Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Tem uma pergunta específica sobre o produto?

Veja uma lista completa de profissionais de serviços globais por área de especialização

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Voltar à solução

Editando solução

Adicionando solução

Nome da solução: {{SolutionName}}

Fresas de canto

Selecionar filtros
Filters
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1186)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1067)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1067)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1067)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1067)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1073)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1174)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1174)
  • M Stainless Steel (1176)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1176)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1173)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1173)
  • K Cast Iron (1029)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1029)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1022)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1022)
  • N Non-Ferrous Materials (649)
    • N1
      Wrought Aluminum
      (649)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (642)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (642)
  • S High-Temp Alloys (1149)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1053)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1053)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1053)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1149)
  • H Hardened Materials (722)
    • H1
      Hardened Materials 44-48 HRC
      (722)
Selecione First Choice
  • BR (62)
  • CN (379)
  • DE (383)
  • GB (219)
  • IN (78)
  • SG (154)
  • US (341)
Applications
Applications
  • Drilling Drilling (1)
  • Face Milling Face Milling (660)
  • ID Thread Turning ID Thread Turning (24)
  • Pocket Pocket (345)
  • Pocket Helical Pocket Helical (343)
  • Pocket Milling Pocket Milling (375)
  • Pocket Plunge Milling Pocket Plunge Milling (1)
  • Profile Milling Profile Milling (33)
  • Ramping Ramping (371)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (122)
  • Shoulder Milling Shoulder Milling (661)
  • Shoulder Roughing Shoulder Roughing (438)
  • Shoulder Square End Shoulder Square End (571)
  • Slot Milling Slot Milling (394)
  • Slot Side Slot Side (51)
  • Slot Square End Slot Square End (400)
  • Slot T Slot T (26)
Cutting Diameter
Cutting Diameter
  • 0.468 in (1)
  • 0.473 in (2)
  • 0.496 in (1)
  • 0.5 in (1)
  • 0.62 in (1)
  • 0.625 in (9)
  • 0.63 in (10)
  • 0.709 in (1)
  • 0.745 in (1)
  • 0.75 in (23)
  • 0.787 in (25)
  • 0.866 in (1)
  • 0.875 in (2)
  • 0.969 in (1)
  • 0.971 in (1)
  • 0.984 in (40)
  • 1.0 in (50)
  • 1.1 in (1)
  • 1.102 in (1)
  • 1.25 in (42)
  • 1.252 in (11)
  • 1.26 in (55)
  • 1.339 in (1)
  • 1.379 in (1)
  • 1.499 in (1)
  • 1.5 in (36)
  • 1.504 in (1)
  • 1.575 in (44)
  • 1.655 in (1)
  • 1.969 in (32)
  • 2.0 in (47)
  • 2.244 in (1)
  • 2.48 in (31)
  • 2.5 in (28)
  • 3.0 in (46)
  • 3.15 in (25)
  • 3.938 in (15)
  • 4.0 in (20)
  • 4.921 in (12)
  • 5.0 in (12)
  • 6.0 in (16)
  • 6.299 in (10)
  • 7.875 in (4)
  • 8.0 in (6)
  • 10.0 in (3)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 11.875 mm (1)
  • 12.0 mm (2)
  • 12.601 mm (1)
  • 12.701 mm (1)
  • 15.75 mm (1)
  • 15.875 mm (9)
  • 16.0 mm (10)
  • 18.0 mm (1)
  • 18.925 mm (1)
  • 19.05 mm (23)
  • 20.0 mm (25)
  • 22.0 mm (1)
  • 22.225 mm (2)
  • 24.6 mm (1)
  • 24.651 mm (1)
  • 25.0 mm (40)
  • 25.401 mm (50)
  • 27.951 mm (1)
  • 28.0 mm (1)
  • 31.75 mm (42)
  • 31.8 mm (11)
  • 32.0 mm (55)
  • 34.0 mm (1)
  • 35.0 mm (1)
  • 38.075 mm (1)
  • 38.1 mm (36)
  • 38.2 mm (1)
  • 40.0 mm (44)
  • 42.0 mm (1)
  • 50.0 mm (32)
  • 50.801 mm (47)
  • 57.0 mm (1)
  • 63.0 mm (31)
  • 63.5 mm (28)
  • 76.2 mm (46)
  • 80.0 mm (25)
  • 100.0 mm (15)
  • 101.601 mm (20)
  • 125.0 mm (12)
  • 127.0 mm (12)
  • 152.4 mm (16)
  • 160.0 mm (10)
  • 200.0 mm (4)
  • 203.201 mm (6)
  • 254.0 mm (3)
Cutting Diameter Min a Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.401 mm (1)
  • 38.1 mm (1)
Maximum Cutting Diameter Min a Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.0 in (1)
  • 1.5 in (1)
Maximum Cutting Diameter Min a Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.575 mm (10)
  • 6.926 mm (2)
  • 6.95 mm (3)
  • 6.976 mm (2)
  • 9.15 mm (29)
  • 9.175 mm (15)
  • 9.675 mm (1)
  • 9.701 mm (3)
  • 9.726 mm (1)
  • 9.75 mm (3)
  • 9.775 mm (2)
  • 9.8 mm (1)
  • 9.826 mm (3)
  • 9.875 mm (16)
  • 9.9 mm (1)
  • 9.925 mm (4)
  • 9.951 mm (18)
  • 10.0 mm (2)
  • 10.025 mm (18)
  • 10.05 mm (12)
  • 10.076 mm (7)
  • 10.101 mm (10)
  • 10.25 mm (2)
  • 11.0 mm (63)
  • 12.125 mm (4)
  • 12.15 mm (24)
  • 14.0 mm (18)
  • 14.101 mm (6)
  • 14.201 mm (2)
  • 14.3 mm (11)
  • 14.4 mm (9)
  • 14.476 mm (6)
  • 14.5 mm (9)
  • 14.601 mm (16)
  • 14.701 mm (3)
  • 14.726 mm (6)
  • 15.5 mm (73)
  • 15.9 mm (3)
  • 15.951 mm (2)
  • 15.976 mm (2)
  • 16.0 mm (32)
  • 16.1 mm (2)
  • 16.2 mm (2)
  • 16.401 mm (7)
  • 17.0 mm (3)
  • 17.401 mm (23)
  • 17.5 mm (4)
  • 17.6 mm (5)
  • 17.7 mm (7)
  • 17.8 mm (3)
  • 17.901 mm (4)
  • 18.0 mm (36)
  • 18.675 mm (8)
  • 18.8 mm (3)
  • 18.925 mm (4)
  • 26.901 mm (2)
  • 27.201 mm (1)
  • 27.3 mm (1)
  • 27.5 mm (1)
  • 27.6 mm (1)
  • 27.75 mm (2)
  • 27.776 mm (1)
  • 27.8 mm (2)
  • 35.926 mm (1)
  • 35.95 mm (1)
  • 36.0 mm (2)
  • 36.375 mm (3)
  • 39.901 mm (2)
  • 39.95 mm (2)
  • 40.401 mm (2)
  • 40.801 mm (2)
  • 40.95 mm (1)
  • 44.325 mm (4)
  • 44.776 mm (4)
  • 44.801 mm (2)
  • 50.875 mm (2)
  • 51.0 mm (1)
  • 52.801 mm (1)
  • 52.825 mm (1)
  • 52.85 mm (1)
  • 53.45 mm (1)
  • 53.5 mm (1)
  • 54.0 mm (1)
  • 54.1 mm (1)
  • 54.401 mm (3)
  • 54.426 mm (3)
  • 54.825 mm (1)
  • 57.0 mm (1)
  • 60.776 mm (1)
  • 61.0 mm (1)
  • 65.0 mm (2)
  • 65.15 mm (1)
  • 70.95 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 77.051 mm (4)
  • 77.075 mm (1)
  • 77.525 mm (1)
  • 77.551 mm (1)
  • 78.351 mm (1)
  • 78.375 mm (3)
  • 80.0 mm (1)
  • 81.176 mm (1)
  • 81.2 mm (1)
  • 85.025 mm (1)
  • 86.075 mm (1)
  • 94.0 mm (2)
  • 100.0 mm (1)
  • 101.5 mm (1)
  • 101.601 mm (1)
  • 101.625 mm (1)
  • 102.2 mm (3)
  • 102.226 mm (1)
  • 107.25 mm (2)
  • 107.275 mm (1)
  • 107.601 mm (3)
  • 110.0 mm (1)
  • 132.275 mm (3)
  • 132.9 mm (1)
  • 133.0 mm (2)
  • 133.675 mm (2)
  • 134.451 mm (1)
  • 184.851 mm (2)
  • 236.05 mm (2)
Cutting Length Min a Cutting Length Max
Cutting Length
Cutting Length
  • 0.259 in (10)
  • 0.273 in (2)
  • 0.274 in (3)
  • 0.275 in (2)
  • 0.36 in (29)
  • 0.361 in (15)
  • 0.381 in (1)
  • 0.382 in (3)
  • 0.383 in (1)
  • 0.384 in (3)
  • 0.385 in (2)
  • 0.386 in (1)
  • 0.387 in (3)
  • 0.389 in (16)
  • 0.39 in (1)
  • 0.391 in (4)
  • 0.392 in (18)
  • 0.394 in (2)
  • 0.395 in (18)
  • 0.396 in (12)
  • 0.397 in (7)
  • 0.398 in (10)
  • 0.404 in (2)
  • 0.433 in (63)
  • 0.478 in (4)
  • 0.479 in (24)
  • 0.551 in (18)
  • 0.555 in (6)
  • 0.559 in (2)
  • 0.564 in (11)
  • 0.568 in (9)
  • 0.571 in (6)
  • 0.572 in (9)
  • 0.576 in (16)
  • 0.579 in (3)
  • 0.58 in (6)
  • 0.61 in (73)
  • 0.626 in (3)
  • 0.628 in (2)
  • 0.629 in (2)
  • 0.63 in (32)
  • 0.634 in (2)
  • 0.638 in (2)
  • 0.646 in (7)
  • 0.669 in (3)
  • 0.685 in (23)
  • 0.69 in (4)
  • 0.694 in (5)
  • 0.698 in (7)
  • 0.702 in (3)
  • 0.705 in (4)
  • 0.709 in (36)
  • 0.735 in (8)
  • 0.74 in (3)
  • 0.745 in (4)
  • 1.059 in (2)
  • 1.071 in (1)
  • 1.075 in (1)
  • 1.083 in (1)
  • 1.087 in (1)
  • 1.093 in (2)
  • 1.094 in (3)
  • 1.414 in (1)
  • 1.415 in (1)
  • 1.417 in (2)
  • 1.432 in (3)
  • 1.571 in (2)
  • 1.573 in (2)
  • 1.591 in (2)
  • 1.606 in (2)
  • 1.612 in (1)
  • 1.745 in (4)
  • 1.764 in (6)
  • 2.003 in (2)
  • 2.008 in (1)
  • 2.079 in (1)
  • 2.08 in (1)
  • 2.081 in (1)
  • 2.104 in (1)
  • 2.106 in (1)
  • 2.126 in (1)
  • 2.13 in (1)
  • 2.142 in (3)
  • 2.144 in (3)
  • 2.158 in (1)
  • 2.244 in (1)
  • 2.394 in (1)
  • 2.402 in (1)
  • 2.559 in (2)
  • 2.565 in (1)
  • 2.793 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.035 in (5)
  • 3.052 in (1)
  • 3.053 in (1)
  • 3.085 in (1)
  • 3.086 in (3)
  • 3.15 in (1)
  • 3.196 in (1)
  • 3.197 in (1)
  • 3.347 in (1)
  • 3.39 in (1)
  • 3.701 in (2)
  • 3.938 in (1)
  • 3.996 in (1)
  • 4.0 in (1)
  • 4.001 in (1)
  • 4.024 in (3)
  • 4.025 in (1)
  • 4.222 in (2)
  • 4.223 in (1)
  • 4.236 in (3)
  • 4.331 in (1)
  • 5.208 in (3)
  • 5.232 in (1)
  • 5.236 in (2)
  • 5.263 in (2)
  • 5.293 in (1)
  • 7.279 in (2)
  • 9.294 in (2)
Cutting Length Min a Cutting Length Max
Reach
Reach
  • 0.709 in (1)
  • 0.75 in (1)
  • 0.787 in (4)
  • 0.8 in (1)
  • 0.972 in (1)
  • 0.984 in (8)
  • 0.987 in (1)
  • 0.999 in (1)
  • 1.0 in (8)
  • 1.053 in (4)
  • 1.1 in (12)
  • 1.102 in (17)
  • 1.239 in (2)
  • 1.249 in (2)
  • 1.25 in (15)
  • 1.26 in (14)
  • 1.289 in (1)
  • 1.312 in (1)
  • 1.379 in (4)
  • 1.393 in (1)
  • 1.417 in (2)
  • 1.5 in (8)
  • 1.536 in (4)
  • 1.564 in (2)
  • 1.574 in (2)
  • 1.575 in (108)
  • 1.589 in (2)
  • 1.6 in (7)
  • 1.614 in (2)
  • 1.625 in (2)
  • 1.687 in (2)
  • 1.688 in (1)
  • 1.693 in (5)
  • 1.73 in (1)
  • 1.732 in (7)
  • 1.75 in (53)
  • 1.752 in (5)
  • 1.772 in (5)
  • 1.79 in (1)
  • 1.811 in (2)
  • 1.879 in (2)
  • 1.889 in (2)
  • 1.891 in (2)
  • 1.901 in (2)
  • 1.929 in (9)
  • 1.967 in (1)
  • 1.969 in (85)
  • 1.97 in (1)
  • 2.0 in (39)
  • 2.091 in (2)
  • 2.116 in (1)
  • 2.126 in (3)
  • 2.188 in (1)
  • 2.189 in (1)
  • 2.23 in (2)
  • 2.25 in (30)
  • 2.253 in (1)
  • 2.362 in (2)
  • 2.375 in (6)
  • 2.38 in (21)
  • 2.4 in (2)
  • 2.48 in (26)
  • 2.5 in (9)
  • 2.559 in (4)
  • 2.625 in (2)
  • 2.677 in (1)
  • 2.75 in (3)
  • 2.953 in (11)
  • 2.992 in (1)
  • 2.997 in (1)
  • 3.0 in (8)
  • 3.15 in (3)
  • 3.25 in (1)
  • 3.346 in (1)
  • 3.5 in (8)
  • 3.543 in (1)
  • 3.688 in (1)
  • 3.74 in (5)
  • 3.75 in (4)
  • 3.858 in (1)
  • 4.0 in (3)
  • 4.033 in (1)
  • 4.055 in (1)
  • 4.173 in (2)
  • 4.187 in (1)
  • 4.188 in (1)
  • 4.25 in (3)
  • 4.252 in (3)
  • 4.437 in (1)
  • 4.5 in (3)
  • 4.529 in (2)
  • 4.561 in (1)
  • 4.686 in (2)
  • 4.882 in (2)
  • 5.0 in (4)
  • 5.404 in (1)
  • 5.421 in (1)
  • 5.63 in (1)
  • 5.664 in (3)
  • 6.11 in (1)
  • 6.152 in (1)
  • 6.496 in (2)
  • 7.655 in (2)
  • 8.661 in (1)
  • 9.592 in (2)
Reach Min