • 0.0032 (13)
  • 0.0033 (3)
  • 0.0034 (3)
  • 0.0035 (24)
  • 0.0037 (25)
  • 0.0038 (23)
  • 0.0039 (3)
  • 0.004 (217)
  • 0.0043 (10)
  • 0.0046 (25)
  • 0.005 (27)
  • 0.0052 (25)
  • 0.0053 (28)
  • 0.0059 (25)
  • 0.006 (46)
  • 0.0062 (25)
  • 0.0063 (13)
  • 0.0065 (41)
  • 0.0068 (25)
  • 0.007 (28)
  • 0.0075 (53)
  • 0.0078 (31)
  • 0.0079 (18)
  • 0.008 (203)
  • 0.0083 (55)
  • 0.0088 (28)
  • 0.0093 (25)
  • 0.0094 (3)
  • 0.0096 (12)
  • 0.0099 (25)
  • 0.01 (41)
  • 0.0106 (28)
  • 0.011 (6)
  • 0.0111 (25)
  • 0.0112 (25)
  • 0.0118 (25)
  • 0.012 (12)
  • 0.0122 (3)
  • 0.0124 (25)
  • 0.0125 (44)
  • 0.013 (60)
  • 0.0135 (47)
  • 0.014 (25)
  • 0.015 (3)
  • 0.0155 (2)
  • 0.0156 (229)
  • 0.0158 (17)
  • 0.0159 (25)
  • 0.016 (155)
  • 0.017 (42)
  • 0.0175 (41)
  • 0.0186 (12)
  • 0.0193 (25)
  • 0.0197 (14)
  • 0.02 (25)
  • 0.021 (5)
  • 0.022 (11)
  • 0.0225 (41)
  • 0.0276 (10)
  • 0.0295 (12)
  • 0.0298 (3)
  • 0.031 (178)
  • 0.0311 (8)
  • 0.0312 (202)
  • 0.0313 (260)
  • 0.0315 (82)
  • 0.0355 (41)
  • 0.0368 (6)
  • 0.0369 (10)
  • 0.0394 (39)
  • 0.0398 (3)
  • 0.0468 (39)
  • 0.0469 (250)
  • 0.047 (209)
  • 0.0472 (40)
  • 0.0492 (37)
  • 0.0516 (15)
  • 0.0553 (6)
  • 0.0591 (37)
  • 0.0597 (3)
  • 0.0625 (237)
  • 0.063 (143)
  • 0.0689 (37)
  • 0.078 (25)
  • 0.0787 (41)
  • 0.0886 (41)
  • 0.0938 (81)
  • 0.094 (81)
  • 0.0984 (16)
  • 0.106 (13)
  • 0.125 (16)
  • 0.126 (36)
  • 0.1563 (34)
  • 0.1575 (17)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.2362 (5)
  • 0.25 (4)
  • 0.312 (35)
  • 0.3125 (5)
  • 0.315 (5)
  • 0.3935 (4)
  • 0.3937 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (146)
  • 241 (34)
  • AC5 (10)
  • CG4 (4)
  • CL4 (115)
  • CM2 (141)
  • CM3 (126)
  • CM4 (69)
  • CM5 (14)
  • CPX (155)
  • CW2 (69)
  • CW2015 (136)
  • CW5025 (148)
  • GH1 (6)
  • GX (80)
  • HCK10 (30)
  • HCK20 (10)
  • HK1500 (138)
  • HK35 (21)
  • HT2 (139)
  • HTX (90)
  • HWK10 (2)
  • HWK15 (29)
  • K060 (64)
  • K090 (160)
  • K1 (61)
  • K1010P (6)
  • K10M (211)
  • K10P (162)
  • K10U (121)
  • K15 (27)
  • K15U (156)
  • K20K (199)
  • K21 (76)
  • K25M (139)
  • K25P (144)
  • K2885 (37)
  • K313 (323)
  • K35P (74)
  • K420 (186)
  • K45 (70)
  • K4H (31)
  • K6 (1)
  • K68 (313)
  • KB1340 (62)
  • KB1345 (118)
  • KB1610 (113)
  • KB1625 (97)
  • KB1630 (118)
  • KB5610 (100)
  • KB5625 (132)
  • KB5630 (89)
  • KB9610 (150)
  • KB9640 (74)
  • KBH10 (154)
  • KBH10B (90)
  • KBH20 (168)
  • KBH20B (90)
  • KBK35 (34)
  • KC210 (126)
  • KC250 (166)
  • KC5010 (355)
  • KC5020P (32)
  • KC5025 (368)
  • KC5410 (298)
  • KC5510 (179)
  • KC5525 (107)
  • KC710 (113)
  • KC720 (278)
  • KC722 (100)
  • KC730 (330)
  • KC7310 (201)
  • KC732 (210)
  • KC8050 (283)
  • KC810 (316)
  • KC850 (329)
  • KC9010 (199)
  • KC9025 (264)
  • KC910 (286)
  • KC9105 (238)
  • KC9110 (332)
  • KC9120 (245)
  • KC9125 (279)
  • KC9125RR (15)
  • KC9140 (187)
  • KC9145 (162)
  • KC9210 (35)
  • KC9215 (183)
  • KC9225 (260)
  • KC9240 (254)
  • KC9240NEW (254)
  • KC9245 (183)
  • KC9315 (283)
  • KC9320 (302)
  • KC9325 (214)
  • KC935 (317)
  • KC950 (278)
  • KC990 (205)
  • KCD25 (94)
  • KCK05 (262)
  • KCK05B (215)
  • KCK15 (243)
  • KCK15B (274)
  • KCK20 (301)
  • KCK20B (307)
  • KCM15 (240)
  • KCM15B (234)
  • KCM25 (272)
  • KCM25B (241)
  • KCM35 (217)
  • KCM35B (162)
  • KCP05 (223)
  • KCP05B (155)
  • KCP10 (276)
  • KCP10B (331)
  • KCP15 (19)
  • KCP25 (281)
  • KCP25B (332)
  • KCP30 (258)
  • KCP30B (193)
  • KCP40 (158)
  • KCP40B (187)
  • KCPK05 (191)
  • KCS10 (110)
  • KCS10B (267)
  • KCU10 (336)
  • KCU25 (328)
  • KD050 (129)
  • KD081 (142)
  • KD100 (127)
  • KD120 (130)
  • KD1400 (106)
  • KD1405 (74)
  • KD1425 (149)
  • KM1 (69)
  • KMF (34)
  • KT1120 (32)
  • KT125 (129)
  • KT150 (88)
  • KT175 (182)
  • KT315 (262)
  • KT325 (139)
  • KT5020 (6)
  • KTP10 (58)
  • KU10 (41)
  • KU10T (238)
  • KU25T (66)
  • KU30T (293)
  • KY1310 (96)
  • KY1320 (148)
  • KY1540 (75)
  • KY1615 (154)
  • KY2000 (95)
  • KY2100 (64)
  • KY3000 (197)
  • KY3400 (123)
  • KY3500 (164)
  • KY4000 (75)
  • KY4300 (80)
  • KY4400 (148)
  • KYHK15B (148)
  • KYK10 (72)
  • KYK25 (107)
  • KYK35 (164)
  • KYS25 (75)
  • KYS30 (83)
  • MC2 (9)
  • NL200 (69)
  • NL250 (177)
  • NL300 (154)
  • NL400 (73)
  • NL920 (129)
  • P25 (76)
  • PB100 (43)
  • PB170 (51)
  • PB250 (57)
  • PB300 (35)
  • PD100 (29)
  • PD50 (21)
  • PN120 (3)
  • PS5 (82)
  • SP0819 (128)
  • SP0A00 (15)
  • SP0G00 (1)
  • SP0PW3 (14)
  • SP3019 (104)
  • SP4019 (96)
  • SP4036 (6)
  • SP4066 (11)
  • SP4093 (6)
  • SP61EJ (15)
  • SPADAP (27)
  • SPN3W1 (8)
  • SPN4W2 (16)
  • SPSREJ (4)
  • THM (174)
  • THM-X (112)
  • THMF-X (49)
  • TN10P (259)
  • TN10U (170)
  • TN15M (223)
  • TN15U (156)
  • TN2000 (168)
  • TN20K (227)
  • TN20P (244)
  • TN30M (236)
  • TN30P (158)
  • TN4000 (148)
  • TN5015 (197)
  • TN5020 (212)
  • TN5105 (151)
  • TN5120 (233)
  • TN6010 (173)
  • TN6025 (190)
  • TN7005 (144)
  • TN7010 (235)
  • TN7015 (236)
  • TN7025 (235)
  • TN7035 (202)
  • TN7105 (153)
  • TN7110 (255)
  • TN7115 (233)
  • TN7125 (217)
  • TN7135 (208)
  • TN8025 (200)
  • TTI15 (121)
  • TTM (8)
  • TTM09 (44)
  • TTR (84)
  • TTR-X (16)
  • TTS (122)
  • TTX (103)
  • W00342 (37)
  • WBH10C (123)
  • WBH10P (89)
  • WBH10U (105)
  • WBH20P (119)
  • WBH25P (90)
  • WBH25U (127)
  • WBH30P (89)
  • WBK40U (62)
  • WBK45U (115)
  • WDN00U (57)
  • WDN25U (106)
  • WK05CT (215)
  • WK15CT (148)
  • WK20CT (249)
  • WM15CT (236)
  • WM25CT (236)
  • WM35CT (179)
  • WP05CT (42)
  • WP15CT (255)
  • WP20TT (20)
  • WP25CT (250)
  • WP35CT (245)
  • WS10PT (205)
  • WS25PT (195)
  • WU10HT (231)
  • WU10PT (22)
  • WU25PT (13)
  • X00511 (34)
  • YY3A00 (1)
Hand Of Tool
  • L (114)
  • N (20)
  • R (125)
Wiper Insert
  • N (380)
  • Y (130)
Minimum Axial Groove Diameter
  • 0.0 (16)
  • 0.7283 (2)
  • 0.748 (2)
  • 0.7874 (10)
  • 0.9449 (3)
  • 0.9646 (1)
  • 0.9843 (13)
  • 1.2598 (29)
  • 1.2992 (4)
  • 1.3189 (2)
  • 1.3386 (2)
  • 1.5157 (6)
  • 1.5748 (31)
  • 1.626 (4)
  • 1.874 (4)
  • 1.8898 (4)
  • 1.9094 (6)
  • 1.9685 (30)
  • 1.969 (2)
  • 2.0669 (1)
  • 2.0866 (2)
  • 2.252 (4)
  • 2.4409 (4)
  • 2.48 (2)
  • 2.4803 (13)
  • 2.5197 (2)
  • 2.5591 (6)
  • 2.5787 (1)
  • 2.5984 (2)
  • 2.6772 (1)
  • 2.9525 (1)
  • 2.9528 (3)
  • 3.1496 (2)
  • 3.189 (3)
  • 3.5 (4)
  • 3.5433 (9)
  • 4.3307 (64)
  • 4.331 (8)
  • 4.921 (2)
  • 4.9213 (23)
  • 5.5 (4)
  • 5.9449 (2)
  • 6.4961 (7)
  • 6.6929 (1)
  • 6.874 (4)
  • 7.087 (2)
  • 8.252 (4)
  • 8.2677 (2)
  • 8.465 (2)
  • 8.752 (4)
  • 8.7795 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (8)
  • 18.5 (2)
  • 19.0 (2)
  • 20.0 (10)
  • 24.0 (3)
  • 24.5 (1)
  • 25.0 (13)
  • 32.0 (29)
  • 33.0 (4)
  • 33.5 (2)
  • 34.0 (2)
  • 38.5 (6)
  • 40.0 (31)
  • 41.3 (4)
  • 47.6 (4)
  • 48.0 (4)
  • 48.5 (6)
  • 50.0 (32)
  • 52.5 (1)
  • 53.0 (2)
  • 57.2 (4)
  • 62.0 (4)
  • 63.0 (15)
  • 64.0 (2)
  • 65.0 (6)
  • 65.5 (1)
  • 66.0 (2)
  • 68.0 (1)
  • 75.0 (4)
  • 80.0 (2)
  • 81.0 (3)
  • 88.9 (4)
  • 90.0 (9)
  • 110.0 (72)
  • 125.0 (25)
  • 139.7 (4)
  • 151.0 (2)
  • 165.0 (7)
  • 170.0 (1)
  • 174.6 (4)
  • 180.0 (2)
  • 209.6 (4)
  • 215.0 (2)
  • 222.3 (4)
  • 223.0 (2)
  • 510.0 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (53)
to
Maximum Axial Groove Diameter
  • 393.661 (53)
to
Cutting Direction
  • B (52)
  • E (89)
  • P (2)
  • S (116)
Rake Angle Style
  • DOUBLE NEGATIVE (122)
  • NEGATIVE-ZERO (46)
  • NEUTRAL (ZERO) (45)
Maximum Bore Depth
  • 34.8 (2)
  • 36.0 (4)
  • 36.8 (2)
  • 42.0 (4)
  • 46.0 (4)
  • 47.0 (4)
  • 48.0 (2)
  • 48.84 (1)
  • 48.87 (1)
  • 50.0 (1)
  • 51.0 (2)
  • 52.0 (18)
  • 54.0 (2)
  • 56.0 (9)
  • 60.0 (44)
  • 62.0 (4)
  • 63.8 (2)
  • 64.0 (8)
  • 64.12 (2)
  • 64.4 (2)
  • 65.0 (56)
  • 66.0 (6)
  • 67.0 (13)
  • 68.0 (4)
  • 72.0 (2)
  • 74.0 (4)
  • 80.0 (10)
  • 80.3 (1)
  • 83.29 (2)
  • 84.0 (8)
  • 88.0 (9)
  • 88.4 (2)
  • 89.0 (2)
  • 94.0 (2)
  • 98.18 (2)
  • 99.32 (2)
  • 100.0 (4)
  • 105.6 (2)
  • 110.2 (2)
  • 111.0 (1)
  • 111.02 (1)