Notificações

Marcar todas como lidas

Insertos intercambiáveis

Selecionar filtros
Filters
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (570)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (567)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (567)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (570)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (570)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (567)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (540)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (528)
  • M Stainless Steel (554)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (554)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (554)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (528)
  • K Cast Iron (443)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (443)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (443)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (443)
  • N Non-Ferrous Materials (338)
    • N1
      Wrought Aluminum
      (318)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (332)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (302)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (308)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (321)
    • N6
      Carbon, Graphite Composites, CFRP
      (284)
    • N7
      MMC's
      (270)
  • S High-Temp Alloys (502)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (496)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (496)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (502)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (502)
  • H Hardened Materials (64)
    • H1
      Hardened Materials 44-48 HRC
      (64)
    • H2
      Hardened Materials 48-55 HRC
      (59)
    • H3
      Hardened Materials 56-60 HRC
      (59)
    • H4
      Hardened Materials >60 HRC
      (59)
Selecione First Choice
  • BR (55)
  • CN (231)
  • DE (231)
  • GB (164)
  • IN (124)
  • SG (160)
  • US (234)
Applications
Applications
  • ID Thread Turning ID Thread Turning (36)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (51)
  • Interrupted (197)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (186)
  • Stable (309)
  • Unstable (250)
  • Varying Depth of Cut (82)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (12)
  • 1.0 (25)
  • 2.0 (242)
  • 3.0 (155)
  • 4.0 (174)
  • 8.0 (65)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.004 in (9)
  • 0.008 in (58)
  • 0.016 in (213)
  • 0.024 in (6)
  • 0.031 in (236)
  • 0.034 in (9)
  • 0.039 in (21)
  • 0.047 in (64)
  • 0.063 in (15)
  • 0.079 in (9)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.1 mm (9)
  • 0.2 mm (58)
  • 0.4 mm (213)
  • 0.601 mm (6)
  • 0.8 mm (236)
  • 0.851 mm (9)
  • 1.0 mm (21)
  • 1.201 mm (64)
  • 1.6 mm (15)
  • 2.0 mm (9)
Corner Radius Min a Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (51)
  • Interrupted (197)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (186)
  • Stable (309)
  • Unstable (250)
  • Varying Depth of Cut (82)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (11)
  • K313 (16)
  • K68 (2)
  • KC5010 (75)
  • KC5025 (32)
  • KC5410 (14)
  • KC7015 (6)
  • KC7140 (66)
  • KC720 (8)
  • KC7215 (38)
  • KC7225 (1)
  • KC730 (12)
  • KC7315 (14)
  • KCK05 (3)
  • KCK05B (1)
  • KCK15B (4)
  • KCP05 (4)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (5)
  • KCPK10 (40)
  • KCU10 (14)
  • KCU25 (112)
  • KCU40 (119)
  • KD1425 (6)
  • KM1 (6)
  • KMF (11)
  • KT315 (33)
  • KT325 (2)
Wiper Insert
Wiper Insert
  • N (639)
  • Y (34)
Countersunk Angle
Countersunk Angle
  • 30.0 (4)
  • 41.0 (4)
  • 45.0 (18)
Countersunk Angle Min a Countersunk Angle Max
frontEnd
Cutting Width
Cutting Width
  • 0.228 in (1)
  • 0.24 in (1)
  • 0.386 in (2)
Cutting Width Min a Cutting Width Max
Cutting Width
Cutting Width
  • 5.801 mm (1)
  • 6.101 mm (1)
  • 9.8 mm (2)
Cutting Width Min a Cutting Width Max
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (32)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (31)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (177)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (148)
insertGeometry
Shape
Shape
  • B-PARALLELOGRAM 82 (32)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (31)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (177)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (148)
Insert IC Size
Insert IC Size
  • 5.0 mm (7)
  • 5.426 mm (2)
  • 5.551 mm (13)
  • 6.0 mm (44)
  • 6.351 mm (81)
  • 7.801 mm (2)
  • 7.926 mm (16)
  • 7.95 mm (22)
  • 8.0 mm (38)
  • 9.525 mm (109)
  • 10.0 mm (31)
  • 12.0 mm (25)
  • 12.701 mm (150)
  • 15.0 mm (25)
  • 15.726 mm (20)
  • 15.875 mm (13)
  • 17.6 mm (9)
  • 19.05 mm (4)
Insert IC Size Min a Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.197 in (7)
  • 0.214 in (2)
  • 0.219 in (13)
  • 0.237 in (44)
  • 0.25 in (81)
  • 0.307 in (2)
  • 0.312 in (16)
  • 0.313 in (22)
  • 0.315 in (38)
  • 0.375 in (109)
  • 0.394 in (31)
  • 0.473 in (25)
  • 0.5 in (150)
  • 0.591 in (25)
  • 0.619 in (20)
  • 0.625 in (13)
  • 0.694 in (9)
  • 0.75 in (4)
Insert IC Size Min a Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 3.301 mm (7)
  • 3.975 mm (26)
  • 5.2 mm (1)
  • 5.301 mm (24)
  • 5.426 mm (8)
  • 5.65 mm (4)
  • 6.2 mm (12)
  • 6.351 mm (13)
  • 6.45 mm (46)
  • 6.476 mm (7)
  • 6.525 mm (1)
  • 6.625 mm (30)
  • 7.801 mm (15)
  • 7.851 mm (1)
  • 7.926 mm (22)
  • 7.95 mm (24)
  • 9.375 mm (20)
  • 9.525 mm (20)
  • 9.625 mm (3)
  • 9.675 mm (66)
  • 9.826 mm (1)
  • 9.925 mm (24)
  • 11.0 mm (3)
  • 11.525 mm (1)
  • 11.625 mm (4)
  • 11.65 mm (4)
  • 12.55 mm (14)
  • 12.701 mm (33)
  • 12.9 mm (112)
  • 13.75 mm (3)
  • 15.726 mm (20)
  • 16.125 mm (4)
  • 16.5 mm (3)
  • 19.35 mm (4)
Cutting Edge Length Min a Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.13 in (7)
  • 0.156 in (26)
  • 0.206 in (1)
  • 0.209 in (24)
  • 0.214 in (8)
  • 0.222 in (4)
  • 0.244 in (12)
  • 0.25 in (13)
  • 0.254 in (46)
  • 0.255 in (7)
  • 0.257 in (1)
  • 0.261 in (30)
  • 0.307 in (15)
  • 0.309 in (1)
  • 0.312 in (22)
  • 0.313 in (24)
  • 0.369 in (20)
  • 0.375 in (20)
  • 0.379 in (3)
  • 0.381 in (66)
  • 0.387 in (1)
  • 0.391 in (24)
  • 0.433 in (3)
  • 0.454 in (1)
  • 0.458 in (4)
  • 0.459 in (4)
  • 0.494 in (14)
  • 0.5 in (33)
  • 0.508 in (112)
  • 0.541 in (3)
  • 0.619 in (20)
  • 0.635 in (4)
  • 0.65 in (3)
  • 0.762 in (4)
Cutting Edge Length Min a Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 11 (5)
  • 20 (33)
  • 21 (30)
  • 22 (4)
  • DS (34)
  • FF (3)
  • FN (29)
  • FP (31)
  • FW (16)
  • GD (49)
  • HD (4)
  • HP (144)
  • HPF (5)
  • LD (13)
  • LF (71)
  • LP (12)
  • MD (79)
  • MP (7)
  • MW (18)
  • RP (9)
  • UF (4)
Cutting Tool Material
Cutting Tool Material
  • D P (6)
  • H T (34)
  • H W (633)
Tolerance Class
Tolerance Class
  • G (152)
  • H (12)
  • M (142)
  • P (62)
No filters matching ""
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.
Você está prestes a criar uma duplicata . Deseja continuar?
Você está prestes a excluir Deseja continuar?
Como você gostaria de renomear ?
Digite um nome válido
Digite um nome para a duplicação
Digite um nome válido
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
Digite um nome válido
Enviar uma cópia de

Digite um e-mail válido
Digite um nome válido

Encontramos os seguintes trefilamentos de CAD

Selecione os arquivos que procura e baixe todos de uma vez

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho