Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Ferramentas combinadas

Select Filters
Filters
Filters
Filters
View filters in
Metric
Mais contatos
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (237)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (237)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (237)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (237)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (237)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (237)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (237)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (200)
  • M Stainless Steel (143)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (143)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (143)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (123)
  • K Cast Iron (240)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (240)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (240)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (240)
  • N Non-Ferrous Materials (146)
    • N1
      Wrought Aluminum
      (146)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (146)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (146)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (146)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (146)
    • N6
      Carbon, Graphite Composites, CFRP
      (146)
    • N7
      MMC's
      (126)
  • S High-Temp Alloys (123)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (123)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (123)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (123)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (123)
  • H Hardened Materials (115)
    • H1
      Hardened Materials 44-48 HRC
      (115)
    • H2
      Hardened Materials 48-55 HRC
      (115)
    • H3
      Hardened Materials 56-60 HRC
      (115)
    • H4
      Hardened Materials >60 HRC
      (115)
  • C CFRP Materials (26)
    • C1
      CFRP, CFRP / CFRP
      (16)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (16)
    • C3
      CFRP / Titanium CFRP / High Temp
      (11)
    • C4
      CFRP / Stainless Steel
      (11)
Select First Choice
  • IN (3)
Applications
Applications
  • Counterboring Counterboring (94)
  • Countersinking Countersinking (184)
  • Drilling Drilling (226)
  • Inclined Exit Drilling Inclined Exit Drilling (144)
  • Stacked Plates Drilling Stacked Plates Drilling (70)
Cutting Diameter
Cutting Diameter
  • 0.125 in (2)
  • 0.134 in (2)
  • 0.157 in (3)
  • 0.161 in (2)
  • 0.181 in (2)
  • 0.182 in (2)
  • 0.1901 in (5)
  • 0.201 in (2)
  • 0.218 in (2)
  • 0.2188 in (4)
  • 0.236 in (3)
  • 0.24 in (2)
  • 0.25 in (8)
  • 0.287 in (2)
  • 0.3125 in (6)
  • 0.315 in (5)
  • 0.3189 in (2)
  • 0.319 in (3)
  • 0.3268 in (2)
  • 0.3281 in (2)
  • 0.332 in (2)
  • 0.3346 in (3)
  • 0.3354 in (2)
  • 0.3386 in (3)
  • 0.339 in (2)
  • 0.3425 in (3)
  • 0.3438 in (2)
  • 0.3465 in (3)
  • 0.348 in (2)
  • 0.3504 in (2)
  • 0.3543 in (2)
  • 0.358 in (3)
  • 0.3583 in (2)
  • 0.3594 in (2)
  • 0.368 in (2)
  • 0.3701 in (2)
  • 0.375 in (7)
  • 0.3906 in (2)
  • 0.3937 in (3)
  • 0.394 in (3)
  • 0.3946 in (2)
  • 0.397 in (2)
  • 0.3976 in (2)
  • 0.398 in (2)
  • 0.4016 in (3)
  • 0.404 in (2)
  • 0.4055 in (3)
  • 0.4063 in (4)
  • 0.4094 in (3)
  • 0.413 in (2)
  • 0.4134 in (2)
  • 0.4173 in (2)
  • 0.4219 in (2)
  • 0.4252 in (2)
  • 0.4331 in (2)
  • 0.437 in (4)
  • 0.4375 in (3)
  • 0.4409 in (2)
  • 0.4528 in (2)
  • 0.4531 in (2)
  • 0.4606 in (2)
  • 0.4646 in (2)
  • 0.4685 in (2)
  • 0.472 in (3)
  • 0.4724 in (2)
  • 0.48 in (2)
  • 0.4803 in (2)
  • 0.4844 in (2)
  • 0.4921 in (2)
  • 0.5 in (2)
  • 0.5039 in (2)
  • 0.5118 in (2)
  • 0.5156 in (2)
  • 0.516 in (2)
  • 0.5197 in (2)
  • 0.551 in (3)
  • 0.5512 in (4)
  • 0.555 in (2)
  • 0.5551 in (3)
  • 0.5591 in (4)
  • 0.5625 in (5)
  • 0.563 in (4)
  • 0.5669 in (3)
  • 0.5709 in (2)
  • 0.5748 in (2)
  • 0.5774 in (2)
  • 0.5781 in (2)
  • 0.5787 in (2)
  • 0.5827 in (2)
  • 0.5866 in (2)
  • 0.5906 in (3)
  • 0.5938 in (2)
  • 0.6102 in (3)
  • 0.625 in (5)
  • 0.6299 in (3)
  • 0.63 in (3)
  • 0.6496 in (3)
  • 0.6693 in (3)
  • 0.6875 in (3)
  • 0.689 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.175 mm (2)
  • 3.4 mm (3)
  • 4.0 mm (4)
  • 4.1 mm (3)
  • 4.6 mm (3)
  • 4.623 mm (2)
  • 4.828 mm (5)
  • 5.1 mm (3)
  • 5.55 mm (3)
  • 5.558 mm (5)
  • 6.0 mm (4)
  • 6.1 mm (3)
  • 6.35 mm (8)
  • 7.3 mm (3)
  • 7.938 mm (6)
  • 8.0 mm (5)
  • 8.1 mm (5)
  • 8.3 mm (2)
  • 8.334 mm (2)
  • 8.433 mm (2)
  • 8.5 mm (3)
  • 8.52 mm (2)
  • 8.6 mm (3)
  • 8.611 mm (2)
  • 8.7 mm (3)
  • 8.733 mm (2)
  • 8.8 mm (3)
  • 8.839 mm (2)
  • 8.9 mm (2)
  • 9.0 mm (2)
  • 9.1 mm (4)
  • 9.129 mm (2)
  • 9.347 mm (2)
  • 9.4 mm (2)
  • 9.525 mm (7)
  • 9.921 mm (2)
  • 10.0 mm (6)
  • 10.023 mm (2)
  • 10.084 mm (2)
  • 10.1 mm (4)
  • 10.2 mm (3)
  • 10.262 mm (2)
  • 10.3 mm (3)
  • 10.32 mm (3)
  • 10.4 mm (3)
  • 10.49 mm (2)
  • 10.5 mm (2)
  • 10.6 mm (2)
  • 10.8 mm (2)
  • 11.0 mm (2)
  • 11.1 mm (4)
  • 11.2 mm (2)
  • 11.5 mm (2)
  • 11.7 mm (2)
  • 11.8 mm (2)
  • 11.9 mm (2)
  • 12.0 mm (5)
  • 12.2 mm (4)
  • 12.304 mm (2)
  • 12.5 mm (2)
  • 12.7 mm (2)
  • 12.8 mm (2)
  • 13.0 mm (2)
  • 13.096 mm (2)
  • 13.1 mm (2)
  • 13.2 mm (2)
  • 14.0 mm (7)
  • 14.1 mm (5)
  • 14.2 mm (4)
  • 14.288 mm (4)
  • 14.3 mm (4)
  • 14.4 mm (3)
  • 14.5 mm (2)
  • 14.6 mm (2)
  • 14.666 mm (2)
  • 14.684 mm (2)
  • 14.7 mm (2)
  • 14.8 mm (2)
  • 14.9 mm (2)
  • 15.0 mm (3)
  • 15.083 mm (2)
  • 15.1 mm (2)
  • 15.2 mm (2)
  • 15.3 mm (2)
  • 15.38 mm (2)
  • 15.4 mm (2)
  • 15.479 mm (2)
  • 15.5 mm (5)
  • 15.6 mm (2)
  • 15.7 mm (2)
  • 15.8 mm (2)
  • 15.875 mm (4)
  • 15.95 mm (2)
  • 16.0 mm (6)
  • 16.027 mm (2)
  • 16.5 mm (5)
  • 17.0 mm (3)
  • 17.463 mm (3)
  • 17.5 mm (5)
  • 18.0 mm (4)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.6 mm (1)
  • 10.0 mm (1)
  • 10.6 mm (1)
  • 12.3 mm (1)
  • 13.3 mm (1)
  • 13.4 mm (1)
  • 13.7 mm (1)
  • 14.2 mm (1)
  • 14.7 mm (1)
  • 15.6 mm (1)
  • 15.8 mm (1)
  • 15.9 mm (1)
  • 16.6 mm (1)
  • 17.6 mm (1)
  • 17.8 mm (1)
  • 18.2 mm (1)
  • 18.6 mm (1)
  • 19.0 mm (1)
  • 19.3 mm (1)
  • 19.4 mm (2)
  • 19.5 mm (1)
  • 20.3 mm (1)
  • 21.0 mm (1)
  • 21.1 mm (1)
  • 21.5 mm (1)
  • 22.0 mm (1)
  • 22.2 mm (1)
  • 22.5 mm (1)
  • 22.6 mm (1)
  • 22.9 mm (1)
  • 23.2 mm (1)
  • 23.4 mm (1)
  • 23.5 mm (1)
  • 23.9 mm (1)
  • 24.2 mm (1)
  • 24.6 mm (1)
  • 24.9 mm (1)
  • 25.0 mm (10)
  • 25.3 mm (1)
  • 25.4 mm (1)
  • 25.5 mm (1)
  • 26.2 mm (1)
  • 26.5 mm (1)
  • 26.6 mm (2)
  • 26.8 mm (2)
  • 27.0 mm (3)
  • 27.1 mm (1)
  • 27.5 mm (1)
  • 27.7 mm (1)
  • 28.0 mm (1)
  • 28.3 mm (1)
  • 28.5 mm (2)
  • 28.8 mm (1)
  • 29.1 mm (1)
  • 29.5 mm (1)
  • 29.6 mm (1)
  • 30.0 mm (9)
  • 30.7 mm (1)
  • 31.0 mm (1)
  • 31.2 mm (2)
  • 31.4 mm (1)
  • 31.5 mm (2)
  • 31.7 mm (1)
  • 31.9 mm (1)
  • 32.2 mm (1)
  • 32.4 mm (1)
  • 32.7 mm (1)
  • 32.9 mm (2)
  • 33.0 mm (1)
  • 33.1 mm (2)
  • 33.8 mm (2)
  • 34.3 mm (1)
  • 34.5 mm (2)
  • 34.8 mm (1)
  • 34.9 mm (1)
  • 35.0 mm (1)
  • 35.56 mm (1)
  • 36.0 mm (2)
  • 36.3 mm (1)
  • 36.7 mm (1)
  • 36.9 mm (1)
  • 37.6 mm (1)
  • 38.5 mm (1)
  • 38.6 mm (1)
  • 38.7 mm (1)
  • 39.0 mm (1)
  • 40.2 mm (1)
  • 40.5 mm (1)
  • 40.7 mm (1)
  • 41.4 mm (1)
  • 41.7 mm (1)
  • 42.0 mm (1)
  • 42.2 mm (1)
  • 43.1 mm (1)
  • 43.5 mm (2)
  • 43.6 mm (1)
  • 44.5 mm (1)
  • 45.0 mm (1)
  • 48.0 mm (2)
  • 50.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.3385 in (1)
  • 0.3937 in (1)
  • 0.42 in (1)
  • 0.4843 in (1)
  • 0.52 in (1)
  • 0.53 in (1)
  • 0.54 in (1)
  • 0.56 in (1)
  • 0.58 in (1)
  • 0.61 in (1)
  • 0.62 in (1)
  • 0.63 in (1)
  • 0.6535 in (1)
  • 0.69 in (1)
  • 0.7 in (1)
  • 0.72 in (1)
  • 0.73 in (1)
  • 0.75 in (1)
  • 0.76 in (2)
  • 0.7638 in (1)
  • 0.7677 in (1)
  • 0.8 in (1)
  • 0.83 in (2)
  • 0.85 in (1)
  • 0.87 in (2)
  • 0.8898 in (1)
  • 0.89 in (1)
  • 0.9 in (1)
  • 0.91 in (1)
  • 0.92 in (1)
  • 0.93 in (1)
  • 0.94 in (1)
  • 0.95 in (1)
  • 0.97 in (1)
  • 0.98 in (1)
  • 0.9843 in (10)
  • 1.0 in (3)
  • 1.03 in (1)
  • 1.04 in (1)
  • 1.05 in (2)
  • 1.0551 in (1)
  • 1.06 in (2)
  • 1.063 in (2)
  • 1.07 in (1)
  • 1.08 in (1)
  • 1.09 in (1)
  • 1.1 in (1)
  • 1.11 in (1)
  • 1.12 in (2)
  • 1.13 in (1)
  • 1.15 in (1)
  • 1.16 in (1)
  • 1.17 in (1)
  • 1.18 in (1)
  • 1.1811 in (8)
  • 1.2087 in (1)
  • 1.2205 in (1)
  • 1.2283 in (2)
  • 1.2362 in (1)
  • 1.24 in (1)
  • 1.2402 in (1)
  • 1.248 in (1)
  • 1.2559 in (1)
  • 1.2677 in (1)
  • 1.2756 in (1)
  • 1.2874 in (1)
  • 1.2953 in (2)
  • 1.3 in (1)
  • 1.3031 in (2)
  • 1.3307 in (2)
  • 1.3504 in (1)
  • 1.3583 in (1)
  • 1.36 in (1)
  • 1.3701 in (1)
  • 1.374 in (1)
  • 1.378 in (1)
  • 1.4 in (1)
  • 1.42 in (2)
  • 1.4291 in (1)
  • 1.4449 in (1)
  • 1.4528 in (1)
  • 1.4803 in (1)
  • 1.5157 in (1)
  • 1.5197 in (1)
  • 1.5236 in (1)
  • 1.54 in (1)
  • 1.5827 in (1)
  • 1.59 in (1)
  • 1.6024 in (1)
  • 1.6299 in (1)
  • 1.6417 in (1)
  • 1.65 in (1)
  • 1.6614 in (1)
  • 1.6969 in (1)
  • 1.71 in (2)
  • 1.7165 in (1)
  • 1.752 in (1)
  • 1.77 in (1)
  • 1.89 in (2)
  • 1.9685 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.6535 in (1)
  • 0.7165 in (1)
  • 0.74 in (1)
  • 0.8228 in (1)
  • 0.87 in (1)
  • 0.88 in (1)
  • 0.89 in (1)
  • 0.92 in (1)
  • 0.94 in (1)
  • 0.98 in (1)
  • 1.0 in (1)
  • 1.01 in (1)
  • 1.0433 in (1)
  • 1.09 in (1)
  • 1.1 in (1)
  • 1.12 in (1)
  • 1.14 in (1)
  • 1.16 in (1)
  • 1.1811 in (1)
  • 1.19 in (2)
  • 1.2008 in (1)
  • 1.24 in (1)
  • 1.28 in (2)
  • 1.2992 in (10)
  • 1.3 in (1)
  • 1.33 in (1)
  • 1.34 in (1)
  • 1.35 in (1)
  • 1.3583 in (1)
  • 1.37 in (1)
  • 1.39 in (1)
  • 1.4 in (1)
  • 1.41 in (1)
  • 1.43 in (1)
  • 1.44 in (1)
  • 1.4786 in (2)
  • 1.4797 in (1)
  • 1.48 in (1)
  • 1.49 in (1)
  • 1.4961 in (5)
  • 1.4972 in (1)
  • 1.51 in (1)
  • 1.5156 in (1)
  • 1.52 in (1)
  • 1.56 in (1)
  • 1.57 in (1)
  • 1.58 in (1)
  • 1.59 in (1)
  • 1.6 in (1)
  • 1.6063 in (2)
  • 1.62 in (1)
  • 1.65 in (2)
  • 1.67 in (1)
  • 1.69 in (1)
  • 1.6929 in (1)
  • 1.7 in (1)
  • 1.73 in (2)
  • 1.77 in (1)
  • 1.7756 in (1)
  • 1.78 in (1)
  • 1.8307 in (1)
  • 1.8465 in (1)
  • 1.8583 in (1)
  • 1.8622 in (1)
  • 1.878 in (1)
  • 1.8898 in (1)
  • 1.8937 in (1)
  • 1.9055 in (1)
  • 1.9134 in (1)
  • 1.9291 in (1)
  • 1.9409 in (1)
  • 1.9449 in (1)
  • 1.9567 in (1)
  • 1.9803 in (1)
  • 1.9882 in (2)
  • 2.0 in (1)
  • 2.0276 in (1)
  • 2.0354 in (2)
  • 2.063 in (1)
  • 2.0748 in (1)
  • 2.0906 in (1)
  • 2.0984 in (1)
  • 2.1102 in (1)
  • 2.1142 in (1)
  • 2.1496 in (1)
  • 2.189 in (1)
  • 2.1929 in (1)
  • 2.2126 in (1)
  • 2.2323 in (1)
  • 2.2677 in (1)
  • 2.3228 in (1)
  • 2.3386 in (1)
  • 2.3504 in (1)
  • 2.3583 in (1)
  • 2.4291 in (1)
  • 2.4409 in (1)
  • 2.4803 in (1)
  • 2.6063 in (2)
  • 2.685 in (2)
  • 2.8504 in (2)
Reach Min to Reach Max
Reach
Reach
  • 16.6 mm (1)
  • 18.2 mm (1)
  • 18.9 mm (1)
  • 20.9 mm (1)
  • 22.0 mm (1)
  • 22.3 mm (1)
  • 22.7 mm (1)
  • 23.3 mm (1)
  • 23.9 mm (1)
  • 25.0 mm (1)
  • 25.5 mm (1)
  • 25.6 mm (1)
  • 26.5 mm (1)
  • 27.7 mm (1)
  • 28.0 mm (1)
  • 28.5 mm (1)
  • 29.0 mm (1)
  • 29.5 mm (1)
  • 30.0 mm (1)
  • 30.2 mm (1)
  • 30.3 mm (1)
  • 30.5 mm (1)
  • 31.5 mm (1)
  • 32.4 mm (1)
  • 32.6 mm (1)
  • 33.0 mm (10)
  • 33.1 mm (1)
  • 33.7 mm (1)
  • 34.0 mm (1)
  • 34.4 mm (1)
  • 34.5 mm (1)
  • 34.9 mm (1)
  • 35.3 mm (1)
  • 35.5 mm (1)
  • 35.7 mm (1)
  • 36.2 mm (1)
  • 36.5 mm (1)
  • 37.5 mm (1)
  • 37.9 mm (1)
  • 38.0 mm (10)
  • 38.4 mm (1)
  • 38.5 mm (1)
  • 39.6 mm (1)
  • 40.0 mm (1)
  • 40.1 mm (1)
  • 40.4 mm (1)
  • 40.6 mm (1)
  • 40.8 mm (2)
  • 41.2 mm (1)
  • 41.8 mm (1)
  • 42.0 mm (1)
  • 42.4 mm (1)
  • 42.8 mm (1)
  • 43.0 mm (1)
  • 43.1 mm (1)
  • 43.9 mm (1)
  • 44.0 mm (1)
  • 44.9 mm (1)
  • 45.1 mm (2)
  • 46.5 mm (1)
  • 46.9 mm (1)
  • 47.2 mm (1)
  • 47.3 mm (1)
  • 47.7 mm (1)
  • 48.0 mm (1)
  • 48.1 mm (1)
  • 48.4 mm (1)
  • 48.6 mm (1)
  • 49.0 mm (1)
  • 49.3 mm (1)
  • 49.4 mm (1)
  • 49.7 mm (1)
  • 50.3 mm (1)
  • 50.5 mm (2)
  • 50.8 mm (1)
  • 51.5 mm (1)
  • 51.7 mm (2)
  • 52.4 mm (1)
  • 52.7 mm (1)
  • 53.1 mm (1)
  • 53.3 mm (1)
  • 53.6 mm (1)
  • 53.7 mm (1)
  • 54.6 mm (1)
  • 55.6 mm (1)
  • 55.7 mm (1)
  • 56.2 mm (1)
  • 56.7 mm (1)
  • 57.6 mm (1)
  • 59.0 mm (1)
  • 59.4 mm (1)
  • 59.7 mm (1)
  • 59.9 mm (1)
  • 61.7 mm (1)
  • 62.0 mm (1)
  • 63.0 mm (1)
  • 63.331 mm (1)
  • 66.2 mm (2)
  • 68.2 mm (2)
  • 72.4 mm (2)
Reach Min